1. Switch on the Power
2. Internet connecting
It needs to exit from Onsign App
firstly in order to set up a new
connection via wifi. For doing it,
please plug a mouse into a USB
port, and exit from the Onsign App
by clicking the mouse.
Operate the signage
Power Switch
Wi-Fi
3. Contents playback
Onsign is a thirdparty App for
content playback. It has been
installed in the sigange.
For further inforamtion, please go
to www.onsign.tv
LANor
W3202
Light and intelligent
Digital Signage
Operting Instructions
Product Overview
Warning
LAN
USB1
USB2
SIM card
(Optional)
Power Switch
Power Socket
Antenna
Do not use any kinds of power supply
other than AC 220V, 50/60Hz.
Do not fix the signage in an unstable
place and position, otherwise it may
cause damage dueto falling,
or even cause fire.
Do not place the signage under strong
and direct light, in an environment with
high humidity, overheat or much dust,
in an environment storing or using
flammable and explosive substances,
and an environment withcombustible
or corrosive gases.
Do not use damaged or unfitted
power socket. Please make sure
the plug fits well the power socket.
The plug and power socket should
not adhere to dust and metal
attachment.
The power cord should not be damaged.
Any modification of the power cord is
strictly prohibited. Keep the power cord
away from heat source. Do not pull the
power cord when pulling off the plug.
Too many parallel plugs in one socket
should be prohibited; otherwise it may
cause fire due to excessive power
dissipation.
Keep the signage away from open fire;
otherwise it will cause electric shock
or even fire.
Do not place any water-filled containers
around the signage, to prevent any
dripping or splashing of water which
may cause electric shock or fire.
Pull off the power plug when cleaning
the signage. Use a soft cloth dipped
with water to clean. Do not use
industrial chemicals to wash or clean.
Prevent foreign matter and water from
entering into the machine.
Do not rub with a hard object, knocking
LCD screen, or liquid crystal display
pressed hard twist.
Do not rub or knock the LCD with a hard
object, or press or twist the LCD screen.
In case the LCD breaks and the liquid
spilled onto skin, wash immediately with
water for 15 minutes and consult
your doctor.
Do not touch the plug with wet hands,
otherwise it may cause electric shock.
When it rains heavily, do not use the
signage, especially at the time when
there is thunder and lightning together.
Unplug the power cords and the
antenna plugs promptly,
to prevent lightning strike.
Do not in any way disassemble the
signage, or it may cause electric shock
or fire. All repairs should be managed
by a professional technical staff.
Screen size：
Screen resolution：
Brightness：
Constract ratio：
Dimension：
Weight：
Internet connect：
Specifications
32inch
768x1366
300cd/m2（typical）
800:1
920x440x35(mm)
9.6kg
LAN / Wi-Fi / 3G
(Optional)
Packing List
Signage Smart Panel Power cord Operation manual
Content format:
Picture：jpg、bmp、png、gif
Video： AVI、MPEG2、MPEG4、WMV
Audio： mp3
(Playback with an Android OS multimedia player)
Wall mount(Optional) Foldable floor stand(Optional)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Loading...