Page 1
LD-SPLIT IP68
Version: 1.0
ENGLISH
Installation Manual
Page 2
Specification
Junction box for outdoor applications
IP 68
Dimension: 129 x 91 x 40 mm
Weight: 0.15kg
40
85
91
129
109
115
Installation
The LD-SPLIT IP68 should be placed on a non-flammable
flat surface in any orientation and fixed by the two
screws. There are two mounting holes in the housing.
A
C
D
E
B
Page 3
1. Unscrew all the screws (A), open the
right cover (B) and remove the gasket (C).
2. Connect wires to the PCB board (D) through
the water-proof input glands (E) as shown below.
3. Install the gasket (C) and the cover (B) back
firmly.
Please connect the units with lights as below:
1 2
LD-POWER
1
LD-POWER input
3
Brown
White + Brown
Green
White + Green
Blue
White + Blue
Orange
White + Orange
Brown
White + Brown
Green
White + Green
Blue
White + Blue
Orange
White + Orange
Page 4
2
LED
3
Brown
White + Brown
Green
White + Green
Blue
White + Blue
Orange
White + Orange
Out or Led Fixture
Brown
Brown
White + Brown
Green
White + Green
Blue
White + Blue
Orange
White + Orange
Brown
White + Brown
Green
White + Green
Blue
White + Blue
Orange
White + Orange
White + Brown
Green
White + Green
Blue
White + Blue
Orange
White + Orang
WWW.BRITEQ-LIGHTING.COM
e
Copyright © 2009 by BEGLEC NV
‘t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
Loading...