Beijing Beebox Technology BSD01ST User Manual

Manual

Installation instructions

1.Please confirm that the expansion bolt is suitable for the current ground environment.

2.Attach the positioning sticker to the installation location.

3.The four positioning holes on the corresponding sticker are opened at the mounting position

(recommended aperture 10mm, depth 70mm), used to fix expansion bolts and remove positioning stickers.

4.Unscrew the five screws on the bottom plate to remove the bottom plate and fix the four expansion
bolts and the bottom plate to the ground.

5.Place the base and the weight in the position corresponding to the bottom plate, fix the four weight
fixing screws (M4*18) together.

6.Fix the four counterweight cover fixing screws (M4*10) with the weights.

Rotatable Angle：96°~65°

6°

25°

100-240V~/1.5A/50-60Hz

Audio LAN

USB

+

-

Power

Dimensions (Unit：mm)

1270

Counterweight

cover fixing screw

Positioning Sticker

Counterweight cover Counterweight

Counterweight

fixing screw

bottom plate

Base

Bottom plate screw

Expansion bolt

Port Description

Relay_NC

Relay_NO

Relay_COM

100-240V~/1.5A/50-60Hz

Wiegand RS485RS232 RS232Relay

Audio LAN USB

+12VDC IN

+

Power

GND
WG_D1_I
WG_D0_I
GND
WG_D1_O
WG_D0_O

GND
RS232_RX_2
RS232_TX_2

-

GND

RS485_A
RS485_B

GND
RS232_RX_1
RS232_TX_1

305

170

Position

Adapt to height range

Distance from person to

identification terminal W(cm)

50

70

90

Screen rotation

angle

90°

75°

65°

90°

75°

65°

90°

75°

65°

Specification

Product Number

Living Security

Recognition Distance

Verification Method

Face Comparison Time

Capacity

OS

Camera

Display

Operating temperature

Relative Humidity

Dimensions

Power Cord Rating

Communication Method

Physical Interface

Power On

BRD-ST-SD1

Support

30-180cm

1:1, 1:N, 1:1/1:N

1:N Comparison Time≤0.3s/p

20000

Android 7.0

Professional Wide-angle Dual Camera (Visible Light & Infrared)

8.0inch Touch LCD，800*1280

-10℃ ~ 55℃

5%-95%(Non-condensing)

305*170*1270 mm

DC 12V 3A or AC 100-240V~/1.5A/50-60Hz

Wi-Fi

Bluetooth

Ethernet

RS232*2，USB2.0*1，RS485*1，Audio Jack*1，RJ45*1，Wiegand TX*1
，Wiegand RX*1，Relay*1

Support

Recognizable

height L(cm)

126-157

140-170

150-192

112-162

132-188

151-217

102-172

128-202

151-251

2.4 GHz/5 GHz（5.15GHz-5.25GHz;5.725GHz-5.825GHz），
IEEE 802.11a/g/b/n；IEEE 802.11ac

BT4.1+BLE

Support

w

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may
cause undesired operation.

FCC Radiation Exposure Statement:

L

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

© 2018 Beijing Beebox Technology Co.,Ltd. all rights reserved. Printed in China.

317-00488-01