Behavior Tech Computer MSM859C Users manual

MM885599CC OOppttiiccaall MMoouusse

QQuuiicckk IInnssttaallllaattiioonn GGuuiidde

Congratulations on your purchasing this exciting optical mouse. This multi-function optical
mouse is with great features, wheel for quick scrolling and optical sensor for preventing from the
interference caused by dust. All those human-oriented characteristics make you feel more
comfortable and efficient wh ile surfing on the w ebsite or using applications. After the Key Maestro
driver installed, you will have seven extra functions to select for buttons, Quick Jump, Double
Click, Window Zoom, Switch AP, Auto Panning, Ba ck and Forward. M oreover, the Quick Jump
button is bonded with most often-used functions, Mouse Control Panel, Control Panel, Horizontal
Scroll Bar, Vertical Scroll Bar, Minimize All Windows, Size Grip, Windows Explorer, Recall the
Last Active Window and Exit. Please install the KeyMaestro Input Device driver to find more
great functions!

e

e

System Requirements

¾ Microsoft® Windows®NT 4.0, Windows®95, Windows®98, Windows®ME,

Windows®2000 or Windows®XP operating system

Note: For USB model, it is only suitable for Windows®98, Windows®ME, Windows®2000 or

Windows®XP operating system

Hardware Installation

Connect the Mouse to Your PC System

1. Turn off your PC system. Remember to turn off your PC system before you connect or

disconnect the mouse unless you use a USB device in Windows 98, Windows 2000 or
Windows ME.

USB Mouse Port

2. For the USB model, connect the mouse to the USB port on your PC system.

3. Turn on your PC system.

Software Installation

1. Insert the disk labelled “KeyMaestro Input Device Driver” into your disk drive.

2. Open File Explorer to find “Setup.exe” from the disk.

3. Double-click the “Setup.exe”.

4. Then follow the instruction on the screen to install the driver. The default install path is set

to c:\MMaestro. You have the option to change the install path during set-up.

5. Set up will indicate when installation has successfully completed. The driver is loaded w hen

you see the driver icon
system needs to restart.

Note: Before installing the KeyMaestro input device driver for USB optical mouse, you have to make sure

that the USB device driver has been installed and the USB optical mouse is recognized by Windows
operating system. You may press any button to see if it is correspondently, and thus to know the
mouse works well.

in the system tray (lower right corner of the screen). The operating

1/2

Battery Low Alarm

After installing the KeyMaestro Input Device Driver, computer will display a battery low icon

on the upper-right corner of your screen and flash for 10 seconds to indicate low batteries

when the batteries are low in the unit.

Important

1. This optical mouse uses light to sense movement. It cannot work on a glass, translucent o r

reflective surface.

2. Use the mouse only on a clean , flat, non- slippery , opaqu e surf ace in order to ensu re sm ooth

and accurate cursor action.

FCC GUIDELINES

This equipment has been te sted a nd found to c om ply w ith the lim its f or a C lass B digita l devi ce, purs uant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accord an ce with th e in stru ctio ns may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the u ser i s encouraged to try to correct th e i nterference by
one or more of the following measures:

 Reorient or relocate t he receiving antenna
 Increase the separation between the equipment and recei ver
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help .
 Use only shielded cables to connect I/O devices to this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. (2) Thi s d evice must accep t any interference received ,
including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.

2/2