Beijing AIQI Technology OBEDU09AIQI User Manual

Specifications

FCC Statement

Name: ONEBOT Educational Mini Robot
Model: OBEDU09AIQI
Gross weight: 1160g
Input voltage: 3V
Input current: 1.0A

Wireless connectivity: Bluetooth 4.1
Materials: ABS and PC
Ages: 6 years+
Storage temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Operating temperature: -10°C ~ 45°C (14°F ~ 113°F)

Precautions

Do not dismantle the electronic components. Remove the baeries from the baery cartridge
if the product will not be used for a long time.

Do not expose the product to sunlight, fire, heat or environments where temperature is
above 60°C (140 °F).

Do not short circuit.
Do not crush or puncture.
Avoid direct sunlight. This product can be cleaned with water or a damp cloth. Please keep

the pieces clean and dry.
Regularly check for any damage to cord, plugs, enclosure and other parts. And they must not

be used until the damage has been fully repaired.

IC Statement

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause interference,
and (2) This device must accept any interference, including interference that may cause undesired
operation of the device.

Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) L'appareil ne
doit pas produire de brouillage, et (2) L'utilisateur de l'appareil doit accepter tout brouillage
radioelectrique subi, meme si le brouillage est susceptible d'en compromere le fonctionnement.

This device

Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and(2) This device must accept any interference received, including interference
that may cause undesired operation.

Aention that changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential isnallation. This product generates, uses,
and can radiate radio frequency energy and, if not installed and used in acordance with the
instructions, may cause harmful interference to radio communications, However, there is no
guarantee. that interference will not occur in a particular insallation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit diferent from that to which the receiveris
connected.
—Consult the dealer or an experienced radio/TV technician for help.

complies with Part 15 of the FCC Rules.

FCC ID: 2ALJ6-OBEDU09AIQI

ONEBOT Educational Mini Robot

User Manual

IC ID: 25212-OBEDU09AIQI

CAN ICES-3(B)/NMB-3(B)

Accessories

Baery Cartridge

×2

Intelligent Brick

Manufactured by: Beijing AIQI Technology Co., LTD.
Address: Room.D1203, The11thfloor, BlockD,No.9Shangdi3rdSt.,
HaidianDistrict,Beijing, 100085, China
Made in China

Thank you for choosing the ONEBOT Educational Mini Robot

This product requires two AA baeries.
Non-rechargeable baeries cannot be recharged.
Rechargeable baeries must be charged under adult supervision.
Rechargeable baeries must be removed from the product before recharging.
Different types of baeries or new and used baeries are not to be mixed.
The supply terminals are not to be short-circuited.
Baeries must be placed according to their correct polarity.
Remove exhausted baeries from the product.

×2

Motors×4

Color sensor×2

Correctly Powering On/Off

Read this manual carefully before use, and retain it for future reference

2. Intelligent Brick

Puzzle
Connector

Magnetic Port Restore

Controller
Master Indicator

RESET

Factory Seings

3. Device

ONEBOT Educational Mini Robot

User Manual

Read this manual carefully before use, and retain it for future reference

Block Packs

×7

User Manual

Wheels×6

Baery Installation

The ONEBOT Educational Mini Robot requires two AA baeries. Follow the steps below to install:

The installing and uninstalling of baeries shall always be done by an adult.
Open the baery cartridge lid by pushing in the direction indicated on the lid.
Install the two AA baeries in accordance with the positive and negative polarity markings
on the boom of the baery cartridge and baeries.
Place the baery lid correctly on the baery cartridge and push the lid into place. Check
that the location hole is correctly aligned.

Align location hole

Connect the baery cartridge to the intelligent brick aer installing the baeries.

Power On: Turn on the baery cartridge, and then the intelligent brick's light is on with an

Power Off: Turn off the baery cartridge, and then the intelligent brick's light is off with out

audio prompt.

an audio prompt.

Product Overview

1. Baery Cartridge

Baery Lid Direction
Indicator

Location Hole

Switch

Magnetic PortBaery Cartridge

Puzzle
Connector

Transmission
Sha

Magnetic Port

Restore
Factory Seings

Installing the ONEBOT Kids

1. Search “ONEBOT Kids” in the application store or scan the QR code below to download
ONEBOT Kids app.

Android 4.4.0 and above

iOS 9.0 and above

2. Connect to the ONEBOT Kids.

Connect the baery cartridge and the intelligent brick. Ensure that the baeries have been
properly installed into the cartridge and turned on. Open up the ONEBOT Kids app and turn
on Bluetooth. Tap on the Bluetooth icon in the upper le corner of the main screen. Search
for discoverable Bluetooth devices, and tap on the discovered device to connect to the
ONEBOT Kids.

3. Building courses can be acquired from APP.