BeefEater BSW316SANG User Manual

Assembly and Operating Instructions

INTEGRATED SIDE BURNER

BSW316SA

FOR OUTDOOR USE ONLY AUSTRALIA / NEW ZEALAND

WARNING

TIPS & INFORMATION

ENVIRONMENTAL TIPS

CONTENTSCONGRATULATIONS

Dear customer,

Congratulations and thank you for choosing our barbecue� We are sure you will find it a pleasure to use� Before you use the barbecue, we recommend that you read through the relevant sections of this manual, which provide a description of your appliance and its functions�

To avoid the risks that are always present when you use an appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards�

We recommend that you keep this instruction booklet for future reference and pass it on to any future owners�

After unpacking the appliance, please check it is not damaged� If in doubt, do not use the appliance but contact your local customer care centre�

This appliance complies with requirements of Australian Standards AS4557�

CONDITIONS OF USE

These important notes apply to your appliance

• This appliance MUST be installed and serviced only by a qualified licensed person�

• This product is intended for personal, domestic or household use only, not commercial use�

• This product is intended for outdoor use only�

• This product must be installed, operated and maintained as per the instructions�

• Ventilation holes in the unit must not be obscured by the installation�

Please ensure you read the instruction manual fully before you call for service, or a full service fee could be applicable.

General warnings ��3 Product description ��4 Gas specifications ��6 Gas connection detail ��6 Natural gas installation��7 Leak test procedure ��7 Universal LPG installation ��8 Gas bottle safety ��9 Installation warnings ��10 Installation instructions ��11 Dimensions ��12 Gas requirements ��13 Positioning of burner ��13 Connecting to the integrated barbecue ��14 Burner operation ��15 Pivoting safety leg ��15 Cleaning and care ��16 Troubleshooting ��17 Accessories ��17 Notes ��18 Warranty ��21

Please read the user manual carefully and store in a handy place for later reference�

The symbols you will see in this booklet have these meanings:

WARNING

This symbol indicates information concerning your personal safety.

CAUTION

This symbol indicates information on how to avoid damaging the appliance.

Record model and serial number here:

Model number: ��

Serial number: ��

PNC: ��

2 CONTENTS

IMPORTANT

This symbol indicates tips and information about use of the appliance.

ENVIRONMENT

This symbol indicates tips and information about economical and ecological use of the appliance.

TIPS & INFORMATION

ENVIRONMENTAL TIPS

WARNING

IMPORTANT SAFETY INSTRUCTIONS

Please read the user manual carefully and store in a handy place for later reference�

IMPORTANT

Important – check for any damages or marks If you find the barbecue is damaged or marked, you must

report it within 7 days if you wish to claim for damage/ marks under the manufacturer’s warranty. This does not affect your statutory rights.

ENVIRONMENT

Information on disposal for users

• Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.

• If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

WARNING

This appliance must be serviced only by a qualified licensed person.

Improper installation, adjustment, alteration or maintenance can cause injury or property damage.

Please contact your nearest Electrolux Service Department for additional information or assistance for an approved installer.

NOTE: This manual must remain with the owner for future reference�

WARNING

• Do not lean over barbecue when lighting.

• Do not leave the barbecue unattended when alight.

• Do not delay lighting once the gas has been turned on.

• Do not store or use aerosol cans in the vicinity of the barbecue.

• Do not store flammable liquids in the vicinity of the barbecue.

• Do not use caustic or abrasive based cleaners on the barbecue.

• Do not attempt to dismantle or adjust the control valves.

• Do not attempt to dismantle or adjust the regulator.

• Do not test for leaks with a naked flame.

• Do not modify the construction of this appliance or modify the injector orifice size.

• Do not obstruct any ventilation of the barbecue.

• Do not allow children to operate or play near the barbecue.

CAUTION

This barbecue is supplied set up for Natural Gas and is labelled accordingly. A Universal LPG conversion kit is included if required. Conversion of this unit to Universal LPG must be carried out by a qualified licensed person and a Certificate of Compliance must be issued to the owner at the completion of the installation and conversion.

3SAFETY

PRODUCT DESCRIPTION

Integrated burner

Slimline lid

Gas connection point

4 PRODUCT DESCRIPTION

PRODUCT DESCRIPTION

Pivoting lid safety leg

Lid mounting bracket

Trivet

Burner

Burner control

Reversible cast grill plate

5PRODUCT DESCRIPTION

GAS SPECIFICATIONS

GAS TYPE

Maximum gas

NATURAL GAS

UNIVERSAL LPG

22 MJ/h 23 MJ/h

consumption

Injector office

2�10mm 1�25mm

diameter

Number of

1 1

injectors

Regulator

1�00 kPa 2�75 kPa

pressure

NOTES:

• This appliance MUST be installed and serviced only by a qualified licensed person�

• This product is intended for outdoor use only�

• This product must be installed as per the instructions which requires the installation of venting to enable the barbecue to operate correctly� Failure to provide adequate ventilation for supply of air to the appliance may result in poor burner performance or excessive heat build-up within the mounting enclosure�

• Ventilation holes in the unit must not be obscured by the installation�

170

112

GAS SPECIFICATIONS

NATURAL GAS INSTALLATION LEAK TEST PROCEDURE

This barbecue is supplied set up for Natural gas and is labelled accordingly� A Universal LPG conversion kit is supplied if required� Refer to Universal LPG installation for details�

Connecting the appliance to an NG gas supply

Components supplied in a bag for NG are:

• Natural gas regulator

• Natural gas installation pipe

• 2 x fibre washers

Preparing the unit for Natural Gas connection to mains

Natural gas connection to be made by a licensed gas fitter�

Preparing the unit for Natural Gas installation

Fit natural gas installation pipe to the gas inlet to enable access to the regulator in the installed position� When tightening the regulator or any other connection do not over-tighten�

1� Fitting the natural gas installation pipe�

Fit pipe ensuring the blue fibre washer is in place� Do not over-tighten�

2� Fitting the regulator�

Fit the regulator ensuring the blue fibre washer is in place and the arrow indicating the gas flow is correct� Do not over-tighten�

3� Connect to consumer piping�

- The NG regulator inlet has a 1/2” parallel pipe thread�

- The inlet of the NG regulator may be connected to

consumer piping using a suitable hose assembly if required�

• Ensure gas valve is in the ‘OFF’ position�

• In a small container, mix a solution of water and detergent or soap�

• After connection of the hose, turn on the gas supply at the gas bottle or mains as appropriate�

• Using a brush apply the solution to the gas connection points and look for bubbles forming�

• Bubbling will indicate a leak�

• Turn off the gas supply and re-tighten the joint� Repeat the leak test�

• If the leak persists, turn off the gas at the isolation valves and contact a licensed gas fitter to correct�

Leak test point

Check hose for signs of abrasion, cracks or leaks

Gas inlet pipe

Fibre washer

NG installation pipe

Fibre washer

NG regulator (ensure arrow is in correct direction)

Consumer piping

7NATURAL GAS INSTALLATION

+ 15 hidden pages

BeefEater BSW316SANG User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual