Beiter TW User Manual

Update 01/2004

The TWISTER

Features of the BEITER TWISTER:

The Beiter Twister is a tool, to easier serve a serving with the Beiter
Winder. Developed together with the Beiter Winder, the Beiter Twister
is available as an option.
It is a device, which helps the archer in different ways, for example:
On one side it stabilises the serving jig - your Winder! - , while serving.
(pic.1)
Than it can be engaged and used as to serve the serving faster, tighter
and more accurate. (pic.2)
A third option is that you can open the serving - without losing tension

-, if you served too much or in the wrong way. (pic.3)

The Beiter Twister can be ordered as a single spare part (and used an
all Beiter Winder already on the market), but it can be also ordered in
combination with the Beiter Winder. In any case instructions are
enclosed!

pic. 1

pic. 2

Instructions:

Start to serve as usual.

Install the Beiter Twister on the string and turn the black cap so, that
the Beiter Twister can not leave the string (pic.4).

Fix the Twister on the Winder, klicking it in on the opposite side of the
slot - there are two guiding “noses” on the correct side (pic.5).

You can engage and dis-engage the Twister from the Winder.

Code-numbers:
WIETWISTERBL -> Winder, Twister, Blue
WIETWSITERGRBL -> Winder, Twister for Winder Profi

pic. 3

pic. 4

pic. 5

Werner Beiter
Daimlerstr. 18
DE-78083 Dauchingen

www.WernerBeiter.com

Tel. [phone]

Fax [phone]

email: [e-mail]