BeefEater BSH158SA User Manual

Assembly and Operating Instructions
INTEGRATED SERIES
BSH158SA, BSL158SA
AUSTRALIA / NEW ZEALAND
WARNING
WARNING
TIPS & INFORMATION
ENVIRONMENTAL TIPS
CONTENTSCONGRATULATIONS
Dear customer,
Congratulations and thank you for choosing our barbecue� We are sure you will find it a pleasure to use� Before you use the barbecue, we recommend that you read through the relevant sections of this manual, which provide a description of your appliance and its functions�
To avoid the risks that are always present when you use an appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards�
We recommend that you keep this instruction booklet for future reference and pass it on to any future owners�
After unpacking the appliance, please check it is not damaged� If in doubt, do not use the appliance but contact your local customer care centre�
This appliance complies with requirements of Australian Standards AS4563�
CONDITIONS OF USE
These important notes apply to your appliance, failure to adhere to these conditions of use may affect your ability to make a claim under the manufacture’s warranty.
• This appliance MUST be installed and serviced only by a qualified licensed person�
• This product is intended for installation and use at a domestic residence only� This product is not intended for commercial use�
• This product is not suitable for installation or use in marine craft, caravans or recreational vehicles�
• This product must be installed in accordance with these instructions, the requirements of AS/NZS 5601�1 and in accordance with local authority�
• This product must be installed, operated and maintained as per the instructions�
• Ventilation holes in the unit must not be obscured by the installation�
Please ensure you read the instruction manual fully before you call for service, or a full service fee could be applicable.
Record model and serial number here:
General warnings ��������������������������������������������������������������������������3 Integrated barbecue product description �������������������������������������4 Parts �����������������������������������������������������������������������������������������������5 Gas specifications ��������������������������������������������������������������������������6 Leak test procedure ����������������������������������������������������������������������7 Universal LPG and propane installation ���������������������������������������8 Installation warnings �������������������������������������������������������������������10 Installation instructions ��������������������������������������������������������������11 Dimensions ����������������������������������������������������������������������������������13 Gas requirements ������������������������������������������������������������������������14 Assembling the barbecue �����������������������������������������������������������14 Hotplate configuration ����������������������������������������������������������������15 Operating instructions ����������������������������������������������������������������16 Lid safety lid – slimline lid only ���������������������������������������������������17 Cleaning and care ������������������������������������������������������������������������17 Maintenance ��������������������������������������������������������������������������������19 Troubleshooting ���������������������������������������������������������������������������20 Accessories ����������������������������������������������������������������������������������20 Notes ��������������������������������������������������������������������������������������������21 Warranty ��������������������������������������������������������������������������������������23
The symbols you will see in this booklet have these meanings:
WARNING
This symbol indicates information concerning your personal safety.
CAUTION
This symbol indicates information on how to avoid damaging the appliance.
IMPORTANT
This symbol indicates tips and information about use of the appliance.
ENVIRONMENT
This symbol indicates tips and information about economical and ecological use of the appliance.
Model number: �������������������������������������������������������������������������������
Serial number: ��������������������������������������������������������������������������������
PNC: ������������������������������������������������������������������������������������������������
2 CONTENTS
TIPS & INFORMATION
ENVIRONMENTAL TIPS
WARNING
TIPS & INFORMATION
WARNING
WARNING
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT
Important – check for any damages or marks. If you find the barbecue is damaged or marked, you must
report it within 7 days if you wish to claim for damage/ marks under the manufacturer’s warranty. This does not affect your statutory rights.
ENVIRONMENT
Information on disposal for users
• Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
WARNING
This appliance must be serviced only by a qualified licensed person.
Improper installation, adjustment, alteration or maintenance can cause injury or property damage and may affect your ability to claim under the manufacturer’s warranty.
Please contact your nearest Electrolux Service Department for additional information or assistance for an approved installer.
NOTE: This manual must remain with the owner for future reference�
WARNING
• Do not lean over barbecue when lighting.
• Do not leave the barbecue unattended when alight.
• Do not delay lighting once the gas has been turned on.
• Do not store or use aerosol cans in the vicinity of the barbecue.
• Do not store flammable liquids in the vicinity of the barbecue.
• Do not use caustic or abrasive based cleaners on the barbecue.
• Do not attempt to dismantle or adjust the control valves.
• Do not attempt to dismantle or adjust the regulator.
• Do not test for leaks with a naked flame.
• Do not modify the construction of this appliance or modify the injector orifice size.
• Do not obstruct any ventilation of the barbecue.
• Do not allow children to operate or play near the barbecue.
Failure to adhere to the above warnings may cause injury or property damage and affect your ability to make a claim under the manafacturer’s warranty.
CAUTION
This barbecue is supplied set up for Natural Gas and is labelled accordingly. A Universal LPG and propane conversion kit is included if required. Conversion of this unit to Universal LPG or propane must be carried out by a qualified licensed person and a Certificate of Compliance must be issued to the owner at the completion of the installation and conversion.
IMPORTANT
Flame Failure - Auto Shut Off Safety System
Operating Instructions
For added gas safety, your barbecue is fitted with Flame Failure Technology� This safety system will shut off the gas supply to an individual burners if the flame goes out for any reason�
How It Works
Flame Failure Technology switches gas off to an individual burner if the flame goes out� During normal operation the burner flame is in contact with the sensor probe� If the flame is blown out by a strong breeze for example, the control valve will shut off the gas supply to the burner to avoid a continuous gas leak�
3SAFETY
PRODUCT DESCRIPTION
Integrated barbecue with slimline lid BSL158SA
1
Pivotting leg
2
Slimline lid
3
Battery cover
4
Gas connection point
5
Burner controls
6
Cast Iron Grill
7
Cast Iron Hotplate
8
Removable oil reservoir located at front of
cooking surface (not illustrated)
2
1
7
6
3
9
Flame tamers x 2 located under grills
(not illustrated)
Integrated barbecue with roasting hood BSH158SA
10
Roasting hood
11
Warming racks
12
Battery cover
13
Gas connection point
14
Burner controls
15
Cast Iron Grill
16
Cast Iron Hotplate
17
Removable oil reservoir located at front of
cooking surface (not illustrated)
18
Flame tamers x 2 located under grills
(not illustrated)
4
5
10
11 16
15
12
13
14
4 PRODUCT DESCRIPTION
PARTS
DESCRIPTION QTY
Rear heat
1
shield
Flame
2
tamers
Oil reservoirs
Cast Iron
2
1
plate
DESCRIPTION QTY
Natural gas regulator and installation pipe
Universal LPG hose and regulator assembly
1 Plastic bag, containing this instruction book, labels, 1 fibre washer, match holder and chain
EITHER
Roasting hood and base assembly
1
1
1
Cast iron grill
2
Slimline lid
1
and base assembly
5PARTS
GAS SPECIFICATIONS
GAS TYPE
Maximum gas
NATURAL GAS
67�2 MJ/h 64�0 MJ/h 71�0 MJ/h
UNIVERSAL LPG
PROPANE
consumption
Injector office
1�75mm 0�90mm 0�95mm
diameter
Number of
6 6 6
injectors
Regulator
1�00 kPa 2�75 kPa 2�75 kPa
pressure
NOTES:
• This appliance MUST be installed and serviced only by a qualified licensed person�
This product must be installed as per the instructions which requires the installation of venting to enable the barbecue to operate correctly� Failure to provide adequate ventilation for supply of air to the appliance may result in poor burner performance or excessive heat build-up within the mounting enclosure�
Ventilation holes in the unit must not be obscured by the installation�
Failure to adhere to these installation instructions may affect your ability to make a claim under the manufacturer’s warranty�
Natural gas installation
This barbecue is set up for Natural Gas and is labelled accordingly� A Universal LPG and Propane conversion kit is included if required�
Connecting the appliance to an NG gas supply
Componets supplied in a bag for NG are:
• 1 x Natural gas regulator
• Natural gas installation pipe
• 2 x sealing washers
1� Fitting the Natural Gas installation
• Fit the pipe ensuring the blue sealing washer is in place� Do not over-tighten�
2� Fitting the regulator
• Fit the regulator ensuring the blue sealing washer is in place and the arrow indicating gas flow is correct� Do not over-tighten�
3� Fit the hose
• Connect to consumer piping
- The NG regulator inlet has a 1/2” parallel pipe thread�
- The inlet of the NG regulator may be connected to
consumer piping using a suitable hose assembly if required�
46mm
408mm
137mm
Barbecue gas inlet
Sealing washer
Natural Gas installation pipe
Sealing washer
Regulator – ensure arrow is pointing in the right direction
Consumer piping
Preparing the unit for Natural Gas connection to mains
Natural gas connection to be made by a licenced gas fitter�
6
GAS SPECIFICATIONS
LEAK TEST PROCEDURE
Leak test procedure
• Ensure all gas valves are in the ‘OFF’ position�
• In a small container, mix a solution of water and detergent or soap�
• After connection of the hose, turn on the gas supply at the gas bottle or mains as appropriate�
• Using a brush apply the solution to the gas connection points and look for bubbles forming�
• Bubbling will indicate a leak�
• Turn off the gas supply and re-tighten the joint� Repeat the leak test�
• If the leak persists, turn off the gas at the isolation valves and contact a licensed gas fitter to correct�
Leak test points
Check hose for signs of abrasions, cracks or leaks
7LEAK TEST PROCEDURE
UNIVERSAL LPG AND PROPANE INSTALLATION
NOTE: Conversion of this unit to Universal LPG or Propane must be carried out by a qualified licensed person and a Certificate of Compliance must be issued to the owner on completion of the installation and conversion� Conversion of the barbecue by unlicenced persons may result in improper functioning of the appliance, injury, property damage and may affect your ability to make a claim under under the manafacturer’s warranty�
Converting the unit to Universal LPG or Propane gas
Remove burner to access injector
This barbecue is set up for Natural gas and is labelled accordingly� A Universal LPG and Propane conversion Kit is supplied with the product�
The components in the kit are:
• Brass adaptor
• Sealing washer
• Small plastic bag containing:
– 6 x 0�9 brass injectors (Universal LPG)
• Small plastic bag containing:
– 6 x 0�95 brass injectors (Propane)
• Universal LPG sticker
• Propane sticker
1. Replace ‘gas type’ sticker
• Locate ‘Natural gas’ sticker located on the barbecue gas inlet and remove it� Put either the Universal LPG or propane sticker in it’s place�
2. Change the injectors
• Remove spark electrode and thermocouple from the burner�
• Unscrew Natural gas injectors and replace with either Universal LPG or Propane injectors� Universal LPG injectors have 0�90mm diameter orifice� Propane Gas injectors have 0�95mm diameter orifice� All injectors are marked with the orifice size�
Remove 1�75mm injector and install 0�90mm injector for Universal LPG gas or 0�95mm for Propane gas�
• Install burner and re-attach the spark electrode and thermocouple�
• Repeat for the other 5 burners
NOTE: The final step in the conversion of the barbecue to either Universal LPG or Propane is the adjustment of the turndown setting�
This can only be completed after the barbecue has been connected to a supply of gas� Refer to ‘Connection to Universal LPG and Propane Gas Supply’ detailed in next section�
3. Adjust the turndown setting on the valve
• Light each burner and rotate the control knob to the lowest setting, then remove the knob from the valve shaft, and remove the grommet�
• Using a small flat-blade screwdriver adjust the turndown adjustment screw to achieve a small steady flame on the burner�
Turndown screw
• Release the burner from the retaining bracket by lifting as shown�
• Replace the knob
• Recheck the operation of the burner at maximum and turndown
• Repeat procedures for all valves�
8
UNIVERSAL LPG AND PROPANE INSTALLATION
Loading...
+ 16 hidden pages