BEI Sensors SA100 User Manual

SA100 Linear Digital Display

Construction: 1/16” sheet metal

Dimensions: Height: 2.835”, Width: 5.878”,

Depth: 2.756”, Weight: 1.07 lbs

Operating Voltage: 12-27 VDC ±10%
(power supply 60012-003 included)

Maximum Power Consumption: 6 watts

Maximum Data Rate: 2MHz

Operating Temperature: 0 to 45°C

Storage Temperature: -20 to 60°C

Inputs: Two channels in quadrature. Differential

or single ended (user selectable)

Environment: Indoor use, IP20

(subject to change without notice)

Tel: [phone] | Fax: [phone] | 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beiied.com

Specification No. 924-02102-001 Rev.1-07

This versatile 7-digit display reads out in inches or millimeters. Resolutions from 0.1

micron to 1 mm or 5 micro inches to 0.01 inch are selectable via the front panel. The

SA100 accepts a 5VDC standard differential quadrature signal from either linear or

rotary incremental encoders. Incremental and absolute operating modes are avail-

able. The SA100 also features an auxiliary reference input, allowing integration of

an independent reference marker from a remote switch. The SA100 comes with its

own 12VDC power supply which operates on 115 VAC line voltage. A Setup Mode

allows front panel programming of

• display resolution

• axis resolution

• count direction

• signal error detection

• referencing

• error compensation

• scale factors

BEI P/N 924-60012-004

An optional installation kit is available for the
SA100. The kit includes all necessary hardware
to mount the SA100 into a panel or to attach an
adjustable support for desktop use.

BEI P/N: 31326-001, $25.00

Encoder Input (9-way D)

Pin No. Function

1 N/C (or 0V)
2 Channel A
3 Channel /A
4 Channel B
5 Channel /B
60V
7 +5V
8 Channel Z
9 Channel /Z

Technical Specifications

Mounting Kit

(Optional)

Panel
Mounting

Encoder

Input

(9 pin

D type

connector)

Encoder- Type
selector switches

Cable
retaining
clamp

2.5mm power inlet
(12-27 VDC ± 10%)

Auxiliary Input

Differential

Encoder

Single Ended

Encoder

ON

ON

Desktop or Support
Mounting Arm