Dishwasher
User’s Manual
BDF1640AX
15 8787 0100_BEKO_ODD_E8AU_EN/ 21-06-21.(10:39)
EN
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire user
manual and all other accompanying documents carefully before using the product and
keep it as a reference for future use. If you handover the product to someone else, give
the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
Important information or useful
C
A
hints about usage.
Warning for hazardous situations
with regard to life and property.
Warning for electric shock.
B
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety .......................................4
Intended use ..........................................4
Children’s safety ....................................5
Disposing of packaging material ........5
Transportation of the product ............ 5
Compliance with WEEE Directive and
Disposing of the Waste Product .........6
Compliance with RoHS Directive ........6
Package information ............................6
2 DISHWASHER 7
Overview ................................................7
Fan drying system .................................8
Technical specications .......................8
3 INSTALLATION 9
Appropriate installation location .......9
Connecting water supply .....................9
Connection to the drain .................... 10
Adjusting the feet .............................. 10
Aquasafe+ ...........................................11
Electrical connection ..........................11
Initial use ..............................................11
4 PREPARATION 12
Tips for energy saving ........................12
Detergent .............................................12
Adding Liquid/Gel Detergent and
Rinse Aid ..............................................13
Powder Detergents ............................15
Tablet detergents ...............................16
Cutlery basket .................................... 19
Cutlery basket .................................... 19
Collapsible lower basket tines ......... 20
Collapsible lower basket tines ......... 20
Tray Wash Supports ............................21
SoftTouch Accessory ..........................21
Lower Basket Glass Holder ................21
Lower basket multipurpose / height
adjustable service rack ..................... 22
Lower basket bottle wire .................. 23
Upper basket height adjustable
rack ....................................................... 23
Upper basket multipurpose service
rack ....................................................... 23
Adjusting the height of the upper
basket ..................................................24
Adjusting the height of the upper
basket .................................................. 25
Upper basket multi-function service
rack ....................................................... 26
Collapsible upper basket wires .........27
Height setting with empty basket ...27
Ceiling cutlery basket ........................ 28
Ceiling cutlery basket ........................ 28
Silverware basket piece .................... 29
5 OPERATING THE PRODUCT 30
Programme Selection / Programme
Cancel key .............................................31
Function Keys ......................................31
Preparing the machine.......................31
Programme selection .........................31
Auxiliary functions ............................ 34
Scheduling the washing time ...........37
Starting the programme ....................37
Adjusting the amount of rinse aid ...38
Cancelling the programme ............... 38
Salt indicator ( ) .............................. 38
Rinse Aid indicator ( ) ..................... 38
End of programme ............................. 38
Water cut-o warning ....................... 39
Overowing warning ......................... 39
6 HOMEWHIZ FUNCTION 40
HomeWhiz Setup and User Account
Settings ............................................... 40
7 MAINTENANCE AND
CLEANING 44
Cleaning the outer surface of the
product ................................................44
Cleaning the interior of the machine 44
Cleaning the lters ............................44
Cleaning the hose lter ..................... 45
Cleaning the impellers ...................... 46
Lower impeller .................................... 46
Upper impeller ................................... 46
8 TROUBLESHOOTING 47
instructions for safety and environment
1
This section contains safety
instructions that will help to get
protected from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
• Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
• Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician. The
manufacturer shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
• The water supply and
draining hoses must be
securely fastened and remain
undamaged.
• Unplug the product when not
in use.
• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
• Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
• The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
• Always have the installation
and repairing procedures
carried out by the Authorised
Service Agent. Manufacturer
shall not be held liable for
damages that may arise from
procedures carried out by
unauthorised persons.
• Never use chemical solvents
in the product. They bring
forth the risk of explosion.
• When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
• Never leave the door of
the product open apart
from loading and unloading
procedures.
• Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot steam
when you open the door.
Intended use
• This product has been
designed for domestic use.
• It must be used to do the
domestic type dishes only.
4 / /52 EN
instructions for safety and environment
• This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
• Only dishwasher safe
detergents, rinse aids and
additives must be used.
• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Chldren’s safety
• Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
• Do not forget to close the door
of the product when leaving
the room where it is located.
• Store all detergents and
additives in a safe place away
from the reach of the children.
Dsposng of
packagng materal
Packaging materials are
dangerous to children. Keep
packaging materials in a safe place
away from reach of the children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportaton of the
product
If you need to move the
A
product, do it in upright
position and hold from
the rear side. Slanting
the product onto its
front side may cause the
electronic parts in it get
wet and damaged.
/
5 / 52
EN
instructions for safety and environment
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
Complance wth
WEEE Drectve and
Dsposng of the
Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
Package nformaton
Packaging materials of the
product are manufactured from
recyclable materials in accordance
with our National Environment
Regulations. Do not dispose
of the packaging materials
together with the domestic or
other wastes. Take them to the
packaging material collection
points designated by the local
authorities.
Complance wth RoHS
Drectve
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
6 / /52 EN
2
Dishwasher
Overvew
/
16
16
1. Upper basket
2. Cutlery basket
3. Lower basket
4. Automatic Liquid/Gel Detergent and
Rinse Aid Dosing System
5. Type Label
6. Control panel
7. Door
8 Lower impeller
9. Salt reservoir lid
10. Filters
11. Upper impeller
12. Upper basket rail
13. Upper cutlery basket ( depends on
model )
14. Upper table ( depends on model )
15. Ceiling impeller ( depends on model )
16. Fan drying system ( depends on model )
EN
7 / 52
Dishwasher
Techncal specfcatons
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.03-1.0
Mpa)
Technical specifications may be changed without prior notice to improve the
C
quality of the product.
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the markings of the product or in the printed documents
C
Fan dryng system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
8 / /52 EN
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
3
Installation
Refer to the nearest Authorised Service
Agent for installation of your product. To
make the product ready for use, make sure
that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
Preparation of the location and
C
B
A
electrical, tap water and waste
water installations at the place
of installation is the customer's
responsibility.
Installation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall not
be held responsible for damages
arising from processes carried
out by unauthorised persons.
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
Approprate nstallaton
locaton
• Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.
• Do not install the product at places
where temperature may fall below 0ºC.
• Place the product at least 1 cm away
from the edges of other furniture.
• Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Do not place the product on the
B
• Make sure that you select a location
• Install the product in a place close to
power cable.
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Make sure that the water inlet
C
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product by its door or panel to
move it.
/
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
Connectng water supply
We recommend attaching a
C
filter on the house/apartment
supply water inlet to protect the
machine from damages that
may arise from impurities (sand,
dirt, rust, etc.) coming from the
urban water supply system or
from your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.
9 / 52
EN
Installation
min
300
min
120
max 1000
min 500
Permitted water temperature:
up to 25°C ( 60°C for products
equipped with Aquasafe+; please
refer toAquasafe+ section )
The dishwasher should be connected to cold
water inlet.
• Do not use old or used water inlet hose
on the new product. Use the new water
inlet hose supplied with the product.
• Connect the water inlet hose directly
to the water tap. Pressure coming from
the tap should be minimum 0.3 and
maximum 10 bars. If the water pressure
exceeds 10 bars, a pressure relief valve
should be installed in between.
• Open the taps completely after making
the connections to check for water
leaks.
Use a screw-on hose connector
C
to connect the water inlet hose
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits
from the pipes.
floor. A discharge hose longer than 4 meters
causes dirty washing.
Attach the water discharge hose to the
drainpipe without bending it. Tightly fix the
water discharge hose to the drainpipe in
order to prevent any dislocation of the water
discharge hose during operation of the
product.
Drainpipe must be connected
C
to the sewage system and it
should not be connected to any
surface water.
For your safety, close the water
A
inlet tap completely after the
washing programme is over.
Connecton to the dran
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection must
be min. 50 cm and max. 100 cm from the
10 / /52 EN
Adjustng the feet
If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
Dishwashers door must be
A
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
Installation
Aquasafe+
(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose inlet.
Water contact with the valve box of the
system must be avoided to prevent damage
to the electrical system. If the Aquasafe+
system is damaged, unplug the product and
call the Authorised Service Agent.
As the hose set contains
A
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
• The voltage and allowed fuse or
breaker protection are specified in the
“Technical specifications” section. If the
current value of the fuse or breaker in
the house is less than 16 Amps, have
a qualified electrician install a 16 Amp
fuse.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
Damaged power cables must
B
B
B
be replaced by the Authorised
Service Agent.
If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in case
of failures that may occur on the
lamp.
If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!
Electrcal connecton
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical specifications” table.
The manufacturer shall not be liable for any
damages that will arise when the product is
used without grounding in accordance with
the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy
reach after installation.
Unplug the product after the
B
/
washing programme is over.
Intal use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in sections
“Important safety instructions” and
“Installation”.
• To prepare the product to do the
dishes, perform first operation in the
shortest programme with detergent
while the machine is empty.
There might be a small amount
A
of water left in the product after
factory quality control tests. This
has no harm on the product.
EN
11 / 52
Preparation
4
Tps for energy savng
Following information will help you use the
product in an ecological and energy-efficient
manner.
Wipe away any coarse food remnants on the
dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
Only use the detergents
A
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
Thanks to this system, the amount of rinse
aid and liquid/gel detergent required for the
selected washing programme is adjusted
automatically.
C
produced particularly for
use with dishwashers in the
machine. We recommend you
not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
Please read the information
given in section “Operating
the Product” to activate or
deactivate the Automatic
Liquid/Gel Detergent Dosing
adjustment.
When the Automatic Liquid/Gel
C
C
• Factory settings of the Automatic
• You can proceed to the Settings menu
C
C
Detergent function is enabled,
the Automatic Liquid/Gel
Detergent indicator on the panel
will light up if there is liquid/gel
detergent in the detergent box.
If there is little or no detergent in
the detergent box, the indicator
will flash.
When the Automatic Liquid/Gel
Detergent indicator starts to
flash, there is enough detergent
for at least 5 washing cycles.
Liquid/Gel Detergent Dosing
System are based on the detergent
amount recommended by detergent
manufacturers.
to change the Automatic Liquid/Gel
Detergent Dosing setting according
to your habits, or according to the
recommendations by the detergent
manufacturer if you are using a
different liquid/gel detergent.
Please follow the instructions
given in section “Operating the
Product” to change the settings
of the Automatic Liquid/Gel
Detergent Dosing System and
Rinse Aid.
In addition to liquid/gel
detergents that function only
as a detergent, there are also
liquid/gel detergents that act as
rinse aid and/or soften water.
Follow the manufacturer’s
recommendations when using
these detergents.
12 / /52 EN
Preparation
C
Detergent manufacturer’s recommendations
about the amount of liquid/gel detergent to
be used are as follows:
For lightly soiled dishes 20 ml
For moderately soiled dishes 25 ml
For heavily soiled dishes 30 ml
Some gel-type detergents may
C
not be suitable for automatic
dosing as they are highly
viscous. Apply this type of
detergents onto the inner
surface of the dishwasher’s
door or directly into the
dishwasher, paying attention
to the recommendations of the
detergent manufacturer.
Addng Lqud/Gel
Detergent and Rnse Ad
The Automatic Liquid/Gel Detergent Dosing
system is found on the door of your
dishwasher.
1
2
2. Open the cover shown with (A) in the
picture and add rinse aid. Open the cover
shown with (B), add liquid/gel detergent and
close the covers.
The indicator marked with (C) on
C
C
C
C
your machine informs you about
the liquid/gel detergent level in
the box.
The indicator marked with (D) on
your machine informs you about
the rinse aid level in the box.
Wipe clean any spilled rinse aid
outside the reservoir. Otherwise,
it will cause foaming in the next
washing cycle, reducing the
washing performance of the
product.
The rinse aid used in
dishwashers is a special product
that is recommended to increase
drying efficiency and prevent
water or lime stains on the
washed items. For this reason,
care must be paid to have rinse
aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
After fully opening the door of the
dishwasher, open the decorative cover as
shown with arrows 1 and
A
B
D
/
Using the Automatic Liquid/Gel
Detergent Dosing System
In order to use the Automatic Liquid/Gel
Detergent Dosing function, select Automatic
Liquid/Gel Detergent Dosing function on the
control panel.
When the function is active, its indicator
comes lit and the system uses appropriate
amount of detergent and rinse aid in each
washing program.
13 / 52
EN
Preparation
Press the key again to cancel the
C
C
If you want to use another type of detergent
while the automatic liquid/gel detergent
dosing system is full, cancel the automatic
liquid/gel detergent dosing function on the
control panel. Then you can use powder,
tablet or liquid/gel detergent.
C
A
C
C
Liquid/gel detergents must be used in a
short time once they have been unpacked.
Unpacked liquid/gel detergents may lose
their fluidity in time.
function.
When automatic liquid/gel
detergent dosing function
is selected, do not use other
types (powder, tablet, etc) of
detergents.
Use only liquid/gel detergent
suitable for the dishwasher.
Do not mix different brands of
liquid/gel detergents.
Do not fill the liquid/gel
detergent box with liquids or
chemical cleaners (vinegar,
bleacher etc.) other than liquid/
gel detergent.
Liquid/gel detergents that lost
their fluidity and became firm
must not be used in automatic
liquid/gel detergent dosing
system.
C
C
C
When the detergent warning
lamp gives a warning, it will go
away in a short while after you
add liquid/gel detergent. If the
warning light is still on after a
washing cycle, you can remove
the detergent cartridge, shake it
a few times and reinstall it.
This may occur because of the
blockage of the warning gauge
due to the detergent residues
remained in the cartridges after
a long term use.
To avoid this, it is recommended
to clean the detergent cartridge
thoroughly once in two or three
months.
You can soak it in lukewarm
water, and you can can wash
with tap water.
This way, dosing problems
caused by accumulated
detergent residues, as well
as blockage of the warning
mechanism is prevented and it is
ensured that the system works
properly.
If a different brand or type of
liquid/gel detergent will be used,
make sure previous detergent is
depleted completely and then
remove and clean the liquid/gel
detergent tank under tap water.
Fill the rinse air box only with
rinse aid, and the detergent box
only with liquid/gel detergent.
If you fill it inappropriately,
immediately remove the boxes,
empty them and clean under
running water.
14 / /52 EN
Preparation
A
B
Installing/Removing the Liquid/
Gel Detergent and Rinse Aid Box
Top remove the rinse aid and detergent
boxes, push and lift the system cover on
both sides as shown with arrows 1 and 2 and
open.
1
2
1
Lift and remove the rinse aid box (A).
2
1
Move the detergent box (B) in the direction
of the arrow (1) and lift to remove (2). Once
the cleaning or filling procedure is complete,
follow the above steps in reverse order to
re-install the detergent and rinse aid boxes.
Powder Detergents
You can find the correct amount
C
C
of powder detergent for the
selected programme in the
table "Programme Data and
Consumption Values".
You can apply powder
detergent onto the cover of the
dishwasher or directly into the
machine.
To use powder detergents, go to
C
C
C
TIPS ON LIQUID/GEL DETERGENT
USAGE
After the program finished, if cups and
saucers have stains inside or the color of
them is changed, this may be due to the
one of the following reasons, or even a
combination of more ;
- Colored stains(eg: tea, coffee.) are left in
- Using a short or low temperature wash
- Stale or damp detergent
- Poor quality detergent
- Hard water area without the use of
- Old or scratched crockery. (If you have
Washing algorithm of your dishwasher is
optimized to provide better cleaning. If you
face such kind of problems on your dishes
please;
1. Do not leave your dishes with colored
2. Use longer programs like Eco or
the Settings menu to disable the
Automatic Liquid/Gel Detergent
Dosing System and if any, the
Tablet Detergent function.
Powder detergents must be
used with programmes without
Prewash. See Programme Data
and Consumption Values.
Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending
on the temperature and time.
the cup or saucer for a considerable time
cycle
Rinse Aid
any kind of surface damage to cups, you
are far more likely to see stains.)
stains for a long time
Intensive.
/
15 / 52
EN
Preparation
3. Check quality and storing conditions of
your detergent
4. Check water hardness on your region
and make the necessary changes
needed.
5. Clean your detergent cartridge
periodically (every 3 month) to remove
solid or viscous residues inside. These
residues may cause insufficient dosage.
6. Increase the detergent dosage amount
from the settings to improve the
cleaning performance. ‘’
Tablet detergents
Table detergents exhibit water softening
and / or rinse aid effect in addition to
detergent effect. Some types of these
detergents also contain special-purpose
washing chemicals such as glass and
stainless steel protectors.
Tablet detergents give satisfying
C
results only under certain usage
conditions. The best washing
performance in dishwashers is
obtained by using detergent,
rinse aid and water softening
salt individually.
When using tablet detergents,
C
Tablet detergent types commonly found on
the market:
2in1:
softening salt
3in1:
water softening salt
4in1:
to detergent, rinse aid and water softening
salt
5in1:
protectors in addition to detergent, rinse aid
and water softening salt
C
C
you can use the Tablet
Detergent Function to improve
the drying performance of the
dishwasher (based on model).
Contains detergent, rinse aid or water
Contains detergent, rinse aid and
Contains glass protectors in addition
Contains glass and stainless steel
When using tablet detergents,
follow the manufacturer's
instructions on the packaging.
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using a
tablet detergent.
C
16 / /52 EN
A
Place the tablet detergent into
the Tablet Detergent Box found
on the upper basket of the
dishwasher (A).
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.