Beijing Noitom Technology HI5 LG 01, HI5 RG 01 User Manual

Noitom Hi5 VR Glove

User Guidelines

Ver. 1.3

Version Number

Version Date

Version Reason

1.0

2017.4

Initial version

1.1

2017.09.12

1. RF performance revised;

2. Mounting optical tracking
device revised;

3. Wearing glove revised;

4. Calibration motions and steps
revised.

1.2

2017.11.22

1. RF performance for multiple
user revised;

2. Vibration meaning changed;

3. Battery life extended.

1.3

2018.2.1

1. Add FCC statement

Version Control

Contents

1. Introduction .................................................................................................. 1

2. Hardware Parts ............................................................................................ 2

2.1 Components ........................................................................................................... 2

2.2 Interaction Interfaces .............................................................................................. 3

2.3 Features.................................................................................................................. 4

2.4 Radio Frequency (RF) ............................................................................................ 4

2.5 Usages.................................................................................................................... 5

2.5.1 Basic Operation Steps ................................................................................... 5

2.5.2 Pairing Gloves ................................................................................................ 6

2.5.3 Demagnetization ............................................................................................ 7

3. Mechanical Parts ......................................................................................... 9

3.1 Mounting Optical Tracking Devices ........................................................................ 9

3.2 Wearing Gloves .................................................................................................... 12

4. SDK ........................................................................................................... 14

5. Calibration Instructions .............................................................................. 15

5.1 Notice .................................................................................................................... 15

5.2 Calibration Steps .................................................................................................. 15

Hi5 VR Glove

Developer Guidelines

NOITOM corporation

Dec.2017 V1.2

sample (Unity/Unreal)

Turn on Hi5 gloves, and

they’ll connect to dongle

automatically

Put on HMD

Demagnetization

Calibration

sample instruction)

1. Introduction

This document describes the development guidelines for content developers. It contains
information on how to use the Noitom Hi5 VR Glove to enable motion capture tracking of
the user’s hands and fingers.

Notice:

1. Noitom Hi5 is provided as a pair. You may use them with both hands or with just one
hand and one Glove.

2. It’s needed to use Noitom Hi5 together with optical tracking devices in order to gain
the absolute position of your hands and forearms in a tracked area and do calibration
correctly.

3. Noitom Hi5 Glove can be used on win7/8/10.

4. Currently both VIVE tracker and controller are supported as optical tracking devices
for Hi5 and mounted on Hi5 gloves.

5. You are suggested NOT to hold VIVE controller or any other magnetic or ferrous
objects in hand when wearing Hi5 glove, since it will influence the motion capture
performance.

Basic using steps (for reference):

Set VIVE ready

Open Hi5 calibration

Mount VIVE trackers

onto Hi5 gloves

Turn on trackers, and

pair them to steam

Plug Hi5 dongle into

HMD/PC

Put on Hi5 gloves

Hi5 VR Glove Developer Guidelines 1

(follow Hi5 calibration

Hi5 VR Glove

Developer Guidelines

NOITOM corporation

Dec.2017 V1.2

( Figure 2.1-1 )

( Figure 2.1-2 )

Sensors

(bolt and stabilizing pin)

AA battery cover

Button

Indicator light

USB connector

Indicator light

Button

2. Hardware Parts

2.1 Components

Noitom Hi5 comes packaged with 1 pair of Hi5 Gloves (“Glove”) and 1 USB 2.0
transceiver (“Dongle”)：

Mounting surface

Hi5 VR Glove Developer Guidelines 2

Hi5 VR Glove

Developer Guidelines

NOITOM corporation

Dec.2017 V1.2

Function

Operation and Indication

On Glove/Dongle

Turning on the Glove

Press the button when the Glove is
powered off (click)

Glove

Turning off the Glove

Press and hold the button for 5
seconds (release after the indicator
light turns off)

Glove

Entering pairing mode

Press and hold the buttons for 3
seconds (release when the indicator
lights turn on to a solid state)

Glove & Dongle
Manually switching working
frequency

Short press the button (click)

Dongle
Triggering button event

Short press the button (click)

Glove

Meaning

Indicator Light State

On Glove/Dongle

Powered off

Turned off

Glove

Standby

Breathing

Glove & Dongle

Pairing mode

1Hz flashing (slowly flashing)

Glove & Dongle

Working mode

20Hz flashing (rapid flashing)

Glove & Dongle

The current ambient
environment has magnetic
interference

Solid state turned on (in working
mode)

Glove
Error 01
(Self-test error)

Solid state turned on (right after
power on)

Glove & Dongle

Error 02
(enter Boot mode)

3s off, 0.1s on

Glove & Dongle

2.2 Interaction Interfaces

There is one button and one indicator light for each Glove and each Dongle. The
interaction lookup table is as follows:

Button Functions:

Indicator Light States:

( Table 2.2-1 )

Notice：The indicator light on the Gloves will turn RED when the battery power is low.

Hi5 VR Glove Developer Guidelines 3

( Table 2.2-2 )

Hi5 VR Glove

Developer Guidelines

NOITOM corporation

Dec.2017 V1.2

Meaning

States

On Glove/Dongle

Glove power on

Vibrate for 0.5s

Glove

( Figure 2.4-1: Restricted Area of Antenna )

Vibration States:

( Table 2.2-2 )

2.3 Features

 9-DOF IMU for 5 fingers and the back of hand
 Vibration feedback for each Glove
 Supply voltage range of 1.0-1.5VDC with one AA battery for each Glove
 Supply voltage range of 5±0.25VDC for Dongle
 7 hours of working time with 2100mAh Alkaline battery
 Latency less than 5 ms (From motion to SDK, under clean RF condition)
 Output date rate up to 180Hz
 RF working area: 5m×5m (open area without interference)
 automatic channel-switching to avoid RF interference

2.4 Radio Frequency (RF)

1. Working frequency range: 2400MHz~2483.5MHz

2. Restricted Area of Antenna

The figure below illustrates the “keep out” area where only nonmetallic parts of the accessory
should be inside (spherical radius=20mm and the center is antenna feed point).

Hi5 VR Glove Developer Guidelines 4