PRODUCT
MANUFACTURER
BEECH OVENS
MODEL NUMBER
RND0900
PRODUCT DESCRIPTION
Round Stone Hearth Oven – Wood/Gas fired.
Ext Diameter: |
|
Int Diameter: |
|
Height: |
Ø1250mm. |
|
900mm. |
|
1730mm. |
MANUFACTURED IN AUSTRALIA
www.beechovens.com
|
|
|
SPECIFICATIONS |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
Purpose |
Wood/Gas Fired stone hearth oven for cooking Pizza and other dishes. |
||
|
|
|
|
||
|
|
|
High grade castable ceramic encased in 5mm steel housing supplied in 2 major sections with |
||
|
|
Construction |
removable legs. 50mm insulation covers oven body, 25mm air gap between insulation and non- |
||
|
|
combustible façade material. 75mm stone hearth floor above 25mm insulating board and 5mm |
|||
|
|
|
|||
|
|
|
plate. |
||
|
|
|
|
||
|
|
Firing Type |
Wood, Gas or Gas Back-up (Wood and Gas) |
||
|
|
|
|
||
|
|
Gas |
Gas Back-up - 80Mj NAT / 60Mj LPG (Tube Burner) |
||
|
|
Full Gas – 70Mj Nat / 60Mj LPG (Display Burner) |
|||
|
|
|
|||
|
|
|
|
|
|
|
|
Exhaust |
Under Canopy/Hood OR Beech Spray Filter (Wet Scrubber) OR Flue Transition. |
||
|
|
Requirements |
|||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
Gas Connection – 19mm (3/4”) line. |
||
|
|
|
Electrical – 220-240VAC @ 50Hz 1 Phase 10 AMP |
||
|
|
|
Spray Filter Water Inlet– 15mm @ 30 L/Hr. |
||
|
|
MEP Ratings |
Spray Filter Water Outlet – 40mm Copper Drain – To drain via tundish visible to operator. |
||
|
|
Spray Filter Water Solenoid – 220-240VAC @ 50Hz 1 Phase 10AMP (Linked to exhaust fan – Fan |
|||
|
|
|
|||
|
|
|
ON = Solenoid ON) |
||
|
|
|
Spray Filter Exhaust Ratings – 300mm x 300mm connection, 130Pa Static Pressure, 700l/sec |
||
|
|
|
Spray Filter Cool air Make-up unit – Ensure a fresh air supply is available. No connection required. |
||
|
|
|
|
||
|
|
Capacity |
Cooks approximately 25 x 300mm pizzas per hour. |
||
|
|
|
|
||
|
|
|
Pizza Tools (Pizza Peel, Spigot Brush, Brass Floor Brush, Bubble Hook, SS Rake and Shovel) |
||
|
|
Accessories |
Stainless Steel Hearth (Optional – shown in image) |
||
|
|
|
Spray Filter (Optional – shown in image) |
||
|
|
|
|
||
|
|
|
Oven and associated systems are CE and UL compliant. |
||
|
|
Safety |
UL Tested to Subject 2162 (Wood/Gas Fired). Complies to USA “ANSI-NSF standard 4” |
||
|
|
Exterior temperatures below 50°C. |
|||
|
|
|
|||
|
|
|
Compliant Gas systems with flame failure device. |
||
|
|
|
|
||
|
|
|
Façade and Oven surround to be made of non-combustible material. |
||
|
|
|
Tube Burner Vent to be connected via ventilation panel in front façade panel below oven door (See |
||
|
|
Special |
Installation and Operation Manual for details) |
||
|
|
Requirements |
Access and ventilation panel to both above and below oven - minimum 600mm x 600mm |
||
|
|
|
Metal infill required between oven spigot and façade to prevent hot air and flames entering the |
||
|
|
|
façade cavity. |
||
|
|
|
|
|
|
Loading...