BEI Sensors Programmable Hall Device User Manual

BEI Sensors

PHD
Programmable Hall Device

Product Specifications

Box Dimensions: 6.30 x 4.92 x 2.03”

Power Requirements: 120V AC
PHD Package includes: PHD programming

box, AC adapter, North American power cord,
USB computer interface cable, USB flash
drive(contains PHD programming software,
user manual, and data sheet).

BEI Sensors introduces the Programmable Hall Device (PHD), an easy way to
take control of customizing BEI Hall effect sensor output. This compact system
interfaces with your PC to BEI Hall effect sensors and provides users with the
ability to create output functions that meet specific requirements. The system
includes proprietary PHD software (compatible with Windows XP, 7 or Vista),
the PHD programming unit, power cord and a USB computer interface cable.
Cables to interface the PHD to specific sensor connectors are sold separately. A
positions fixture is recommended if the sensors are not programmed after
installation in the final assembly

After installing the PHD software, connect the PHD programmer to the sensor
and PC and you’re ready to program. The PHD software makes programming
simple by providing users an easy to understand screen where programming
routines can be created, stored and recalled for later use. The PHD software
also offers a real-time graphical representation of the sensor output allowing
verification of the sensor’s functionality after programming. The PHD can be
used to program both the analog and PWM output versions of BEI
programmable Hall effect sensors. BEI Sensors can also work with you to
provide adaptations to the PHD system that you may need.

Product Features

• For use on programmable BEI Hall Effect Sensor Series
9360, 8360 and 9960

• Sensors can be programmed after installation into an
assembly reducing errors from mechanical tolerances

• Multi-point programming increases sensor accuracy

• Ability to program binary/switch output

• Independent programming of outputs in dual output sensors

• Program electrical angle anywhere within the mechanical

rotation of the sensor

• Set high and low clipping points on output

• Create, name and store program routines for later use

• Ability to reprogram sensor or lock the sensor to prevent

accidental reprogramming

• Real-time verification of programmed output

Program Interface

System Requirements

Operating System: XP, Vista, or Windows 7
(32 or 64 bit)
Computer Memory: 512 MB
Screen Resolution: 1024x768 pixels
AC Power 120/240 VAC, 50/60 Hz

Home Screen

View Output
Screen

Ordering Information

PHD System Part Number: PHD

Tel: [phone] | Fax: [phone] | 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beisensors.com

Specification No.: 02134 Rev. 5/13

BEI Hall Effect Sensor to PHD

Sensor Interconnect Cables

BEI programmable

sensor

Sensor Termination

Sensor To PHD

Interconnect Cable

BEI Part Number

9960

Flying leads, single output (SL)

14-PHD-88-1

9960

Flying leads, dual output (DL)

14-PHD-88-1

9960

Tyco Amp, single output (SA)

14-PHD-88-5

9960

Tyco Amp, dual output (DA)

14-PHD-88-4

9960

Deutsch, single output (SD)

14-PHD-88-8

9960

Deutsch, dual output (DD)

14-PHD-88-7

9960

Metripack, single output (SM)

14-PHD-88-3

9960

Metripack, dual output (DM)

14-PHD-88-2

9960

Weatherpack, single output (SW)

14-PHD-88-6

8360

Tyco Amp, dual output

14-PHD-88-9

9360

Metripack, dual output

14-PHD-88-2

Country Specific Power Cords

Country

Plug Type

BEI Part Number

Belgium, Denmark,
Finland, France,
Germany, Greece,
Korea, Netherlands,
Russia, Spain

CEE7/7

14-252-88-001

Brazil

NBR 14136

14-252-88-008

China

CPCS-CCC

14-252-88-004

India

IA6A3 (aka IS
1293 and
BS546)

14-252-88-005
Israel

SI-32

14-525-88-002

Italy

CEI 23-16

14-252-88-003
Swiss

ASEV 1011

14-252-88-007

Hong Kong,
Singapore, UK

BS1363

14-252-88-006

PHD
Programmable Hall Device

BEI Sensors

System Set Up

Cable Accessories

For complete hardware and software set up and use, see the PHD User Guide (BEI Specification number 02135)

Note: Diagram not to scale

Tel: [phone] | Fax: [phone] | 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beisensors.com

Specification No.: 02134 Rev. 5/13