Behavior Tech Computer MSM960A Users manual

(

MM996600AA WWiirreelleessss OOppttiiccaall MMoouussee QQuuiicckk GGuuiiddee

Congratulations on your purchasing this exciting mouse. Your new mouse is easy to install and
offers you a host of useful features. The great features of this mouse are wheel for quick
scrolling and wireless function for easy movement. With the wireless function, you can pass
around the mouse during meetings without bothering from a cable or you can write e-mails and
surf the Internet from the comfort of your living room couch. All those human-oriented
characteristics make you feel more comfortable and efficient while surfing on the website or
using applications. Please install the MouseMaestro Input Device driver to find more great
functions!

System Requirements

 Microsoft® Windows® 95, Windows® 98, Windows® ME, Windows® 2000 or Windows®

XP operating system

Hardware Installation

1. Turn off your PC system first.

2. Plug in the receiver’s PS/2 connector into the available
PS/2 mouse port.

3. Make sure that two AA alkaline batteries are installed
correctly. (Follow the polarity signs in the battery
compartment.)

4. Turn on your PC system.

PS/2 Connector

ID Setting

This wireless optical mouse contains 256 sets ID. This ID-recognition function helps to protect
against interference from other RF products in the same environment. Remember to reset the
ID when you replace the batteries.

 The word CONNECT labels the ID button on each unit.

 The LED under ID button of receiver shows connecting condition.

1. Firstly, press the ID button on the bottom of the mouse once.

2. Then press the ID button on the top of the receiver once.

ID Button(LED)

ID Button

ID Button on mouse bottom

ID button of Receiver

With LED under the ID button)

Note:

1. You must follow the procedure above to complete ID setting.

M960A QG

3100506330 v1.0

2.

The whole procedure should be completed within 15 seconds, or you will need to start
again.

M960A QG

3100506330 v1.0