Dear Customer,
We hope that your product, which has been produced in modern plants and checked under the most
meticulous quality control procedures, will provide you with effective service.
For this, we recommend you to carefully read the entire manual of your product before using it and keep
it at hand for future references.
The user manual will help you use the product in a fast and safe way.
• Read the manual before installing and operating your product.
• Follow the instructions, especially those for safety.
• Keep the manual in an easily accessible place as you may need it later.
• Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
Important information or useful usage
C
tips.
Warning against dangerous conditions
for life and property.
A
B
Warning against electric voltage.
Packaging materials of the product are
manufactured from recyclable materials in accordance with our National
Environment Regulations.
1 Important instructions for safety and
environment 3
1 Important instructions for safety and environment
• Do not connect your appliance to the electricity
supply until all packing and transit protectors
have been removed.
• If transported horizontally leave to stand upright
for at least 4 hours before switching on to allow
compressor oil to settle
• If you are discarding an old refrigerator with a
lock or latch fitted to the door, disable the lock/
latch, ensure that it is left in a safe condition to
prevent the entrapment of young children.
• This fridge/freezer must only be used for its
intended purpose i.e the storing and freezing of
edible foodstuff.
• Do not dispose of the appliance on a fire.
At BEKO, the care and protection of our
environment is an ongoing commitment. This
appliance which is among the latest range
introduced is particularly environment friendly.
Your appliance contains non CFC / HFC natural
substances in the cooling system (Called R600a)
and in the insulation (Called cyclopentane) which
are potentially flammable if exposed to fire.
Therefore, take care not to damage, the cooling
circuit / pipes of the appliance in transportation
and in use. In case of damage do not expose
the appliance to fire or potential ignition source
and immediately ventilate the room where the
appliance is situated.
• We suggest you contact your local authority for
disposal information and facilities available.
• See Installation Instructions on page 8 for
information on suitable location.
• To obtain the best possible performance and
trouble free operation from your appliance
it is very important to carefully read these
instructions.
• On delivery, check to make sure that the product
is not damaged and that all the parts and
accessories are in perfect condition.
• Ensure that the plug remains readily accessible.
Do not use multiple adapter or extension cable.
• Failure to observe these instructions may
invalidate your right to free service during the
guarantee period.
Refrigerator / User Manual
• Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
• Do not use mechanical devices or other means
to accelerate the defrosting process, other than
those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the
food storage compartments of the appliance,
unless they are of the type recommended by the
manufacturer.
• We suggest you keep these instructions in a
safe place for easy reference.
• This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• Children should be supervised to ensure that
they do not play with the appliance.
Electrical requirements
Before you insert the plug into the wall socket
make sure that the voltage and the frequency
shown on the rating plate inside the appliance
corresponds to your electricity supply.
Rating label is on the left hand side of fridge inner
liner.
3 / 27 EN
Important instructions for safety and environment
We recommend that this appliance be connected
to the mains supply via a suitable switched and
fused socket. The appliance must be positioned so
that the plug is accessible.
Should the mains lead of the appliance become
damaged or should it need Replacing at any time,
it must be replaced by a special purpose made
mains lead which can only be obtained from a
BEKO authorised service agent.
Warning! This appliance must be
earthed
If the fitted moulded plug is not suitable for your
socket, then the plug should be cut off and an
appropriate plug fitted. Destroy the old plug which
is cut off as a plug with bared cord could cause a
shock hazard if inserted into a socket elsewhere in
the house.
The moulded plug on this appliance incorporates
a 13 A fuse. Should the fuse need to be replaced
an ASTABEAB approved BS 1362 fuse of the same
rating must be used. Do not forget to refit the fuse
cover. In the event of losing the fuse cover the plug
must not be used until a replacement fuse cover
has been fitted.
Colour of the replacement fuse cover must be the
same colour as that visible on the pin face of the
plug. Fuse covers are available from any good
electrical store.
Important! Fitting A Different Plug
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in your
plug proceed as follows: (See diagram).
1. Connect the green-yellow or green (Earth) wire
to the terminal in the plug marked ‘E’ or with
the symbol or coloured green and yellow or
green.
2. Connect the blue (Neutral) wire to the terminal in
the plug marked ‘N’ or coloured black.
3. Connect the brown (Live) wire to the terminal in
the plug marked ‘L’ or coloured red.
With alternative plugs a 13 A fuse must be fitted
either in the plug or adaptor or in the main fuse
box. If in doubt contact a qualified electrician.
GREEN &
YELLOW
GREEN
N
BLUE
OR
BLACK
OR
6mm.
L
32mm.
BROWN
OR
RED
22mm.
6mm.
CORD GRIP
12mm.
6mm.
FUSE
FITTED WITH
CARTRIDGE FUSE
FIT BS 1362 REPLACEMENT
BS 1362 13A FUSE ALWAYS
4 / 27 EN
Refrigerator / User Manual
Important instructions for safety and environment
Energy saving tips
1. Ensure your appliance is installed in a well
ventilated area.
2. Ensure the time between buying chilled/frozen
food and placing them in your appliance is
kept at minimum, particularly in summer. We
recommend you use a cool bag or a special
carrier bag to carry perishable food.
3. Do not leave the door (s) of your appliance open
longer than necessary and ensure they are
closed properly after each opening.
4. Defrost frozen food in the fridge compartment,
so that frozen food acts as an ice pack to assist
cooling in the fridge.
5. Energy consumption of this appliance is
measured while freezer compartment is loaded
without use of top shelf lid and the drawers
except the bottom drawer. It is advised that
freezer compartment is loaded without use of
drawers except the bottom drawer in order to
achieve maximum loading capacity.
Compliance with rohs directive:
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
Package information
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose of the packaging
materials together with the domestic or other
wastes. Take them to the packaging material
collection points designated by the local
authorities.
Compliance with WEEE Directive and
Disposing of the Waste Product:
This product complies with EU WEEE
Directive (2012/19/EU). This product
bears a classification symbol for
waste electrical and electronic
equipment (WEEE).This product has
been manufactured with high quality
parts and materials which can be
reused and are suitable for recycling. Do not
dispose of the waste product with normal domestic
and other wastes at the end of its service life. Take
it to the collection center for the recycling of
electrical and electronic equipment. Please consult
your local authorities to learn about these
collection centers.
Refrigerator / User Manual
5 / 27 EN
2 Your refrigerator
Congratulations on your choice of a BEKO quality Appliance which has been
designed to give you service for many years.
13
*14
12
10
2
3
5
8
9
*4
*6
*7
1
11
1- Freezer compartment
2- Fridge compartment
3- Fan
4- Butter-cheese compartments
5- Glass shelves
6- Fridge compartment door racks and egg
compartment
7- Water dispenser tank
*Optional: Figures in this user manual are schematic and may not match the product exactly. If
the relevant parts are not available in the product you purchased, it applies to other models.
not be held liable for damages that may arise from
procedures carried out by unauthorised persons.
To make the product ready for use, make sure
that the electricity installation is appropriate before
calling the Authorised Service Agent. If not, call
a qualified electrician to have any necessary
arrangements carried out.
Preparation of the location and electrical
installation at the place of installation is
C
B
B
A
C
under customer's responsibility.
Product must not be plugged in during
installation. Otherwise, there is the risk of
death or serious injury!
WARNING: Manufacturer shall not
be held liable for damages that may
arise from procedures carried out by
unauthorised persons.
WARNING: Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
Make sure that the power cable is not
pinched or crushed while pushing the
product into its place after installation or
cleaning procedures.
3.1. Appropriate
installation location
WARNING: If the door of the room where
the product will be placed is too small for
the product to pass, then the product's
A
• Choose a place at where you would use the
product comfortably.
• Install the product at least 30 cm away from
heat sources such as hobs, ovens, heaters
and stoves.Product must not be subjected to
direct sun light and kept in humid places after
installation.
• Appropriate air ventilation must be provided
around your product in order to achieve an
efficient operation. If the product is to be placed
in a recess in the wall, pay attention to leave at
least 5 cm distance with the ceiling and side
walls.
• Do not place the product on the materials such
as rugs or carpets.
• Place the product on an even floor surface to
prevent jolts.
• Do not install the product in places where the
temperature falls below 5°C.
C
3.2. Installing the
plastic wedges
Plastic wedges are used to create the distance
for the air circulation between the product and
the rear wall. Insert the 2 plastic wedges onto the
rear ventilation cover as illustrated in the figure.
To install the wedges, remove the screws on the
product and use the screws given in the same
pouch with the wedges.
doors can removed and the product turned
aside to pass it through.
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
Refrigerator / User Manual
7 / 27 EN
Installation
• The specified voltage must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
WARNING: Damaged power cable must
B
B
be replaced by the Authorised Service
Agents.
WARNING: If the product has a failure,
it should not be operated unless it is
repaired by the Authorised Service
Agent! There is the risk of electric shock!
3.4. Adjusting the feet
If the product stands unbalanced after installation
adjust the feet. Taking help from someone to
slightly lift the refrigerator will facilitate this
process.
3.3. Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values in
the rating plate. Our company shall not be liable
for any damages that will arise when the product
is used without grounding in accordance with the
local regulations.
• Electrical connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• The voltage and allowed fuse or breaker
protection are specified in the Rating Plate
which is affixed to interior of the product. If
the current value of the fuse or breaker in the
house does not comply with the value in the
rating plate, have a qualified electrician install a
suitable fuse.
WARNING: First unplug the product.
Product must not be plugged in when
B
Turn the front feet to balance the product. The
corner where the foot exists is lowered when you
turn in the direction of arrow and raised when you
turn it in the opposite direction.
adjusting the feet. There is the risk of
electric shock!
3.5. Illumination lamp
Do not attempt to repair yourself but call the
Authorised Service Agent if the LED illumination
lamps do not go on or are out of order.
8 / 27 EN
Refrigerator / User Manual
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.