BeefEater BS26410 Specifications Sheet

Assembly and Operating Instructions

SIDE BURNER

BS26010, BS26410

AUSTRALIA / NEW ZEALAND

TIPS & INFORMATION

ENVIRONMENTAL TIPS

WARNING

WARNING

WARNING

IMPORTANT SAFETY INSTRUCTIONSCONTENTSCONGRATULATIONS

WARNING

WARNING

TIPS & INFORMATION

ENVIRONMENTAL TIPS

Dear customer,

Congratulations and thank you for choosing our appliance.
We are sure you will find it a pleasure to use. Before you use
the appliance, we recommend that you read through the
relevant sections of this manual, which provide a description
of your appliance and its functions.

To avoid the risks that are always present when you use
an appliance, it is important that the appliance is installed
correctly and that you read the safety instructions carefully to
avoid misuse and hazards.

We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.

After unpacking the appliance, please check it is not
damaged. If in doubt, do not use the appliance but contact
your local customer care centre.

This appliance complies with requirements of Australian
Standards AS4563.

CONDITIONS OF USE

These important notes apply to your appliance, failure to
adhere to these conditions of use may affect your ability to
make a claim under the manufacture’s warranty.

• This appliance MUST be installed and serviced only by a
qualified licensed person.

• This product is intended for installation and use at a
domestic residence only. This product is not intended for
commercial use.

• This product is not suitable for installation or use in
marine craft, caravans or recreational vehicles.

• This product must be installed in accordance with these
instructions, the requirements of AS/NZS 5601.1 and in
accordance with local authority.

• This product must be installed, operated and maintained
as per the instructions.

• Ventilation holes in the unit must not be obscured by the
installation.

Please ensure you read the instruction manual fully
before you call for service, or a full service fee could
be applicable.

Important safety instructions .......................................................3

Assembly .......................................................................................4

Operating instructions ................................................................ 6

Care and maintenance .................................................................7

Location ........................................................................................9

Otdoor installation ........................................................................9

Warranty .....................................................................................11

Please read the user manual carefully and store in a handy
place for later reference.

The symbols you will see in this booklet have these
meanings:

WARNING

This symbol indicates information concerning your
personal safety.

CAUTION

This symbol indicates information on how to avoid
damaging the appliance.

IMPORTANT

This symbol indicates tips and information about use
of the appliance.

ENVIRONMENT

This symbol indicates tips and information about
economical and ecological use of the appliance.

Please read the user manual carefully and store in a handy
place for later reference.

IMPORTANT

Important – check for any damages or marks

If you find the appliance is damaged or marked, you must
report it within 7 days if you wish to claim for damage/
marks under the manufacturer’s warranty. This does not
affect your statutory rights.

ENVIRONMENT

Information on disposal for users

• Most of the packing materials are recyclable. Please
dispose of those materials through your local recycling
depot or by placing them in appropriate collection
containers.

• If you wish to discard this product, please contact
your local authorities and ask for the correct method
of disposal.

WARNING

This appliance must be serviced only by a qualified
licensed person.

Improper installation, adjustment, alteration or
maintenance can cause injury or property damage.

Please contact your nearest Electrolux Service
Department for additional information or assistance
for an approved installer.

NOTE: This manual must remain with the owner for
future reference.

WARNING

• Do not lean over appliance when lighting.

• Do not leave the appliance unattended when alight.

• Do not delay lighting once the gas has been turned on.

• Do not store or use aerosol cans in the vicinity of the
appliance.

• Do not store flammable liquids in the vicinity of the
appliance.

• Do not use caustic or abrasive based cleaners on the
appliance.

• Do not attempt to dismantle or adjust the control
valves.

• Do not attempt to dismantle or adjust the regulator.

• Do not test for leaks with a naked flame.

• Do not modify the construction of this appliance or
modify the injector orifice size.

• Do not obstruct any ventilation of the appliance.

• Do not allow children to operate or play near the
appliance.

CAUTION

This appliance is supplied set up for Natural Gas and is
labelled accordingly. A Universal LPG conversion kit is
included if required. Conversion of this unit to Universal
LPG must be carried out by a qualified licensed person and
a Certificate of Compliance must be issued to the owner at
the completion of the installation and conversion.

Record model and serial number here:

Model number: ...............................................................................

Serial number: ................................................................................

PNC: ................................................................................................

2 3CONTENTS SAFETY

ASSEMBLY AND GAS CONNECTION INSTRUCTIONS

ASSEMBLY AND GAS CONNECTION INSTRUCTIONS

GAS AUTHORITY FOR CONF IRMATION OF GAS

TY FIEP DNI OU TB

NATURAL

GAS

REFER TO LOCAL

GAS AUTHORITY FOR CONF IRMATION OF GAS

TY TBUODNIFIEP

LPG

PROPANE

REFER TO LOCAL

GAS

Assembly

Attach your side burner to your barbecue trolley as explained
in the separate barbecue/trolley instructions.

Attach The Trivet

Place the trivet on the body of the side burner. The small
notches underneath the trivet should sit neatly in the holes
in the steel, as shown.

Connection to Barbecue

Ensure all gas controls on the barbecue and side burner are
set to OFF.

Take the connector hose that came with the side burner.
Connect one end to the inlet of the barbecue. Connect the
other end to the left side gas connection point of the
side burner.

If your barbecue came with a cabinet trolley/ cart, your
connector hose should already be attached to the barbecue
inlet (as indicated by the separate cart instructions). In this
case, simply pass the free end of the hose through the hose
access hole in the side of the cart prior to connecting to the
side burner inlet.

connector hose

side burner gas
connection

Replace The Drip Plate

Push the rear drip plate tabs back into the slots at the back
of the side burner body, and secure the front of the drip plate
with the screw removed earlier.

Secure All Joints And Leak Test

The gas leak testing procedure should be conducted every
time a gas cylinder is refilled and reconnected to the
appliance, or after any new gas connection is made. Never
use a naked flame to check for gas leaks.

Temporarily Remove The Drip Plate

In order to properly connect the hoses to the side burner, you
may find it easier to remove the drip plate from underneath
the side burner.

Simply undo the screw at the front of the side burner as
shown, and then ease the rear drip plate tabs from the side
burner body.

You now have clear access to the side burner inlets.

Connection To Gas Supply

Ensure all gas controls on the barbecue and side burner are
set to OFF.

Attach the gas supply hose to the right side inlet of the
side burner.

If the gas supply hose is not already attached to the gas
supply, then attach it now.

If your barbecue came with a cabinet trolley/cart, your gas
supply hose may already be attached to a portable gas
cylinder located inside the cabinet. In this case, simply pass
the free end of the hose through the hose access hole in the
side of the cart prior to connecting to the side burner inlet.

Using two spanners, tighten all gas connections. Do not
overtighten.

LPG gas
supply hose

In a small container, mix up a solution of water and
detergent or soap. Mix the solution well.

Make sure that the gas supply valve on the gas cylinder or
the shut off valve on the supply line is turned on. Make sure
that the gas control valves on the appliance are all turned off.

Using a brush or spray bottle apply the solution to the gas
line and each joint in the gas line, including the hose and
regulator.

Bubbling of the solution will indicate that there is a leak
present. Re-tighten or re-seal any joints that are leaking.

If a leak persists contact your distributor for assistance.

hose
access
hole

4 5

5ASSEMBLY AND GAS CONNECTION4 ASSEMBLY AND GAS CONNECTION