Beglec BTX 300 SW V1.0 User Manual

DANGER ~ GEVAAR ~ GEFAHR ~ PELIGRO ~ PERIGO

!

WARNING: DANGER! never expose the lens to direct sunlight, even for a short period. This may damage

the light effect or even cause fire!

ATTENTION: DANGER! n'exposez jamais la lentille directement aux rayons de soleil, même pendant un

bref instant. Ceci peut endommager l'intérieur de l'appareil ou même causer un incendie !

OPGELET : GEVAAR ! stel de lens nooit bloot aan direct zonlicht, zelfs gedurende een korte periode. Dit

kan het toestel beschadigen en zelfs brand veroorzaken!

WARNUNG: GEFAHR! Setzen sie die Linse niemals direkter Sonneneinstrahlung aus, auch nicht für eine

kurze Zeit ! Die direkte Sonneneinstrahlung kann das Gerät zerstören oder zum brennen bringen!

ADVERTENCIA: ¡PELIGRO! ¡nunca exponga la lente a la luz solar directa, aún durante un período corto!

¡Esto puede dañar el efecto de luz o incluso causar el fuego!

AVISO: PERIGO! Nunca exponha as lentes directamente à luz solar, mesmo que por pouco tempo! Isto

pode danificar o efeito luminoso ou mesmo provocar um incêndio!

EN - DISPOSAL OF THE DEVICE

Dispose of the unit and used batteries in an environment friendly manner according to your country regulations.

FR - DÉCLASSER L’APPAREIL

Débarrassez-vous de l’appareil et des piles usagées de manière écologique, conformément aux dispositions
légales de votre pays.

NL - VERWIJDEREN VAN HET APPARAAT

Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke manier conform de in uw land geldende
voorschriften.

DU - ENTSORGUNG DES GERÄTS

Entsorgen Sie das Gerät und die Batterien auf umweltfreundliche Art und Weise gemäß den Vorschriften Ihres Landes.

ES - DESHACERSE DEL APARATO

Reciclar el aparato y pilas usadas de forma ecologica conforme a las disposiciones legales de su pais.

PT - COMO DESFAZER-SE DA UNIDADE

Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em conformidade com as normas vigentes no seu país.

1. Safety Instruction

Please read carefully the instruction

manual

, which includes

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.

Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.

 Unpack and check carefully that there is no transportation damage before using the

unit.

 The unit is for indoor use only. Use only in a dry location.
 Do install and operate by qualified operator.
 Do not allow children to operate the fixture.
 Use safety chain when fixing the unit. Handle the unit by carrying its base instead of

head only.

 The unit must be installed in a location with adequate ventilation, at least 50cm from

adjacent surfaces.

 Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.
 Before operating, ensure that the voltage and frequency of power supply match the

power requirements of the unit.

 It’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

 Maximum ambient temperature TA: 40°. Don’t operate it when the temperature is

higher.

 Don’t connect the device to any dimmer pack.
 During initial start-up some smoke or smell may arise. This is a normal process and

does not necessarily mean that the device is defective, and it will decrease gradually
within 15 minutes.

 Make sure there are no flammable materials close to the unit while operating to avoid

fire hazard.

 Examine the power wires carefully, replace them immediately if there is any damage.
 Unit’s surface temperature may reach up to 85°. Don’t touch the housing bare-handed

during its operation, and allow about 15 minutes for cooling the unit down before
replacing bulb or maintenance as it could be very hot.

 Avoid any inflammable liquids, water or metal objects entering the unit. Once it

happens, cut off the mains power immediately.

 Do not operate in dirty or dusty environment, do clean fixtures regularly.
 Do not touch any wire during operation as there might be a hazard of electric shock.
 Avoid power wires together twist other cables.
 The minimum distance between light output and the illuminated surface must be more

than 2.5 meters.

 Disconnect mains power before fuse/lamp replacement or servicing.
 Replace fuse/lamp only with the same type.
 In the event of serious operating problem, stop using the unit immediately.
 Never turn on and off the unit time after time.
 The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

BRITEQ® 1 BTX-300SW

important information about the installation, usage and maintenance.

 Do not open the unit as there are no user serviceable parts inside.
 Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead

to damage or malfunction. Please contact the nearest authorized technical assistance
center if needed.

 Disconnect the mains power if the fixture is has not been used for a long time.
 Do use the original packing materials before transporting it again.

Caution

 To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

 Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
 Do replace the bulb once it is damaged, deformed or life-expired.
 Do not look directly at the light while the bulb is on.
 Never touch bulb with bare fingers, as it is very hot after using.
 Do not start on the unit without bulb enclosure or when housing is damaged.

Product Items

 User manual
 2 x Omega clamps

2. Installation

Unpacking the fixture (for flight case pack only)

1.Stop the flight case via the brake sheet above the wheels.

2.Unlock the lock modules (1) and open the cover board.

3.Prop the cover board with lid bracket.

4.Take out the fixture.

5.Unlock the lock module (2) take out omega clamps.

Installation:

1. Bolt each clamp (1) to the Omega holder with screw and
lock nut through the hole in the holder.

2. Fasten the omega holders (2) on the bottom of the base by
inserting quick-lock fasteners (3) into the holes of the base
and tighten fully clockwise.

3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the
safety cable (6) through the bottom of the base and over the support.

Fig.1 Fig.2

Attention:

 Always ensure that the structure to which you are attaching the unit is secure and is

able to support a weight of 10 times of the unit’s weight without any harming
deformation.

BRITEQ® 2 BTX-300SW

 Make absolute sure that the unit is firmly fixed in way that no vibrating or slipping would

occur during operate.

 The equipment must be installed beyond the areas where persons may walk by or be

seated.

 The rigging has to be operated by or under the guide of the skilled person.

3. Technical Specification

Power supply

- AC 100~240V 50/60Hz

Power Consumption

- 440W (230V)

- 460W (120V)

Fuse

- T 10 A

Lamp

- Philips MSD Gold 300/2 mini FastFit ICT

Battery backup display

- Setting DMX address or other functions without connecting to mains power.

- Battery for LCD display charges automatically when the fixtures connects to the mains
power.

- No need to change battery.
Wireless control (for the unit with wireless receiver built-in only)

- Wirelessly controlled by W-DMX (option).

- Each W-DMX is sending out 512 channels of DMX.

- License free band of 2.45 GHz

Optical system

- High efficiency optical system, delivering extremely powerful output

- High quality dichroic lenses

- Beam angle: 15°~35°

Movement

- Pan: 540°

- Tilt: 270°

- Pan/Tilt moving speed adjustable.

- Automatic Pan/Tilt correction.

- Easy calibration and maintenance by magnetic home positioning.

- Pan/Tilt position lock for transporting protection.

Dimmer/Shutter

- Blackout, 0~100% smooth dimming, independent shutter and various strobe effect.

Color wheel

- Color wheel: 7 dichroic colors + open.

- Rainbow effect in both directions.

- Easy calibration and maintenance by magnetic home positioning.

CMY

- CMY speed adjustable.

- Optional multiple preset colors and macros available.

Gobo wheel

- Gobo size: Ø26.8mm (Ø24mm for image)

- Gobo Wheel 1: 7 rotating, indexable, easily replaceable gobos + open.

- Gobo Wheel 2: 8 metallic gobos + open.

- Easy calibration and maintenance by magnetic home positioning.

- Module design for easy assembly and service.

Prism

- 3 facets prism with rotating effect.

Frost

- Variable, separate effect.

Focus

- Focus effect.

Iris

- Motorized, stepless.

Zoom

- Motorized linear zoom for smooth adjustment of beam size and beam sharpness.

Cool

- Fan cooled

Protocols

- DMX 512

- Date input/output: 3/5 Pin XLR socket

Weight

- 22.8kgs

Dimension

- 447× 369×597 mm

Photometric diagram

BRITEQ® 3 BTX-300SW

BRITEQ® 4 BTX-300SW

DMX Channels





Mode

CH

1 Pan Shutter Pan
2 Pan Fine Dimmer Pan Fine
3 Tilt Cyan Tilt
4 Tilt Fine Magenta Tilt Fine
5 Pan /Tilt Speed Yellow Pan /Tilt Speed
6 Shutter Color Function
7 Dimmer Gobo 1 Pan/Tilt Macro
8 Color R-Gobo 1 Pan/Tilt Macro Speed

9 Cyan R-Gobo 1 Fine Color
10 Magenta Gobo 2 Cyan
11 Yellow Prism Magenta
12 Preset Color R-prism Yellow
13 Gobo 1 Iris Preset Color
14 R-Gobo 1 Focus CMY Speed
15 Gobo 2 Zoom Color Macro
16 Prism Pan Gobo 1
17 R-Prism Pan Fine R-Gobo 1
18 Iris Tilt R-Gobo 1 Fine
19 Frost Tilt Fine Gobo 2
20 Zoom Pan/Tilt Speed Prism
21 Focus Frost R-Prism
22 Function Function R-Prism Fine
23 Frost
24 Iris
25 Zoom
26 Focus
27 Shutter
28 Dimmer
29 Dimmer Fine

Mode 1

22-CH

4. Description

4.1 Description of the fixture

Mode 2

22-CH

1.Arm

2.Front panel

3.head

4.Tilt lock button (Black)

5.Tilt unlock button (Gray)

6.Pan lock

7.Handle

8.Base

9.Antenna (optional)

Mode 3

25-CH

the pan lock/unlock lever (6) is in lock position. To unlock the head, press the tilt unlock
button (5) and move the pan lock/unlock lever (6) to unlock position.

Caution: The head and arm must be unlocked before operation!

4.2 Control Panel

Front view Rear view

,1 Monitor (Batter Back-up display):

○

,2 LED

○

POWER On Power on
DMX On DMX input present

,3 Button

○

MENU To enter into move backward or leave the menu

UP
DOWN

ENTER To perform the desired functions

,4 Antenna (optional)

○

Receive wireless signal from a wide range

,5 DMX input/output:

○

For DMX 512 operation, use 3/5-pin XLR plug cable to link the units together

,6 Power Switch:

○

Turns On/Off the power

,7 Power Cable:

○

To connect to the mains supply

,8 Fuse (T 10 A):

○

Protect the unit from damage of over current.

To go backward to move up in the menu
To go to move down in the menu

The head can be locked for transportation protection-the tilt lock button (4) is pressed and

BRITEQ® 5 BTX-300SW

BRITEQ® 6 BTX-300SW

5. Gobo and Lamp

5.1 Inserting/Exchanging rotating gobos

GOBO WHEEL 1 (replaceable) GOBO WHEEL 2

DANGER!

Install the gobos with the device switched off only.

Unplug from mains before changing gobos!

CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will
otherwise be opened!

Please follow the steps below to insert/change rotating gobos

1. Open the cover by loosening the fastening screws on the cover.

2. Push the gobo plate (follow the direction 1) and gently pull out the plate (follow the
direction 2).

3. Take out the ring with an appropriate tool. Do not touch the surface of the glass gobo.

4. Remove the original gobo and inset a new one (glazy side towards the lamp). Insert the
ring to secure it in the gobo holder.

5. Install the gobo plate back into the gobo wheel. Make sure the gobo plate is installed
under the pressure plate.

5.2 Lamp

MSR/ MSD Gold 300/2 miniFastFit

 Because of its high internal pressure, there might be a risk that the Discharge

lamp would explode during operation. The lamp emits intense UV radiation which
is harmful to the eyes and skin. The high luminance of the arc can cause severe
damage to the retina if you take a close look at the lamp.

 To protect the lamp, always turn off the lamp first (via control panel or DMX

controller) and let the unit run at least five minutes to cool down before switching
off the mains supply. Never handle the lamp or luminaire when it is hot.

 Do not touch the bulb with bare hands. If this happens, clean the lamp with

denatured alcohol and wipe it with a lint free cloth before installation.

 The lamp generates UV radiation. Never operate the lamp without appropriate

shielding.

 When lighting up, the lamp operates at high pressure and there is a slight risk of arc

tube rupture. The risk increases with age, temperature and improper handling of the
lamp. Do not use the lamp longer than its lifespan.

 Make sure the lamp is located in the center of the reflector for the best projection.

Change Lamp

In case of replacement of the lamp or maintenance, do not open the

WARNING

1. Turn off the power.

2. Unscrew the two screws (A), open the lamp cover, turn it to
the position as the sketch shown below.

3. Hold the base of the lamp, anticlockwise turn until it is parallel
to the groove.

4. Inset a new lamp follow the groove, turn it clockwise to fix the
lamp.

5. Tighten the screws (A) to fix the lamp cover.

6. Turn the screws (B) to adjust the lamp position be sure
it is located in the center of the reflector for the best
projection.

fixture within 15 minutes until the unit cools down after switching off.

BRITEQ® 7 BTX-300SW

BRITEQ® 8 BTX-300SW