Beiter SCOPE 029 User Manual

- SCOPE Ø29

Update 09/01

D

F

C

B

A

E

LENSES:

Convex/concave ZEISS-Lenses, extra-coated, 29mm diameter.
Power: + 0.25,+ 0.50, + 0.75, + 1.00, +1.25

ACCESSORIES:

WEATHERSHIELD

Colours: Black, Red, Light

THREADRINGS

Colours :Black, Clear, Red, Green

- no Crosshair

- Crosshair, Hole-Ø1,5mm

- Crosshair, Hole-Ø2,5mm

FLUORPINS

Colours: Red, Green Orange, Blue, Black

- for Hole-Ø1,5mm/sightn1,5mm

- for Hole-Ø2,5mm/sight n2,5mm
Colours: Red, Green Orange

- for Hole-Ø1,5mm/sight n2,5mm

- for Hole-Ø2,5mm/sight n3,5mm

LEVEL IN HOLDER

- green level in clear holder

- red level in clear holder

- green level in black holder

- red level in black holder

BASIC EQUIPMENT:

A: 1 Scope-Body
B: 1 ZEISS - Lens Ø29mm
C: 1 O-Ring for lens

1 O-Ring 4x2 or 5x2
D: 1 ClearThreadring, Hole-Ø1,5mm
E: 1 Level in holder

1 Scope Tool
F: 1 Fluor Pin Red for

Hole-Ø1,5mm/sight-n1,5mm

OPTIONS:

Righthanded or Lefthanded
Threads: #8-32 or #10-32
Colours: Black, Clear, Red, Green

SHIELD for LEVEL

Without Pin (d), with or without break-through,
Colours: Black, Red, Green, Orange, Clear
With Pin (e), with or without break-through,
Colours: Black, Red, Green, Orange, Clear

MOUNTING ADVICE

To install the shield, first push out the level,
than insert the shield (pins backwards) in the
device of the scope body. Reinstall and clip in
the level.

e

g

i

h

f

d

j

MOUNTING ADVICE

ATTENTION: The Scope must be fixed tight to
the sight! Use following Beiter Spacers:

- #8-32 (black) 2mm (a) and 5mm (b)

- #10-32 (grey) 2mm (a) and 5mm (b)

- O-Ring 4x2 for #8-32 (c)

- O-Ring 5x2 for #10-32 (c)

Werner Beiter Technische Kunststoffteile - Daimlerstraße 18 - D-78083 Dauchingen Tel. [phone] Fax[phone]

www.wernerbeiter.com MADE IN GERMANY e-mail: [e-mail]

c

a

b

Rings and Square in following colours:

Black, Red, Green, Orange

Rings: 4mm (f), 6mm (i) or 9mm (g)
Square: 6mm (j) or 9mm (h)
Use the 4mm Ring only on the shield for

level without pin!

Using sight inserts, the cross in the thread
ring should be cut out with small pliers.

SIGHT INSERTS