Beijing Akeso Eyecare Tech 530 User Manual

Product Instructions

Please read the instructions carefully before using the product and keep

Basic parameters

Manufacturer: Beijing Akeso Eyecare Tech CO.,LTD

Product Name: Smart Eyewear Temple

Model: AKESO SMARTCARE1.0

Temple size

Material temple Switzerland TR-90 memory material

Bluetooth 4.0 BLE chip software parameters / acceleration sensor / temperature and

humidity sensor / UV Sensor / Light Sensor

parameter

battery voltage : 3.7V

Charging voltage : 5V

Working current : 60mAh

Standby Current : 1A

Operating temperature :-20~40Degree

Product Introduction :Smart Eyewear Temple

Inside

Outer

Mounting holes for mounting and dismounting AKESO temple.

Sensor temperature and humidity sensors, UV sensor, a light sensor, an acceleration

sensor.

The charging contacts and charging contacts to the smart docking temple charging.

1. The information light red light indicates charging status.

2. The red light off when charging is complete.

3. The green light flashes, which indicates the standby state.

4. The green light is off, the Bluetooth device matches, into the working state.

Intelligent Power Switch 1. Click to open the temple switch, turn on the Bluetooth device to

search for.

2. When the buzzer sounded, click the button to turn off the beep.

Product Introduction

Operating temperature

Working humidity

Working height

Intelligent charging contacts temple charging contacts

USB charging port charging port digital out big mouth, can give mobile phones and other

electronic devices charged.
Power Switch 1. Information light blue represents the normal power ≥10%,

2. Information on behalf of red light running low.

3. When charging the red light flashes, red light after charging is completed.

USB charging port small port in charging treasure usb charging port.

Stop surface charging for an intelligent leg side full contact with the stopper, which

reached the correct charging position.

Installation Notes

Frame mounting interface

Temple mounting interface

Installation mouth shape

Hinge installation at the mouth, the temple hinge to advance until the hinge and temple

completely fit.

The temple to the hinge and fully fit after rotated 90 degrees to the inside of the glasses.

Inward rotated 90 degrees, you will hear the crisp sound of the closing, to complete the

installation.

Charge Description

Smart charging contacts and charging cradle leg contact contact.

The top of the leg and intelligent charging cradle stop surface coincide.

Legs and intelligent LED lights start flashing, charging already begun.

Movie charging cradle

Working condition

Charging

Fully charged
Power ≥25%
25% ≥ electricity ≥10%

Power <10%

LED indication mode

Working LED flashes

Red LED lit

Solid blue LED

Flashing blue LED

Red LED flashes

Product Introduction

Open Smart Leg

Turn on the power switch, the light is green and the message "beep" sound, turn on the

Bluetooth mobile phone to search for Bluetooth devices, the search to the device name

with akeso, connect matching input matching code "770 820" After a successful

connection, the information light automatically off.

Turn off smart leg

After disconnecting the device, information flashes green lights, press the power button,

the buzzer "beep" sound. Intelligent leg that is already closed.

Data monitoring

Periocular humidity monitoring

Ambient temperature

Neck angle

Light intensity