Beijing Backbone Computer Technology IDRS-IPCAM1-Q, IDRS-IPCAM1-H, IDRS-IPCAM1-D, IDRS-IPCAM1, IDRS-IPCAM2 User Manual

IDRS IP Camera IE Client User Manual

IDRS IP CAMERA (OR DVS)

IE Client

User Manual

Beijing Backbone Computer Technology Co.,Ltd

Tel: [phone] Fax: [phone]

www.chinasecuritysystem.com

IDRS IP Camera IE Client User Manual

Content

1. FEATURES........................................................................................................................................................3

2. PRODUCTS SHAPE.........................................................................................................................................4

3. IP SEARCH & SET...........................................................................................................................................5

4. IP CAMERA(OR DVS) TO IE CONNECTION & OPERATION.......................................................................6

4.1FIRSTTIMEINSTALLATIONWITHPLUG‐IN.............................................................................................................................6

4.2MAININTERFACE...........................................................................................................................................................8

4.2.1 Operation introduction...................................................................................................................................9

4.2.2 Playback interface operation...................................................................................................................... 10

4.2.3 Log search interface operation..................................................................................................................12

4.3REMOTESETTINGOPERATION.........................................................................................................................................12

4.3.1 Configure parameters of server.................................................................................................................12

4.3.2 Channel parameters configuration............................................................................................................ 14

4.3.3 Serial parameters set up.............................................................................................................................18

4.3.4 Alarm parameters setup ..............................................................................................................................19

4.3.5 User setup............................................................................................................................... ......................21

4.3.6 Other functions............................................................................................................................... ..............22

5. SPECIFICA TIONS...........................................................................................................................................24

2 / 30

IDRS IP Camera IE Client User Manual

1. Features

Camera

1　 /3" Sony Super HAD CCD

Horizontal　 resolution 540/480/420 TV Lines

Auto　 Day/Night Switch

Auto　 electronic shutter and auto gain control

IR　 LED: ¢5×36PCS

IR　 distance: 30m

Video Compression

H.264　 compression algorithm with high compression ratio & good image quality

Set　 -able video quality and bit rate

Support　 up to D1 (4CIF) resolution

Multi　 -zone motion detection function

Support　 Mask function to mask sensitive area

Video　 signal loss alarm function

Position　 configurable OSD&LOGO function

Support　 both variable bit rate and variable frame rate

Support　 SD card

Network function

Support　 TCP, UTP, RTP, DHCP, etc

Support　 ADSL (PPPoE) dialup function

Remote　 parameters setup

Remote　 playback, download the recorded files in DVR

Remote　 record function

Remote　 upgrade function

Remote　 control PTZ

Support　 Internet Explore for network preview

Network　 voice talk

Related Software

IDRS　 - NVR Client software

IDRS　 - NVMS

IE　 Browser (Web function)

IDRS　 - PC Based DVRs Server Software

3 / 30

IDRS IP Camera IE Client User Manual

2. Products Shape

---------------------------------------IDRS-IPCAM1--------------------------------------------- IDRS-IPCAM2------------------------------------

----------------------------------------IDRS-IPCAM3--------------------------------------------------------IDRS-IPDOME3-----------------------

----------------------------------------------------------------------------IDRS401D----------------------------------------------------------------------

----------------------------------------------------------IDRS-401A/IDRS-402A/IDRS-404A-------------------------------------------------------

4 / 30

IDRS IP Camera IE Client User Manual

3. IP search & set

In the network camera software packages, there is a "search software SADP of IP Camera" folder,

including SADP software. SADP software is used to identify and configure all the cameras’ IP address

and mask address in the LAN (must be in an open state). SADP software uses unique search activated

equipment technology, when the user does not know or has forgotten network camera's IP address, can

find it via SADP software. This software can be run in Windows2000/XP system, and needed the support

from the operation of Wincap; users need to install software Wincap Package, The packages include

"WinPcap_3_1_beta_3" software.

SADP is not needed to be installed, can be run directly, the software will automatically search IP

cameras in the LAN after running, then displayed the cameras in the table form, as below: Initiative

IP address: 123.127.244.165

Display the IP address; connect port and

Hardware series number of equipments

searched out

Here you can change the current equipment’s IP address and mask address, then input the one you

want, after that, click .

Note:

The new IP address will take effect after restarting this equipment.

5 / 30

IDRS IP Camera IE Client User Manual

4. IP Camera(or DVS) to IE connection &
operation

4.1 First time installation with Plug-in

When you want to connect to the network camera, only need to input the network camera's IP address in

the IE Address bar, then click the "link" or the "Enter" button on the keyboard.

If it is your first time to access to the network cameras through the IE browser, the operating system will

prompt you to install a plug-in, as the following picture: (Take Windows XP-as the example, basically

similar to other operating systems.)

Click to install this Active X. You need to wait different time according to different net

speed. (Usually between 20-120 sec)

After installation, the page will automatically enter into the user interface to verify the users,

Inputs the corresponding connects port, the user name and password, and selects the suitable stream

type (Master Stream, Sub Stream. See more information: 4.3.1), after all this, click OK, and then enter

the main browser interface, as below:

Default admin name：Admin
Default admin password：12345
Default connect port：8000

6 / 30

IDRS IP Camera IE Client User Manual

Note：

If no window displayed or no respond after clicking on the installation button, check whether there is

third-party software (such as firewalls, YAHOO assistant, 3721, and other software) to restrict the

installation, if there are restrictions from third-party software, please remove the restrictions, or

temporarily close the third-party software or firewall.

In addition, please make the following adjustments in the "IE security settings" of "Internet Options":

1) Click the [customer level], then click [ok].As below:

2) Access to security settings of pages, use the settings circled in the bellowed picture. (This picture

shows Windows XP-option, Windows2000 similar to this).

7 / 30

IDRS IP Camera IE Client User Manual

4.2 Main interface

The logon interface will be displayed automatically after installation of plug-in. Input related user name

and passport, as below:

Notice:

Initiative User name: admin

Passport: 12345

8 / 30

4.2.1 Operation introduction

Device list,

double-click

: Connect

to image;

double-click

again:

disconnect

to image

IDRS IP Camera IE Client User Manual

Connect/disconnect image

Snapshot

Manual record

Talkback (available to talk to web servant positively)

PTZ control button: control pan / tilt/zoom/aperture, as

well as position of presetting

Notice: before control, preset control protocol/address

code/bit rate etc.

9 / 30

Adjust saturation, grayscale, contrast, brightness.

Real-timely adjust eavesdropping volume. Restore default

by pressing lower-right corner. Mouse-hovering appears

hint

4.2.2 Playback interface operation

Press into search interface, like picture:

IDRS IP Camera IE Client User Manual

Play button provides play, stop, slow play, rapid play and

frame play. Mouse-hovering appears hint

During remote playback, support snapshot, instant store, adjust

playback volume. Press download button and wholly download video data selected.

10 / 30

IDRS IP Camera IE Client User Manual

Search criteria: time search or video type

search

Start to search

Search result list displays all related video

data, select and press “playback”

11 / 30

4.2.3 Log search interface operation

IDRS IP Camera IE Client User Manual

Select related search type on the right, press “search” button and display all logs needed. Press
button on the lower right corner and move logs to local computer.

4.3 Remote setting operation

4.3.1 Configure parameters of server

Press “Server parameters” item (like below picture) involves Server Configuration Information, Network

Configuration Information and Server Version Information.

12 / 30

IDRS IP Camera IE Client User Manual

Server Configuration Information:

Server name: max.32 characters or 16 Chinese characters.

Device number: 1.5 or more new version number is max. 255; 1.4 version number is max. 100.

Loop record: when HD space is full, press “yes” with continuing record and covering old file; press “no”

with stopping record.

Channel quantity, HD quantity, alarm-in quantity, alarm-out quantity, server type and
serial-number of server can not be revised.

IP address & port number & mask code: server’s fixed IP address, port number and mask code.

Default code of port: 8000.

Gateway address: when client visits server with cross-gateway, gateway IP must be put in.

13 / 30

IDRS IP Camera IE Client User Manual

Manage host IP & port number: IP address and port number of PC host of receiving alarm signal.

HTTP port number: used when visiting server by web pattern.

Physical address of server: PPPoE address can not be revised.

Server version information: main-control version, HD version, encode version and front panel version

can not be revised.

Setting finishes and press “save”. Some parameters require restart server for taking effect, press
“restart” button.

4.3.2 Channel parameters configuration

In remote configuration column, select “channel parameters”, like below picture

14 / 30

IDRS IP Camera IE Client User Manual

Main stream: main encode mode for device; record parameter for DVR

Sub stream: mainly applied for network transmission, suitable in unfavorable network.

Event parameter：when event trigger happens (e.g. Motion detection alarm, mask alarm, signal quantity

alarm), record parameter switches from timing record parameter to event compression parameter; when

event is over, event compression parameter switches back to timing record parameter. Event parameter

is optional.

Bit rate upper limit: select a parameter for limiting compression stream. 32K, 48K, 64K, 80K, 96K,

128K, 160K, 192K, 224K, 256K, 320K, 384K, 448K, 512K, 640K, 768K, 896K, 1M, 1.25M, 1.5M, 1.75M,

2M, customize

Video frame rate: full frame rate (PAL25f/s, NTSC30f/s), 20, 16, 12, 10, 8, 6, 4, 2, 1, 1/2, 1/4, 1/8, 1/16.
(Notice: 15, 18, 22 applies in dedicated servers)

Image quality: 6 gears optional ()

Resolution: default is CIF, others options include QCIF, 2CIF, DCIF, 4CIF. Sub stream options include

QCI and CIF.

Bit rate type: variable bit rate and fixed bit rate is optional

Set timing record:

Select “record plan”, also can set record time, and prerecord time and record delay. Press “setup”, enter

timing record plan interface, as below picture

15 / 30

IDRS IP Camera IE Client User Manual

Select timing record mode, set relevant period. If select 24-hours record, only can set record type.

Setting finishes, press “OK” for saving then exits configuration interface. When configuration is

unnecessary

Note: If set up the record method mobile detection or alarm video, and we should set up the mobile

detection and alarm deployment.

Pre-recorded time: the video took place before the alarm time, the options do not have to deal with, 5

seconds (default), 10 seconds, 15 seconds, 20 seconds, 25 seconds, 30 seconds, without restriction.

Delay Video: Video alarm occurs when the number of recorded time, there are options for 5 seconds, 10

seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes.

Mobile detection, video loss, blocks the view of the alarm, video cover:

Select the required set of options, you can set the region, deployment time and the way linked. Click "set

the region," come into the interface, as the following chart:

Display area: select "display area", will be able to view the original settings of the region

Regional settings: select "set up regional", holding down the【Ctrl】 keyboard keys, use the mouse to

set up regional location, at the same time hold down the left mouse button and drag the mouse, you can

16 / 30

IDRS IP Camera IE Client User Manual

draw a box in the region, after a good painting Release the left mouse button, they set up a regional.

Mobile can be set up to detect a number of regions, video can be set up to cover 4 regions, can only

block one area.

Choose Sensitivity: mobile detection can choose to 7, respectively, on behalf of the slider left to right:

"closed" and 0-5 sensitivity of seven options, the lowest sensitivity of 0, 5 the highest. The police can

choose to block 4, respectively, on behalf of the slider left to right: closed lower general and high

Click the "deployment time"; come into the set-up time interface, as the following chart:

Deployed in a specific period of time, an effective way to deal with the alarm.

Click the "linkage"; come into the Linkage interface settings, as the following chart:

17 / 30

IDRS IP Camera IE Client User Manual

Select video channel trigger: the trigger-channel video channel can be a can also be a number.

Set up to deal with the alarm: the choice of channel output linkage approach, you can select one or

more of the warning means.

Finished the setup, click "OK."Save the set up and come out the interface, not need to save click the

“cancel”, return to the control parameters setup interface

OSD attributes: can choose whether or not to display OSD, show the location, it shows the week, OSD

attributes (state show that: do not blink opaque, not transparent and blinking, blinking and transparency,

opaque blink, do not show), OSD type (Display format: XXXX - XX-XX (date), XX-XX-XXXXX (on

Japan-year), XXXX in XX on XX day, XX, XX on XXXX in, XX-XX-XXXX (in the sun), XX, XX on XXXX ).

Set channel name attribute: You can choose whether or not to display name of the channel as well as

the location of the show.

Superposition characters: can choose characters superimposed images, stacking up to 4 lines of 22

characters per line (44 characters).

Finished setting Parameter, click "OK." If the parameter can take effect only by restart click the "Restart"

button.

(Note: regular video, mobile detection, video loss, block, block the view of the alarm settings in the
name of the channel information and can not be copied to other channels)

4.3.3 Serial parameters set up

Choose the "serial parameters" in the remote set up, as the following chart

The interface can set up the RS232 and RS485‘s relevant parameters

18 / 30

IDRS IP Camera IE Client User Manual

Finished the setup of Parameter, click "OK." If the parameters can take effect only by restart, please

restart.

4.3.4 Alarm parameters setup

Choose the “alarm parameters” in the following chart; we can set up the alarm quantity parameters and

abnormal parameters in the interface.

19 / 30

IDRS IP Camera IE Client User Manual

Alarm input process:

Choose the process”, the police enter click "deployment time"; come into the report to the police

deployed in time as the following chart:

20 / 30

IDRS IP Camera IE Client User Manual

After setup the deployment time, click "OK" button to save and come out the configuration interface. If

not need save the set up click the "Cancel" button and return to the police parameter configuration

interface

Click the alarm input “linkage", come into the alarm input “linkage" interface, as the following chart:

After set up the deployment time, click "OK" button to save and come out the interface. If not need to

save ,click the “cancel” and return to the alarm parameters interface.

Unusual Information setup:

Unusual configuration information including full hard disk, hard disk errors, broken lines, IP address

conflicts, illegal access, input / output system does not match the video, and so on, also can choose the

alarming process method.

Finished the setup of Parameter, click "OK." If the parameters can take effect only by
restart ,please restart .

4.3.5 User setup

Choose the “user purview” in the remote setup, as the following chart::

21 / 30

IDRS IP Camera IE Client User Manual

We can mange the server in the interface. Including user names, passwords, we can added and the

abolition of authority by check on the” authorization”.

When users select the user's permission to view. If the user already exists, right-node when the user

pop-up menu, select "modify" the user to manage. Select the "delete" to delete the user. Super users

can not be deleted. If the user does not exist, choose "modify" the user add the user, select "Cancel" and

set out the setup.

Finished the setup of Parameter, click "OK." If the parameters can take effect only by restart ,please

restart .

Note: If you set up IP address binding, only the binding IP addressee’s PC can access the equipment,
not recommend to use.

4.3.6 Other functions

Choose the “other functions” in the remote setup. As the following chart:

22 / 30

IDRS IP Camera IE Client User Manual

You can remote upgrade the server and format the hard disk in the interface.

Select the "remote upgrade", click "Browse", choose the upgraded files. Click the "upgrade" to start

upgrading. Finished the upgrade, suggesting "success to upgrade the server and please restart it.”

Select "hard disk format", choose the hard disk need to operate(or a full hard drive), click the "format",

suggestion” formatting the hard disk ” finished the format, suggesting that " success formatting the

hard disk "

Notice :finished the remote upgrade and format the hard disk ,need to restart the device ,during
the course ,can’t be do other operation.

23 / 30

IDRS IP Camera IE Client User Manual

5. Specifications

Models IDRS-IPCAM1-Q IDRS-IPCAM1-H IDRS-IPCAM1-D

Image Sensor 1/3″ SONY Super HAD CCD

Horizontal Resolution 540TVL 480TVL 420TVL

Efficiency Resolution PAL: 704×576, NTSC:704×480(H ×V)

Electric Shutter PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s

Min. Illumination 0 Lux

S/N Ratio > 48dB(AGC off)

Gamma 0.45

Lens Connector CS

Video Output 1Channel, BNC(1.0Vp-p, 75Ω)

Back Compensation on

Video Compression H.264

Storage Medium SD Card

Compression Resolution QCIF/CIF/2CIF/DCIF/4CIF

Video Frame Rate PAL: 1/16—25f/s, per channel NTSC: 1/16—30f/s per channel

Stream Type Video &audio mixed stream or video stream

Video Bit Rate 32Kbps~2Mbps (Self-define)

Audio Output 1channel, RCA jack

Audio Input 1channel , RCA jack(2Vp-p, 1kΩ)

Communication Interface 1 RJ45 10M/100M UTP network interface,1 RJ45 RS-232 interface

Alarm Input 1

Alarm Output 1

Power Supply DC 12V

Operating Temperature

Operating Humidity

Dimension 133×61×62mm(L × W × H)

Weight 0.42kg (N.W),0.49kg(G.W)

-10˚C--＋55˚C

10％--90％

PAL:500×582, NTSC:510×492(H ×V)

24 / 30

IDRS IP Camera IE Client User Manual

Models IDRS-IPCAM2-Q IDRS-IPCAM2-H IDRS-IPCAM2-D

Image Sensor 1/3″SONY Super HAD CCD

Horizontal Resolution 540TVL 480TVL 420TVL

Pixel PAL:752×582, NTSC:768×494(H ×V)

Electrical Shutter PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s

Min. Illumination 0 Lux

S/N Ratio > 48dB(AGC off)

Gamma 0.45

Lens 12mm(6mm, 8mm,)

Back Compensation on

IR LED 850nm

IR Distance 30m

IR Status Light below 10 Lux, CDS automatically open

Video Compression H.264

Storage Medium SD Card

Compression Resolution QCIF/CIF/2CIF/DCIF/4CIF

Video Output 1channel,BNC(1.0Vp-p,75Ω)

Video Frame Rate PAL: 1/16—25f/s per channel ,NTSC: 1/16—30f/s per channel

Stream Type Video &audio mixed stream or video stream

Video Bit Rate 32Kbps~2Mbps (Self-define)

Audio Output 1channel, RCA

Audio Input 1channel ,RCA(2Vp-p,1kΩ)

Communication Interface 1 RJ45 10M/100M UTP network interface

Alarm Input 1channel

Alarm Output 1channel

Power Supply DC 12V

Operating Temperature

Relative Humidity

Dimension 200×83 ×83mm(L × W × H)

Weight 0.9kg (N.W)

-10˚C--＋55˚C

10％--90％

PAL: 500×582

NTSC: 510×492(H ×V)

25 / 30

IDRS IP Camera IE Client User Manual

Model IDRS-IPCAM3-Q IDRS-IPCAM3-H IDRS-IPCAM3-D

Image Sensor 1/3″SONY SUPERHAD CCD

Resolution 540TVL 480TVL 420TVL

Pixel PAL:752×582, NTSC:768×494(H ×V) PAL: 500×582

NTSC: 510×492(H ×V)

Electric Shutter PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s

Min. Illumination 0 Lux

S/N Ratio > 48dB(AGC off)

Gamma 0.45

Lens 12mm(4mm, 6mm, 8mm, 16mm)

Back Compensation on

IR LED 850nm

IR Distance 30m

IR Status Light below 10 Lux, CDS automatically open

Video Compression H.264

Storage Medium SD Card

Compression Resolution QCIF/CIF/2CIF/DCIF/4CIF

Video Frame Rate PAL: 1/16—25f/s, NTSC: 1/16—30f/s,

Stream Type Video &audio mixed stream or video stream

Video Bit Rate 32Kbps~2Mbps (Self-define)

Communication Interface 1 RJ45 10M/100M UTP network interface

Alarm Input 1channel

Alarm Output 1channel

Power Supply DC 12V

Operating Temperature

Relative Humidity

Dimension 226×83 ×80mm(L×W×H)

Weight 1.2kg

Protection Grade IP66

-10˚C--＋55˚C

10％--90％

26 / 30

IDRS IP Camera IE Client User Manual

Models IDRS-IPDOME3-H IDRS-IPDOME3-X IDRS-IPDOME3-W

Camera

Image Sensor 1/4″SONY CCD Image Sensor

Effective Pixels PAL:752×582 NTSC:768 x 494(H x v)

Horizontal

Resolution

Day/Nigh Function

Min. Illumination 0.01Lux 0.002Lux Color:0.4 Lux

Wide Dymanic

Range

S/N Ratio >50dB

Electric Shutter PAL=1/50 -1/100,000 s, NTSC=1/60 -1/100,000 s

Lens f=4-88mm

Zoom Optical zoom 22X, Digital

Pan Travel 360° continuous

Tilt Travel 90°

Pan/Tilt Speed 0.5°~300° per second

Pan/Tilt Accuracy ± 0.5°

Preset Positions 128

Preset Tours 6

Address Range 0~255

Protocol Pelco-D, Pelco-P etc

Baud Rate 1200bps, 2400bps,4800bps,9600bps

Long-focus

Speed-limited

Built-in Memory To

Store The Setting

Home Position The first preset position

Video Compression H.264

Storage Medium SD card

Compression

Resolution

Video Output 1 channel, BNC (1.0Vp-p, 75Ω)

Video Frame Rate PAL : 1/16--25 fps, NTSC : 1/16--30 fps, adjustable

Stream Type Video & audio mixed stream or video stream

Video Frame Rate 32Kbps~2Mbps (Self-define)

Communication

Interface

With

With

QCIF/CIF/2CIF/DCIF/4CIF Compression

1 RJ45 10M / 100M UTP network interface

480TV lines 480TV lines 540TV lines

Manual/ Auto

No No With

zoom 10X

Manual/ Auto (IR Cut

Removable Filter)

f =4.1～73.8mm

Optical zoom 18X, Digital

zoom 12X

Speed Dome

IP Module

Manual/ Auto (IR Cut

Removable Filter)

B/W:0.001 Lux

Digital Slow Shutter: 0.006 Lux

f=3.3～99mm

Optical zoom 30X, Digital

zoom 8X

27 / 30

IDRS IP Camera IE Client User Manual

General

Operating

Temperature

Relative Humidity 0 to 95% RH (Non condensing)

Power Supply AC24V 60Hz/50Hz

Power

Consumption

Protection Grade IP66

Weight 3.6kg

Dimension 200x285mm

-30~65˚C

70W

28 / 30

IDRS IP Camera IE Client User Manual

A

A

A

A

A

A

A

Model IDRS401D

Video Compression H.264

Compression Resolution D1,DCIF,2CIF,CIF,QCIF

Video Input 1

Video Signal

Frame Rate

Stream Type Video and audio Mixed stream or Video Stream

Video Bit Rate 32Kbps~2Mbps (Self-define)

udio Input 1

udio Input Signal BNC (Linear Electrical Level , Resistance:1000Ω), SNR > 83DB

udio Output 1 Channel, BNC (Linear Electrical Level)

udio Compression Ogg Vorbis

udio Bit Rate 16Kbps

Voice Audio Input (MIC) 1 Input , RCA jack

Communication

Interface

larm Input 4

larm Output 2

Power Supply DC 12V

Power Consumption Less than 4.5W

Operating Temperature

Relative Humidity 10%-90%

Dimensions(L×W×H) 100×68×41mm

Weight 0.3 Kg

BNC (Electrical Level: 1.0Vp-p, Resistance: 75Ω)

NTSC/ PAL System Auto Recognition

PAL: 1/16fps-25 fps per channel

NTSC: 1/16fps-30fps per channel

1 RJ45 10M/100M Self-adaptable Ethernet Interface, 1 RS232 interface, 1 RS 485 interface for

PTZ

-10˚C-- ＋ 50˚C

29 / 30

IDRS IP Camera IE Client User Manual

A

A

A

A

A

A

A

Model IDRS401A IDRS402A IDRS404A

Video Compression H.264

Compression Resolution CIF,QCIF

Video Input 1 2 4

Video Signal

Frame Rate

Stream Type Video and audio Mixed stream or Video Stream

Video Bit Rate 32Kbps~2Mbps (Self-define)

udio Input 1 2 4

udio Input Signal BNC (Linear Electrical Level , Resistance:1000Ω), SNR > 83DB

udio Output 1 Channel, BNC (Linear Electrical Level)

udio Compression Ogg Vorbis

udio Bit Rate 16Kbps

Voice Audio Input (MIC) 1 Input , RCA jack

Communication

Interface

larm Input 4

larm Output 2

Power Supply DC 12V

Power Consumption Less than 4.5W

Operating Temperature

Relative Humidity 10%-90%

Dimensions(L×W×H) 123×198×39mm

Weight 1.5 Kg

BNC (Electrical Level: 1.0Vp-p, Resistance: 75Ω)

NTSC/ PAL System Auto Recognition

PAL: 1/16fps-25 fps per channel

NTSC: 1/16fps-30fps per channel

1 RJ45 10M/100M Self-adaptable Ethernet Interface, 1 RS232 interface, 1 RS 485 interface for

PTZ

-10˚C-- ＋ 50˚C

30 / 30