BeefEater BD23117 User Manual

Assembly and Operating Instructions

DISCOVERY
1100 SERIES
TRIM KIT

1100S, 1100E, 1100

3, 4 OR 5 BUILT IN BURNERS

FOR OUTDOOR USE ONLY

AUSTRALIA / NEW ZEALAND

Contents

QTY DESCRIPTION QTY DESCRIPTION

1 Front Cover 10 M6 x 12mm Screws

1+1 RH Bracket + LH Bracket 10 M6 Fiber Washers

1 Back Cover

Instructions

NOTE: the full Barbecue assembly instructions can be found
in the Barbecue Carton. These instructions only refer to
placement of Trims in Built-In situations.

1) Attach the RH Bracket and LH Bracket to Barbecue
body using 8 off M6 x 12mm screws as follows:

NOTE: Washers are to be placed between the Barbecue
body and the bracket.

2) Place BBQ into its position in the bench, resting on the
brackets installed in (1).

3) Attach the rear trim to place:

4) The front cover can be removed for accessing the Fat-

Collecting Pan and replaced:

© 2017 Electrolux Home Products Pty Ltd.
ABN 51 004 762 341
BMAN_DisTrimKit_Jul17

AUSTRALIA
phone: [phone]
fax: [phone]
email: [e-mail]
web: beefeaterbbq.com

NEW ZEALAND
phone: [phone]
fax: [phone]
email: [e-mail]
web: beefeaterbbq.com