Beiter SCOPE 029-DLX User Manual

- SCOPE Ø29 - DLX

Update 10/01

D

C

B

A

Lenses:

Convex/concave ZEISS-Lenses, extra-coated, Ø29mm..
Power: + 0.25,+ 0.50, + 0.75, + 1.00, +1.25

WEATHERSHIELD

Colours: Black, Red, Light

THREADRINGS

Colours :Black, Clear, Red, Green

- without Crosshair

- Crosshair, Hole-Ø1,5mm

- Crosshair, Hole-Ø2,5mm

FLUORPINS

Colours: Red, Green Orange, Blue, Black

- for Hole-Ø1,5mm/sightn1,5mm

- for Hole-Ø2,5mm/sight n2,5mm
Colours: Red, Green Orange

- for Hole-Ø1,5mm/sight n2,5mm

- for Hole-Ø2,5mm/sight n3,5mm

Basic Unit:

A: 1 Scope-Body

The Basic Unit has to be combined with
one or more of the following aiming kits.
Colours: Red, Green, Orange, Black.

B: 1 ZEISS - Lens Ø29mm
C: 1 O-Ring for lens

1 O-Ring 4x2 or 5x2

D: 1 Clear Threadring

Options:

Right- or Lefthanded

Aiming Kit I:

- 1 support for level Ø10mm with pin

- 1 support for level Ø10mm

- 1 holder for support

- 1 ring ea. Ø4mm, Ø6mm, Ø9mm

- 1 square ea. 6mm and 9mm

- 1 level Ø10mm

Threads: #10-32, #8-32
Colours: Black, Clear,

Red, Green

Aiming Kit II:

- 1 shield for level

- 1 shield for level with pin

- 1 ring ea. Ø4mm, Ø6mm, Ø9mm

- 1 square ea. 6mm and 9mm

- 1 standard level in the desired
combination

ACCESSORIES:

LEVEL Ø10MM SYSTEM

The Level Ø10mm system consists out of: 1 support with or
without pin, 1 Holder for support and 1 level Ø10mm
Colours: Black, Red, Green, Orange, Clear

Mounting Advice: mount the desired sight insert on the
support. Clip the level into the support and insert it (pins
backwards) in the device of the scope body.
Now clip in the holder for support.

Effect: the level will turn into the colour of the used
support/holder combination!

LEVEL IN HOLDER

- green level in clear holder

- red level in clear holder

- green level in black holder

- red level in black holder

MOUNTING ADVICE

ATTENTION: The Scope must be fixed tight to
the sight! Use following Beiter Spacers:

- #8-32 (black) 2mm (a) and 5mm (b)

- #10-32 (grey) 2mm (a) and 5mm (b)

- O-Ring 4x2 for #8-32 (c)

- O-Ring 5x2 for #10-32 (c)

c

a

b

Werner Beiter - Daimlerstraße 18 - D-78083 Dauchingen Tel. [phone] Fax[phone]

www.wernerbeiter.com MADE IN GERMANY e-mail: [e-mail]

SHIELD for LEVEL

Without Pin (d), with or without pin,
Colours: Black, Red, Green, Orange, Clear

MOUNTING ADVICE

To install the shield, first push out the level,
than insert the shield (pins backwards) in the
device of the scope body. Reinstall and clip
in the level.

SIGHT INSERTS

Rings and Square in following colours:

Black, Red, Green, Orange

Rings: 4mm (f), 6mm (i) or 9mm (g)
Square: 6mm (j) or 9mm (h)
Use the 4mm Ring only on the shield for

level without pin!

Using sight inserts, the cross in the thread

ring should be cut out with small pliers.

d

e

g

g

ii

f

h

j