Behavior Tech Computer KB9116URF Users manual
9116URF Wireless Keyboard
with Joystick
Manual
Version 1.0
封面內頁
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.
Cet appareil numerique de la class B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference. (2) This device must accept any interference received, including interference that may
cause undesired operation.
This equipment is intended for use in the following countries EU 15 countries:
Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Spain, Sweden, United
Kingdom, Portugal, Greece. And other non-EU countries: Switzerland, Norway, and Iceland.
低功率電波輻射性電機管理辦法：
第十四條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計
第十七條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. Shielded interface cable, if any, must be used in order to comply with emission limits.
The information in this document is subject to change without notice and does not represent a commitment on the part of the
vendor.
No warranty of representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any
particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document
and/or the products associated with it at any time without obligation to notify any person or organisation of such changes.
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the
use or inability to use this product or documentation, even if advised of the possibility of such damages.
Copyright © 2003. All rights reserved
IBM, PC/AT and PS/2 are registered trademarks of International Business Machines Corporation.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States of America
and/or other countries.
All other trademarks are trademarks of their respective holders.
之特性及功能。
方得繼續使用。
前項合法通信，指依電信法規定作業之無線電信。
低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Table of Contents
Important Information................................................................................................... 2
1 Battery Installation .............................................................................................2
2 Receiver cable positioning................................................................................2
1 Introduction ............................................................................................................ 3
2 System Requirements ...........................................................................................4
3 Hardware Installation.............................................................................................5
3.1 Connecting and Battery Information ............................................................ 5
3.2 ID Setting ......................................................................................................... 6
4 Software Installation.............................................................................................. 8
4.1 Driver installation
4.2 Battery Low Indication
4.3 LED Indication
5 Using the Keyboard and Joystick Mouse............................................................ 9
5.1 Keyboard Functions....................................................................................... 9
5.2 Using Keyboard Embedded Numeric Keypad ...........................................10
5.3 Using the Joystick........................................................................................12
6 Troubleshooting...................................................................................................14
.....................................................................................8
.............................................................................8
..........................................................................................8
1
Important Information
1 Battery Installation
Please follow the instructions to install the batteries
correctly.
1.1 Open the battery compartment cover on the
bottom of the keyboard.
1.2 Follow the indication inside to place in keyboard
batteries.
1.3 Place the battery compartment cover back and
proceed with ID setting of the devices.
Important:
We recommend using alkaline batteries for a
longer battery life.
Always change batteries when battery low icon
appears.
Install keyboard driver first to ensure the battery
power is monitored.
Don't mix different types of batteries or new and
old batteries together. Always replace old
batteries with new and same type batteries.
Remove batteries after long periods of non-use.
Battery leakage or corrosion may damage the
device quality and cause danger.
2 Receiver cable positioning
2.1 Don't warp receiver cable around monitor or
LCD panel base.
2.2 Don't intertwine receiver cable with power
cables.
2.3 Don't bundle or bind receiver cable with other
signal cables.
2.4 Don't extend receiver cable unless absolutely
necessary, and let receiver cable run free from
other cables.
2
1 Introduction
Congratulations on your purchase of this wireless USB RF keyboard with mouse & dual mode
joystick mouse (with mouse & joystick functions). This wireless keyboard kit will not only free
you of the constraints of your desktop, but also provide you dual mode: mouse & joystick
functions for Internet browsing and game playing. Pass around the keyboard during meetings
without having to bother about a cable blocking your way or write e-mails and surf the Internet
from the comfort of your living room couch!
This keyboard kit consists a keyboard with mouse & dual mode joystick mouse, and a receiver.
The receiver is connected to your PC through the USB cable. The keyboard can be operated
freely within a radius of at least 6.56 feet (2 meter) from the receiver. Because the keyboard
uses radio frequencies to transmit the wireless signal, it has no constrictions on viewing angles
such as with infrared devices like your TV’s remote control, etc.
This keyboard has a special mouse & dual mode joystick mouse, which provides both mouse &
joystick functions. Under mouse mode, it provides “Quick Jump” function that can easily access
to Internet Menu, Multimedia Menu, and Office Menu. (Please Note: Please install the driver
first to enjoy this amazing function). And when under joystick mode in your exciting computer
games, you immediately can enjoy the convenience and easy of operating that joystick.
(
Please Note:
Besides providing unprecedented freedom movement when operating the keyboard and
joystick mouse, it also has a row of hotkeys including Internet, Multimedia, and Sleep key
(Please note: The Internet keys work only under Microsoft Internet Explorer 5.0 or later
version). This package also provides a special driver, which provides unique shortcut functions.
Joystick function can only be worked when playing computer games.)
In order to enjoy your keyboard of their full potential, we recommend reading this manual
carefully prior to installation.
What's in this package?
A wireless keyboard with joystick mouse
A rece iver
A driver CD (If the driver has already installed within system, there will be no driver CD
enclosed in package.)
A manual
A quick guide
Batteries (2 pcs of AA alkaline batteries)
3
2 System Requirements
Microsoft Windows 98, Windows ME, Windows 2000 or Windows XP operating
system
Microsoft Internet Explorer 5.0 or later version (for the Internet keys)
CD-ROM drive (for CD and Video operation)
Standard sound card (for CD and Video operation)
The system supporting ACPI or APM II (for power management buttons)
ATX mother board and ATX power supply (for power management buttons)
Available USB port
Please refer to table below for the other system requirements for the features.
Operating System
Function
Description
Wireless
Functionality
Extra Hot key
Functions on
Keyboard
Keyboard Extra
ACPI Keys
Mouse Function
Keyboard Battery
Low Indication
Keyboard LED
Indication
Windows 98
Available immediately after
hardware installation.
Requires installation of keyboard
driver.
Requires driver to enable the
system ACPI (Power
Management) function.
Available immediately after
hardware installation. (**)
Requires installation of keyboard
driver
Requires installation of keyboard
driver.
Windows ME / Windows 2000 /
Windows XP
Available immediately after
hardware installation.
Available immediately after
hardware installation, except “Eject”
function. (*)
Available immediately after
hardware installation
Available immediately after
hardware installation. (**)
Requires installation of keyboard
driver
Requires installation of keyboard
driver
(*): Available immediately after hardware installation completed. With installing the extra driver,
you can redefine each key function into personal likeness.
(**): Available immediately after hardware installation completed. With installing the extra driver,
you can enjoy mouse extra “Quick Jump“ function provided by this driver.
4
Loading...