BeeRaider BR1KENOP Users manual

Products features

·World general 2.4G wireless solution

·Adopt Nordic RF chip.

·10M wireless working distance.

·Ergonomic design.

·Build-in Super Nano USB receiver.

Products installation

· Get wireless keyboard and receiver from package

· Put 2PCS AAA alkaline battery properly in Keyboard.

· Connect the nano receiver with computer USB port

· use your keyboard.

Advanced function

1.Low power indicating function

After a long time using keyboard, The battery voltage will get lower, when lower than the setted low

power indicating, the battery low LED will blink to remind you change new battery.

Notice:Only AAA alkaline battery is acceptable for using

3.Auto sleep function

it will come into the status of sleep automatically without mouse using for 8 minutes,saving more

power.Press any keys for continuing use

Notice: long time no use, please take out the battery, for fear of parts corrosion

4. Build in receiver

Using super Nano receiver,can be connected with PC & Notebook for a long time,no any effects for

computer.

Reconnection

There are different sets of built-in identification number for wireless keyboard data transmitting and

receiving, Easy to use the keyboard when using them one-on-one. High temperature, high magnetic field,

vibration may block this identification code, then need reconnect it and use. Methods as following,

·Pull out and reconnect receiver.

·press down left,down,right arrow key plus with F1 key at the same time for several seconds.

·Lower power led indicator will blink to show the keyboard connected and can be use.

Warning

Without the approval of the authorities to make any change or amendment,we have the right to prohibit

user operating this equipment

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.

NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.