Beghelli ILLUMINA SCALA, ILLUMINA BS100LED 4FT, ILLUMINA BS100LED 2FT PLUS, ILLUMINA BS100LED 2FT AMBER, ILLUMINA BS100LED 2FT PLUS PG Installation Instructions Manual
...
ILLUMINA FAMILY
BS100LED 4FT; BS100LED 2FT; BS100LED 4FT AMBER; BS100LED 2FT AMBER; SCALA;
BS100LED 2FT PLUS; BS100LED 2FT PLUS PG & BS100LED 4FT PG; BS101LED; BS101LED-ECO
INSTALLATION INSTRUCTIONS
Beghelli Canada
3900 14th Avenue
Markham, Ontario L3R 4R3 Canada
P: (905) 948-9500
F: (905) 948-8673
www.BeghelliCanada.com
Beghelli USA
3250 Corporate Way
Miramar, Florida 33025 USA
P: 800 726 4316 / P: 954 442 6600 F:
954 442 6677
www.BeghelliUSA.com
Beghelli Mexico
Av. Del Marqués No. 70, Int. 4
Parque Industrial Bernardo Quintana
C.P. 76246 El Marqués, Qro.
P: +52 442-221-6439 / F: +52 442-221-6215
www.BeghelliMexico.com
ILLUMINA FAMILY
INSTALLATION INSTRUCTIONS
ILLUMINA FAMILY
BS100LED 4FT; BS100LED 2FT; BS100LED 4FT AMBER;
BS100LED 2FT AMBER; SCALA; BS100LED 2FT PLUS; BS100LED
2FT PLUS PG & BS100LED 4FT PG; BS101LED; BS101LED-ECO
Surface
Mounting
Clip
Flange
Surface
Mounting
Clip
Flange
Mounting
Bracket
BS100 LED
A/C CABLE (AC)
Attach cable glider to surface mounting clip using provided
1.
lock nut as shown.
Snap assembly onto mounting bracket on the housing.
2.
Thread A/C Cable through the cable glider as shown.
3.
Push top sleeve of cable glider to release lock and adjust level.
4.
Housing
A/C Cable
BS100 LED
Cable
Glider
Mounting
Bracket
Lock-Nut
BS101 LED
A/C Cable
Cable
Glider
Surface
Mounting
Clip
Lock-Nut
BS101 LED
CHAIN (CH)
1.
Insert the hook clip through the loop of the chain.
2.
Attach hook clip onto the holes on the top of the
mounting bracket above the housing as shown.
26.0”(BS100 4FT)
18.7” (BS100 2FT)
35.1” (BS101)
BS100 LED
Chain
Clip
Hole for
Clip
Mounting
Bracket
Chain
Clip
Hole for
Clip
Surface
Mounting
Clip
BS101 LED
ILLUMINA FAMILY
JUNCTION MOUNT (JM)
INSTALLATION INSTRUCTIONS
Attach the Mounting Clips to the ceiling as shown.
1.
Do the wire connections to the J-Box.
2.
Snap the fixture onto the Mounting Clips on the wall/ceiling.
3.
MAGNET (MM)
1.
Snap the magnet assembly onto the fixture.
2.
Mount the fixture to the metal surface of the main structure.
3.
Attach the eyelet of the Safety Cable to the main structure
of the building with provided screw & lock nut.
Mounting Clip
Mtg. Hardware
(by others)
Gasket
BS100 LED & BS101 LED
Magnet
Surface
Mounting
Clip
BS100 LED ONLY
NOTE: Magnet mounts must be installed to steel
beam measuring minimum 3/16” (4.7mm) thick.
4” Oct. J-box
(by others)
1/4-20 Screw
Lock-Nut
Safety Cable
12” lg.
PIVOT (PM)
Attach the pivot bracket together as shown.
1.
Attach the assembly to the surface mounting clip as shown.
2.
Mount the assembly to the desire location on wall/ceiling.
3.
Snap the fixture onto the pivot brackets on the wall/ceiling.
4.
PENDANT (SINGLE) (SPK)
Attach Mounting Clips to Single Pendant Mounting Bracket.
1.
Attach Single Pendant Mounting Bracket Assembly to Stem.
2.
Snap fixture onto Mounting Clips on Single Pendant
3.
Mounting Bracket.
Hardware
Washer
Hex Nut
Single Pendant
Socket Head
Screw
BS100 LED
Mtg. Bracket
Power Cord
Bushing
Mounting
Clip
Hex Head
Screw
Pivot
Bracket
Surface
Mounting
Clip
Socket
Head
Screw
Pivot
Bracket
Surface
Mounting
Clip
Washer
Hex Nut
BS101 LED
BS100 LED & BS101 LED
Hardware
(by others)
Hex Head
Screw
Stem
Lock-Nut
ILLUMINA FAMILY
INSTALLATION INSTRUCTIONS
PENDANT (DOUBLE) (DPK)
1.
Attach the stem adaptor cap to the surface mounting clip
using provided lock nut as shown.
2.
Snap the assembly to the mounting bracket on the housing.
3.
Attach stem adaptor & stem to the stem end cap.
QUICK MOUNTING PLATE (QMP)
Attach the Quick Mounting Plate assembly to the J-box &
1.
ceiling as shown.
Do the wire connections to the J-Box.
2.
Snap the fixture onto the Quick Mounting Plate assembly on
3.
the wall/ceiling.
BS100 LED
Quick
Mounting
Plate
Mtg. Hardware
(by others)
Quick Mtg. Plt.
w/Mtg. Clip
Gasket
Stem Stem
Stem Adaptor
Stem Adaptor
Cap
Surface
Mounting
Clip
Lock-Nut
Stem Adaptor
Stem Adaptor
Cap
Surface
Mounting
Clip
Lock-Nut
BS101 LED
4” Oct. J-box
(by others)
BS100 LED & BS101 LED
TRUNION (TM)
1.
Attach the Surface Mounting Clips to Trunion Bracket as
shown.
2.
Attach the Trunion Bracket assembly to the ceiling.
3.
Snap the fixture onto the Surface Mounting Clips.
Aviation Cable
Canopy Assembly
w/ Feed
Aviation Cable
Canopy Assembly
w/ Non Feed
Pendant Canopy
Assembly
(fixed)
Trunion
Bracket
Lock-Nut
Washer
Surface
Mounting
Clip
Screw
Pendant Canopy
Assembly
(Swivel)
Trunion
Bracket
Lock-Nut
Washer
Surface
Mounting
Clip
Screw
BS100 LED BS101 LED
Tab
NOTE: Twist the canopy for
the tab to engage
with slotted hole on
canopy
Slot
Loading...