Beko B3W5841 User Manual
Washing Machine
User Manual
B3W5841IG
2820530346/ EN/ /
01/07/2022 08:40
Table of Contents
1 Safety Instructions ........................ 4
1.1 Intended Use................................ 4
1.2 Safety of Children, Vulnerable Per-
sons and Pets ..............................
1.3 Electrical Safety ............................ 5
1.4 Handling Safety ............................ 6
1.5 Installation Safety.......................... 6
1.6 Operational Safety ........................ 8
1.7 Maintenance and Cleaning Safety. 9
2 Important Instructions for Envir-
onment ...........................................
2.1 Compliance with WEEE Directive.. 10
2.2 Package Information..................... 10
3 Technical Specifications .............. 11
4 Installation ..................................... 12
4.1 Appropriate Installation Location... 12
4.2 Assembly of Bottom Panel Covers 12
4.3 Removing Transportation Safety
Bolts.............................................
4.4 Connecting to Water Supply......... 13
4.5 Connecting the Drain Hose to the
Drain.............................................
4.6 Adjusting the Stands .................... 14
4.7 Electrical Connection .................... 14
4.8 Start Up........................................ 15
5 Preparation .................................... 15
5.1 Sorting the Laundry ...................... 15
5.2 Preparing Laundry for Washing..... 16
5.3 Tips for Energy and Water Saving. 16
5.4 Loading the Laundry..................... 16
5.5 Correct Load Capacity.................. 16
5.6 Using Detergent and Softener....... 17
5.7 Tips for Efficient Washing.............. 19
5.8 Displayed Programme Duration .... 19
6 Operating the Product .................. 20
6.1 Control Panel................................ 20
6.2 Symbols on the Display ................ 21
6.3 Programme and Consumption
Table ............................................
6.4 Programme Selection ................... 23
6.5 Programmes................................. 24
6.6 Temperature Selection.................. 26
6.7 Spin Speed Selection ................... 27
6.8 Auxiliary Function Selection .......... 27
10
13
14
22
6.8.1 Auxiliary Functions...................... 28
6.8.2 Functions/Programmes Selected by Pressing the Function
4
6.9 End Time ....................................... 30
6.10 Starting the Programme................. 31
6.11 Loading Door Lock ........................ 31
6.12 Changing the Selections After Pro-
6.13 Cancelling the Programme............. 32
6.14 End of Programme......................... 33
6.15 HomeWhiz Feature and Remote
6.15.1 HomeWhiz Setup ....................... 33
6.15.2 Setting up a Washing Machine
6.15.3 Remote Control Function and
6.15.4 Troubleshooting ......................... 36
7 Maintenance and Cleaning............ 36
7.1 Cleaning the Detergent Drawer ...... 36
7.2 Cleaning the Loading Door and
7.3 Cleaning the Body and Control
7.4 Cleaning the Water Intake Filters .... 37
7.5 Draining Remaining Water and
8 Troubleshooting ............................. 38
9 DISCLAIMER / WARNING .............. 42
Keys for 3 Seconds....................
gramme has Started ......................
Control Function ............................
Connected to Someone Else's
Account .....................................
Using It.......................................
the Drum........................................
Panel .............................................
Cleaning the Pump Filter ................
29
32
33
35
35
37
37
37
EN / 2
Please read this user manual first!
Dear Customer,
Thank you for choosing Beko product. We hope that you get the best results from your
product which has been manufactured with high quality and state-of-the-art technology.
Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Follow all warnings and information in the user manual. Thus, you protect yourself and your
product against possible dangers.
Keep the user manual. If you hand over the product to someone else, provide the user
manual as well. Warranty terms, usage and troubleshooting methods of your product are in
user guide.
Symbols and Definitions
The following symbols are used in the user guide:
Danger that could result in death or injury.
Important information or useful hints about usage.
Read the user manual.
Recyclable materials.
Hot surface warning.
WARNING
Danger that may result in property damage to the product or its environment.
EN / 3
1 Safety Instructions
This section includes the safety
instructions necessary to prevent the risk of personal injury or
material damage.
Our company shall not be held
responsible for damages that
may occur if these instructions
are not observed.
• Installation and repair operations shall always be performed by Authorised Service.
• Use original spare parts and
accessories only.
• Do not repair or replace any
component of the product unless it is clearly specified in the
user manual.
• Do not modify the product.
1.1 Intended Use
• The product's bench life is 10
years. During this period, original spare parts will be available to operate the appliance
properly.
• This product has been designed for domestic use. It is
not for commercial purposes
or it should not be used out of
its intended use.
• The product must only be
used for washing and rinsing
of laundry that are marked accordingly
• This appliance is intended to
be used in household and
similar applications. For example;
– Personnel kitchens of
stores, offices and other
work environments;
– Ranches,
– By customers of hotels, mo-
tels and other accommoda-
tion facilities,
– Bed and breakfasts, hostel-
like environments,
– Common areas of apart-
ment blocks or laundries.
1.2 Safety of Children, Vulnerable Persons and Pets
• This product may be used by
children aged 8 years and
older and persons with underdeveloped physical, sensory
or mental capabilities or lack
of experience and knowledge
if they have been given supervision or instruction concern-
EN / 4
ing use of the appliance in a
the product safe way and the
hazards involved.
• Children under the age of 3
should be kept away unless
continuously supervised.
• Electrical products are dangerous for children and pets. Children or pets should not play
with, climb on top or inside the
product. Check inside the
product before use.
• Use child lock to prevent children from intervening with the
product.
• Do not forget to close the
loading door when leaving the
room where the product is
located. Children and pets
may get locked inside and
drown.
• Children should not perform
cleaning and user maintenance works without an adult’s
supervision.
• Keep the packaging materials
away from children. Risk of injury and suffocation.
• Keep all detergents and additives used for the product away
from children’s reach.
• Cut the power cable and
break and deactivate the locking mechanism of the loading
door before disposing of the
product for children’s safety.
1.3 Electrical Safety
• Product should be unplugged
during installation, maintenance, cleaning and repair procedures.
• If the power cable is damaged, it must be replaced by
the authorised service in order
to avoid possible risks.
• Do not tuck the power cable
under and behind the product.
Do not place heavy objects on
the power cable. Do not over
bend, crush and touch the
power cable to sources of
heat.
• Do not use an extension cord,
multi-plug or adaptor to operate your product.
• The plug shall be easily accessible. If this is not possible,
a mechanism that meets the
electrical legislation and that
disconnects all terminals from
the mains (fuse, switch, main
switch, etc.) shall be available
on the electrical installation.
• Do not touch the plug with wet
hands.
EN / 5
• When unplugging the appliance, don't hold the power
cord, but the plug.
• Make sure the plug is not wet,
dirty or dusty.
1.4 Handling Safety
• Unplug the product before
moving, remove the water outlet and water main connections. Drain any water left inside the product.
• The product is heavy, do not
move alone. Do not hold extruding parts such as the laundry loading door to lift and
move the product. The upper
tray should be tightly fixed for
moving.
• Your product is heavy; it
should be carried carefully by
two people if a staircase is involved. It may cause injuries if
your product falls on you. Do
not hit and drop the product
while carrying.
• Carry the product in an upright
position.
• Make sure that the hoses as
well as the power cable are
not folded, pinched or crushed
after the product is fitted into
its place after installation or
cleaning procedures.
1.5 Installation Safety
• Check the information on the
manual and installation instructions to prepare the
product for installation and
make sure the electrical
mains, clean water mains and
water outlet are suitable. If not,
call a qualified electrician and
plumber to have them make
the necessary arrangements.
These operations are the responsibility of the customer.
• Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
• Injuries may occur if hands are
put into uncovered slots.
Close the holes of the transportation safety bolts with
plastic plugs.
• Do not install or leave the
product at locations where it
may be exposed to external
environment conditions.
• Do not install the product at
locations where the temperature drops below 0 ºC.
• Do not place the product on a
carpet or similar surface. It
would create fire hazard since
it cannot receive air from underneath.
EN / 6
• Place the product on a level
and hard surface and balance
with the adjustable legs.
• Connect the product to a
grounding plug protected by a
fuse suitable to the current values on the type label. Make
sure the grounding is carried
out by an expert electrician.
Do not use the product
without suitable grounding to
local/national regulations.
• Plug the product in a socket
with voltage and frequency
values suitable to those indicated on the type label.
• Do not plug the product to
loose, broken, dirty, greasy
sockets or sockets that has
come out their seats or sockets with a risk of water contact.
• Use the new hose set
provided with the product. Do
not re-use old hose sets. Do
not make additions to the
hoses.
• Connect the water inlet hose
directly to the water tap. The
pressure from the tap should
be minimum 0.1 MPa (1 bar)
and maximum 1MPa (10 bars).
10 to 80 litres of water should
be running from the tap in a
minute in order for the product
to function properly. If the water pressure is above 1 MPa
(10 Bars), a pressure-reducing
valve should be fitted. The
maximum allowed temperature is 25°C.
• Fit the end of the water discharge hose to the dirty water
discharge drain, the sink or
the bathtub.
• Place the power cable and
houses in locations without
risk of tripping.
• Do not install the product behind a door, a sliding door or
at another location that will
prevent the door from opening
completely.
• If a drier is to be placed on the
product, fix with a suitable
connection apparatus obtained from the authorised service.
• There is a risk of contact with
electrical pieces when the upper trays is removed. Do not
dismantle the upper tray of the
product.
• Place the product at least 1
cm away from the edges of
furniture.
EN / 7
1.6 Operational Safety
• When you are using the appliances, use only detergents,
softeners and supplements
suitable for washing machines.
• Do not use chemical solvents
on the product. These materials contain an explosion risk.
• Do not operate defective or
damaged products. Unplug
the product (or turn off the
fuse it is connected to), turn
off the water tap and call an
authorised service.
• Do not place sources of ignition (burning candle, cigarettes, etc.) or sources of heat
(irons, furnaces, ovens, etc.)
on top of or near the product.
Do not put inflammable/explosive materials near the
product.
• Do not get on the product.
• Unplug the product and turn
off the tap if you will not be using the product for long periods.
• Detergent/maintenance materials may splash out of the detergent drawer if it is opened
while the machine is working
Contact of the detergent with
your skin and eyes is dangerous.
• Make sure pets do not climb
inside the product. Check inside the product before use.
• Do not force open the locked
loading door. The door will
open once the washing is
completed. If the door does
not open, use the solutions for
“loading door does not open”
error in the Troubleshooting
section.
• Do not wash elements contaminated with gasoline, kerosene, benzene, reducers, alcohol or other inflammable or
explosive materials and industrial chemicals.
• Do not directly use dry cleaning detergent and do not
wash, rinse or spin laundry
contaminated with dry cleaning detergent.
• Do not place your hands into
the rotating drum. Wait until
the drum no longer rotates.
• Do not place your hand or a
metal object under the washing machine.
• If washing laundry at high temperatures, the discharged
washing water would burn
your skin if in contact with
your skin, for ex. when the dis-
EN / 8
charge hose is connected to
the tap. Do not touch the discharge water.
• Take the following precautions
to prevent formation of biofilm
and malodours:
– Make sure the room where
the washing machine is
placed is well ventilated.
– Wipe the door gasket and
loading door glass with a dry
and clean cloth at the end of
the programme.
• The glass of the loading door
will heat up when washing at
high temperatures. Therefore,
do not touch the loading door
glass while washing, especially
children.
1.7 Maintenance and Cleaning Safety
• Do not wash the product with
pressure washers, by spraying
vapour, water or pouring water.
• Do not use sharp or abrasive
tools to clean the product. Do
not use household cleaners,
soap, detergent, gas, gasoline, thinner, alcohol, varnish,
etc. while cleaning.
• Cleaning agents containing
solvents might reek poisonous
fumes( for ex. cleaning solvent.
Do not use cleaning products
containing solvents.
• There may be detergent
residues in the detergent
drawer when you open it for
cleaning.
• Do not dismantle the filter of
the discharge pump while the
product is running.
• The temperature in the machine may rise up to 90ºC.
Clean the filter after the water
in the machine cools down in
order to avoid risk of getting
burnt.
EN / 9
2 Important Instructions for Environment
2.1 Compliance with WEEE Directive
This product complies with EU
WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste electrical
and electronic equipment
(WEEE).
This product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Do not dispose of the waste product
with normal domestic and other wastes at
the end of its service life. Take it to the collection center for the recycling of electrical
and electronic equipment. Please consult
your local authorities to learn about these
collection centers.
Compliance with RoHS Directive:
The product you have purchased complies
with EU RoHS Directive (2011/65/EU). It
does not contain harmful and prohibited materials specified in the Directive.
2.2 Package Information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment
Regulations. Do not dispose of the packaging materials together with the domestic
or other wastes. Take them to the packaging
material collection points designated by the
local authorities.
EN / 10
3 Technical Specifications
Supplier’s name or commercial brand Beko
Model name
Nominal Capacity (kg) 8
Maximum spin speed (cycle/min) 1400
Built-In No
Height (cm) 84
Width (cm) 60
Depth (cm) 55
Single Water inlet / Double Water inlet + / -
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 1320
The model information as stored in the product database
can be reached by entering following website and searching for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
The consumption values apply when wireless network connection is turned off.
B3W5841IG
7175746100
EN / 11
4 Installation
Please read the “Safety Instructions”
section first!
Your washing machine automatically
detects the amount of laundry
placed inside when selecting a program.
While installing the product, before
the first use, calibration should be
done to ensure that the laundry
amount is detected in the most accurate way.
To do this, select the Drum Cleaning* program and cancel the spin
function. Start the program without
laundry. Wait for the program to finish, which will take about 15
minutes.
*The program name may vary depending on the model. For the appropriate program selection, review
the program descriptions section.
• Please contact the nearest Authorised
Service for the installation of the appliance.
• Make sure that the installation and elec-
trical connections of the product are performed by authorised service agent. Manufacturer shall not be held responsible for
damages caused by operations performed
by unauthorised persons.
• Preparation of the location and electrical,
tap water and waste water installations at
the place of installation is under customer's responsibility.
• Make sure that the water inlet and dis-
charge hoses as well as the power cable
are not folded, pinched or crushed while
pushing the product into its place after installation or cleaning procedures.
• Prior to installation, visually check if the
product has any defects on it. Do not have
the product installed if it is damaged.
Damaged products cause risks for your
safety.
4.1 Appropriate Installation Location
• Place the product on a hard and level
floor. Do not place it onto a carpet with
high pile or other similar surfaces. Inappropriate floor may cause problems of noise
and vibration
• Total weight of the washing machine and
the dryer -with full load- when they are
placed on top of each other reaches to
approx. 180 kilograms. Place the product
on a solid and flat floor that has sufficient
load carrying capacity.
• Do not place the product on the power
cable.
• Do not install the product at places where
temperature may fall below 0 ºC. Freezing
might damage your product.
• Leave a minimum space of 1 cm between
the product and the furniture.
• If you will install the product on a surface
with steps, never place it close to the
edge.
• Do not place the product on any platform.
• Do not place heat sources such as
cooker, irons, ovens, heater etc. on the
appliance and do not use them on the
product.
4.2 Assembly of Bottom Panel Covers
• In order to increase the sound comfort of
the product, attach cover A after removing
the package foam.
Cover A
EN / 12
Tilt the machine back slightly. Rest the tabs
of Cover A against the lower panel. Complete the assembly by rotating the cover.
• Cover B and the Cap are optional. If available, attach cover B and the Cap.
Cover B
Rest the tabs of Cover B against the lower
panel. Complete the assembly by rotating
the cover.
Cap
Insert the cap by pushing it with your finger.
4.3 Removing Transportation
Safety Bolts
a. Loosen all transportation safety bolts with
an appropriate wrench until they turn
freely.
b. Bend the inner part by pressing it at the
grip areas and pull the part out.
c. Attach the plastic covers supplied in the
User Manual bag into the holes on the
rear panel.
NOTICE
Remove the transportation safety
bolts before operating the product.
Otherwise, the product will get damaged.
NOTICE
Keep the transportation safety bolts
in a safe place to reuse when the
product needs to be moved again in
the future.
Install the transportation safety bolts
in reverse order of the disassembly
procedure.
Never move the product without the
transportation safety bolts properly
fixed in place.
4.4 Connecting to Water Supply
NOTICE
Models with a single water inlet shall
not be connected to the hot water
tap. In such a case the laundry will
get damaged or the product will
switch to protection mode and will
not operate.
Do not use old or used water inlet
hoses on a new product. It may
cause water leakage from your machine and stain your laundry.
a. Tighten all hose nuts by hand. Never use
a tool when tightening the nuts.
b. Open the taps completely after making
the hose connection to check for water
leaks at the connection points. If any leak
occurs, turn off the tap and remove the
nut. Check the gasket and tighten the nut
carefully again. In order to prevent the
water leaks and resultant damages, keep
the taps closed when you do not use the
product.
EN / 13
4.5 Connecting the Drain Hose to the Drain
a. Attach the end of the drain hose directly
to waste water drain, washbasin or
bathtub.
Your house will be flooded if the water draining hose is dislocated during
water draining. There is also a risk of
burning due to the high washing
temperatures. In order to prevent
such situations and make sure that
the product performs water intake
and drain processes without any
problem, fix the drain hose securely.
b. Connect the drain hose to a minimum
height of 40 cm and a maximum height of
100 cm.
c. Installing the water draining hose at
ground level or close to the floor (40 cm
below) and then raising it makes water
discharge difficult and the laundry may
come out extremely wet. Thus, follow the
heights provided in the figure.
e. The end of the hose should not be bent,
it should not be stepped on and the hose
must not be pinched between the drain
and the product. Otherwise, water discharge issues may emerge.
f. If the length of the hose is too short, use
it by adding an original extension hose.
The overall length of the hose shall not be
longer than 3.2 m. To prevent water
leaks, always secure the connection
between the extension hose and the
draining hose of the product with a suitable clamp so that it does not come off
and cause leaks.
4.6 Adjusting the Stands
NOTICE
In order to ensure that the product
operates more silently and vibrationfree, it must stand level and balanced on its feet. Ensure that the
product is balanced by adjusting the
feet. Otherwise, the product may
move from its place and cause
crushing, noise and vibration problems.
To avoid damaging the lock nuts, do
not use any tools to loosen the nuts.
a. Loosen the lock nuts on the feet by hand.
b. Adjust the feet until the product stands
level and balanced.
c. Tighten all lock nuts again by hand.
d. To prevent the waste water to go back
into the product again and to ensure easy
drainage, do not immerse the end of the
hose into the waste water or do not insert
it into the drain for more than 15 cm. If it
is too long, cut it short.
4.7 Electrical Connection
Connect the product to a grounded outlet
protected by a 13 A fuse. Our company shall
not be responsible for the damages that
shall be incurred due to using the product
without grounding according to local regulations.
EN / 14
• Connection must comply with national
regulations.
• The electrical connection cable infrastructure of the product must be adequate and
suitable for product requirements. It is recommended to use a Ground Fault Circuit
Breaker (GFCI).
• Power cable plug must be within easy
reach after installation.
• If the current supply to the fuse or breaker
in the house is less than 13 Amps, have a
qualified electrician install a 13 amp supply.
• The voltage specified in the "Technical
specifications" section must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs. Overheating and
burning may occur due to the connecting
cable.
Damaged power cables should be
replaced by the authorised service in
order to prevent possible danger.
Important
Fitting a different plug:
As the colours of the wires in the mains lead
of this appliance may not correspond with
the coloured markings identifying the terminals on your plug, proceed as follows:
a. Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or coloured green and yellow or green.
b. Connect the blue (neutral) wire to the ter-
minal in the plug marked ‘N’ or coloured
black.
c. Connect the brown (live) wire to the ter-
minal in the plug marked ‘L’ or coloured
red.
With the alternative plugs a 13 A fuse must
be fitted either in the plug or adaptor or in
the main fuse box. If in doubt contact a qualified electrician.
4.8 Start Up
Before starting to use the product make sure
that the preparations described in section
“Environmental instructions” and “Installation”. To prepare the product for washing
laundry, perform first operation in Drum
Cleaning programme. If this programme is
not available in your product, apply the
method which is described in section
"Cleaning the loading door and the drum".
Some water has remained in the
product due to the quality control
processes in the production. It is not
harmful for the product.
5 Preparation
Please read the “Safety Instructions”
section first
5.1 Sorting the Laundry
• Sort laundry according to type of fabric,
colour, and degree of soiling and allowable
water temperature.
• Always observe the instructions given on
the garment care labels.
EN / 15
Loading...