Beijing Beebox Technology BSD01WS User Manual

Manual

Installation instructions

Choose the appropriate installation location, and choose one of the following installation methods
according to the site environment.

Method 1 (Direct installation)

1.Select the appropriate mounting location and attach the positioning sticker to the installation
location.

2.Compare the positions of the four fixed holes (1, 2, 3, 4 fixing holes as shown in Figure 1),
opening a hole in the wall (recommended aperture 7mm, depth 35m) , Insert the plastic expansion
rubber plug into the hole to remove the positioning sticker.

3.Connect the reserved cable to the device.

4.

Open the cover (recommended by suction cup or plastic cymbal), screw the four screws (M4*40) into

the expansion plug to secure the device to the wall.

5.Reinstall the cover back into the device.

Method 2 (86 box installation)

1.Install 86 boxes of repairs in 86 boxes.

2.Connect the reserved cable to the device.

3.

Open the cover (recommended by suction cup or plastic cymbal), screw the screws (M4*45) into

the four screw holes (as shown in Figures 2, 5, 6, 7, 8) to ensure that the device is fixed to the 86 box.

4.Reinstall the cover back into the device.

Cover

Dimensions (Unit：mm)

15

275

145 106

Installation method 1

1 2

3

安装贴纸：将该贴纸贴到要安装的位置，根据图标来做打孔，布线等操作。

4

The height line of camera

279-00127-01

Figure 1

Installation method 2

86 boxes of repair

Fixed hole

Positioning sticker

5

6

60mm

7

86box

Figure 2

Figure 3

Rotatable Angle：90°~65°,-35°~35°

8

25°

Alarm button

35° 35°

Power on

Figure 4

Port Description

Specification

Position

H (cm)

150

LAN

Audio

+12VDC

IN

Adapt to height range

W (cm)

50

70

90

Screen rotation

angle

90°
75°
65°
90°
75°
65°
90°
75°
65°

TTL

Recognizable

height L(cm)

126-157
140-170
150-192
112-162
132-188
151-217
102-172
128-202
151-251

BRD-WS-SD1

Support

30-180cm

1:1, 1:N, 1:1/1:N

1:NComparison Time≤0.3second/person

20000

Android 7.0

Professional Wide-angle Dual Camera (Visible Light & Infrared)

8.0inch Touch LCD，800*1280

Support

Support

-10℃ ~ 55℃

5%-95%(Non-condensing)

145*106*275mm

DC 12V 3A

Wi-Fi

Bluetooth

Ethernet

2.4 GHz/5 GHz（5.15GHz-5.25GHz;5.725GHz-5.825GHz），
IEEE 802.11a/g/b/n；IEEE 802.11ac

BT4.1+BLE
Support

RS232*1，USB2.0*1，RS485*1，Audio Jack*1，Wiegand TX*1，
Wiegand RX*1，Relay*1， RJ45*1

Support

WG_D0_O
WG_D1_O
GND
WG_D0_I
WG_D1_I
GND
Relay_NC
Relay_NO
Relay_COM

RS232_TX

RS232_RX

GND

RS485_B

RS485_A

GND

USB

Product Number

Living Security

Recognition Distance

Verification Method

Face Comparison Time

Capacity

OS

Camera

Display

Multi-touch

Tamper alarm

Operating temperature

Relative Humidity

Dimensions

Power Cord Rating

Communication Method

Physical Interface

Power On

Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no

H

L

guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is

w

connected.

—Consult the dealer or an experienced radio/TV technician for help.

© 2018 Beijing Beebox Technology Co.,Ltd. all rights reserved. Printed in China.

317-00486-01