Beglec MINI COLOR 7 TC V1.1 User Manual

11

ABLE OF CONTENTS

T

T

ABLE OF CONTENTS

PART 1 PRODUCT (GENERAL)....................................................1.

1.1--PRODUCT INTRODUCTION.........................................................1.

1.2--PRODUCT FEATURES.................................................................1.

1.3--TECHNICAL SPECIFICATIONS.....................................................2.

1.4--PHOTOMETRIC DATA..................................................................3.

1.5--SAFETY WARNING......................................................................4.

PART 2 INSTALLATION...............................................................5.

2.1--MOUNTING...................................................................................5.

2.2--POWER CONNECTION..................................................................5.

2.3--SETTING UP WITH A DMX512 CONTROLLER.................................6.

2.3-1--DMX512 ADDRESSING WITHOUT ID ADDRESSING......................................6.

2.3-2--DMX512 ADDRESSING WITH ID ADDRESS..................................................6.

PART 3 DISPLAY PANEL OPERATION.........................................8.

3.1--BASIC..........................................................................................8.

3.2--MENU..........................................................................................9.

3.3--STATIC......................................................................................1 0.

3.4--AUTO.........................................................................................10.

3.5--ADDRESS..................................................................................10.

3.6--RUN...........................................................................................10.

3.7--PERSON...................................................................................11.

3.8--ID.............................................................................................. 11.

3.9--FAN........................................................................................... 11.

3.10--EDIT ........................................................................................11.

3.11--SETTINGS ...............................................................................12.

3.12--PASSWORD .............................................................................12.

3.13--SAVE .......................................................................................12.

PART 4 USING A DMX512 CONTROLLER....................................13.

4.1--BASIC ADDRESSING.................................................................13.

4.2--CHANNEL ASSIGNMENT............................................................13.

4.3--BASIC INSTRUCTIONS FOR DMX512 OPERATION (STAGE 1).....16.

PART 5 APPENDIX..................................................................... 17.

5.1--TROUBLE SHOOTING...............................................................17.

5.2--MAINTENANCE........................................................................ 18.

1 PRODUCT (GENERAL)

1.1 PRODUCT INTRODUCTION

This product is designed for indoor use. Suitable applications include
wash or effect lighting for architectural, stage or nightclub applications.
This product can also be installed for use in signage and advertising using
the dynamic functions available with DMX512 control. Direct input of
DMX512 signal allows the units to be controlled from any DMX512
controller. This product can be operated as a single unit or in multiple units
for large applications.

The specially developed controller that allows the product to be controlled
independent of the DMX512 controller enables the user to create and edit a
wide range of custom programs. All programs can be touch-button
displayed or scheduled to START and END at scheduled times. When
programs have been created or edited in the controller, it is also possible to
trigger these programs using the DMX IN function when connected to a
DMX512 controller.

1.2 PRODUCT FEATURES

LED FIXTURE

* RGB Dimmer 0-100%
* Strobe
* Automatic programs
* LCD display
* Display control 'lock-out'
* Direct DMX512 input
* Independant ID address
* Stand-alone/ Slave

1 PRODUCT(GENERAL)

1

2009.12.9

1.3 TECHNICAL SPECIFICATIONS

LED MODULE

1 PRODUCT(GENERAL)

2

2009.12.9

1.4 PHOTOMETRIC DATA

PHOTOMETRIC DATA

1 PRODUCT(GENERAL)

3

2009.12.9

1.5 SAFETY WARNING

IMPORTANT

ALWAYS READ THE USER MANUAL BEFORE OPERATION.

PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE
PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR
AREA.

This product must be installed by a qualified professional.

Always operate the equipment as described in the user manual.

A minimum distance of 0.5m must be maintained between the
equipment and combustible surface.

The product must always be placed in a well ventilated area.

Always make sure that the equipment is installed securely.

DO NOT stand close to the equipment and stare directly into the LED
light source.

Always disconnect the power supply before attempting and
maintenance.

Always make sure that the supporting structure is solid and can
support the combined weight of the products.

The earth wire must always be connected to the ground.

Do not touch the power cables if your hands are wet.

ATTENTION

This product left the place of manufacture in perfect condition.

In order to maintain this condition and for safe operation, the
user must always follow the instructions and safety warnings
described in this user manual.

Avoid shaking or strong impacts to any part of the equipment.

Make sure that all parts of the equipment are kept clean and

free of dust.

Always make sure that the power connections are connected

correct and secure.

If there is any malfunction of the equipment, contact your

distributor immediately.

When transferring the product, it is advisable to use the

original packaging in which the product left the factory.

Shields, lenses or ultraviolet screens shall be changed if they

have become damaged to such an extent that their
effectiveness is impaired.

The lamp (LED) shall be changed if it has become damaged or

thermally deformed.

1 PRODUCT(GENERAL)

4

2009.12.9