Behavior Tech Computer KB8280BT User Manual

QQuuiicckk IInnssttaallllaattiioonn GGuuiiddee

Bluetooth Keyboard/8280BT

¾ Keyboard hot keys function

Button Function

Fn+F6
Fn+F7
Fn+F8 Volume Increment
Fn+F10
Fn+F11
Fn+F12 Scan Next Track
Fn+F1 AC Back
Fn+F2 AC Forward
Fn+F3 AC Home
Fn+F4 AC Email

Mute
Volume Decrement

Scan Previous Track
Play/Pause

¾ Package Content

 A Bluetooth Keyboard
 Quick Installation Guide
 Batteries (Two AA alkaline batteries included)
 PE bag

¾ System Requirements

 Desktop/notebook PC must be Bluetooth-enabled

If the desktop/notebook PC is not Bluetooth enabled, a Bluetooth USB dongle will be required.

¾ Hardware Installation

- Battery Installation

1. Push the cover on the bottom of the keyboard release and insert two AA
batteries.

2. To ensure that the batteries are installed correctly, follow the polarity signs in the
battery compartment.

3. Put the cover back on.

- Keyboard Installation

The keyboard will not be functioned in the beginning, and you will need to use an existing keyboard.

1. Turn on your desktop/notebook PC before doing this pairing procedure.

2. Please go to the control panel or system tray to check if your PC is Bluetooth-enabled. If your PC supports
Bluetooth device, you’ll see a Bluetooth icon on the system tray. If not, please plug the compatible
Bluetooth dongle for configuration.

3. Power on your keyboard by switching the power switch to ON, and the blue LED on the top of the
keyboard will flash quickly. During the flashing time, you can do the ID pairing.

4. Press the connect button until the LED indicator on the top of the keyboard flashes slowly. The LED
indicator will keep flashing 2 minutes to make it detectable by the Bluetooth software on your
computer.

5. Then, right click the Bluetooth icon on the system tray and select “Add Bluetooth Device”. The

6. Start detecting the Bluetooth keyboard. And then, select the “Bluetooth Keyboard” in the list of

LED Indicator

“Add Bluetooth Device” dialog box will pop up. Select “My device is set up and ready to be found”
and click “ Next”.

discovered devices.

LED Indicator

Power Switch

ID button

7. Select “ enter a passkey” and click “Next” to continue.