BEDJET 6002NA2 User Manual

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 1

Bed Climate Comfort System

with Remote Control & Bluetooth App

This device is for residential home use only. It is not intended to be

used in commercial, industrial, or human medical settings.

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,

INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL

SAFETYINFORMATION. FAILURE TO COMPLY WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR

PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

SAVE THESE INSTRUCTIONS

®

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 2

Letter from the President:

Thank you for your purchase of the BedJet. We wanted you to know who we are. Our company is not a
division of a massive multinational consumer appliance company or funded by big corporate capital.

We are a true American start-up company based in Rhode Island, full of bright eyed inventors, engineers
and gadget nerds who are part of the community of Makers. We simply love creating and sharing
awesome new technology and our company was fully self-funded out of our own pockets as well as
contributions from our very first customers.

We come from diverse technical backgrounds in the Aerospace, Medical Device, Automotive and Defense
industries. My own technical background came out of being an engineer on the NASA space suit program,
responsible for some of the cooling and heating and climate control life support components. Our goal is
cross-pollination of technologies out of these technologically sophisticated industries into the Bedroom
and the creation of devices which are delightful, therapeutic and luxurious.

Along the way we believe it is also possible to build a profitable company while doing right by our
customers and showing them love and appreciation. We want to be a company that deals with each of
our customers as if they were our neighbors. We also understand that the BedJet is a luxury product and
that there are many in the world who cannot afford such luxuries. In recognition of that, a portion of the
proceeds from every BedJet goes to charities for the less fortunate, who do not have the benefit of
enjoying such products themselves.

We ask that you please give us the opportunity to right any issues you may experience with our product
and we promise to put your needs and interests first. If you love your BedJet, please do spread the word
for us among your friends and family, as we do not have the marketing budgets of the big consumer
appliance companies.

Finally, in support of my personal commitment to your satisfaction, I offer you my own contact
information. If our BedJet team or Customer Care associates fail to meet your expectations in any way,
please don’t hesitate to reach out to me directly. You have my personal commitment to set things right.

With the deepest regard and appreciation for you, our customer,

Mark Aramli
President & Chief BedJetter

Office of the President:

[e-mail]

+1.401.404.5250 ext. 102

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 3

IMPORTANT INSTRUCTIONS

DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE AND PERSONAL INJURY, THIS
PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS

1. Read all instructions before using this device.

2. WARNING – Do not use this heated bed system with any other heated – blanket, comforter,
quilt, sheet, mattress pad, mattress, foot warmer, throw bla nket or similar heated bedding.

3. Let power cord hang free – Do not place between mattress and foundation. Do not allow the
cord to be pinched.

4. Use this device only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electrical shock, or injury to persons.

5. Do not operate device unattended. Turn off or unplug when not in use.

6. DO NOT OPERATE MORE THAN ONE BEDJET ON SAME BEDROOM AC-POWER CIRCUIT

WITHOUT ADJUSTING DUAL MODE SWITCH LOCATED ON REAR OF DEVICE TO “DUAL ZONE
ON, LOW POWER” FOR REDUCED POWER, OR DEVICES MAY EXCEED CIRCUIT BREAKER
CAPACITY AND CAUSE POWER DISTRUPTION OR ELECTRICAL HAZARD.

7. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.

WARNING

 DO NOT place body parts directly into or in front of the air nozzle exhaust

when used on high heat setting

 WARNING – DO NOT use this heated bed system with an infant, a disabled

person, a person with diminished capacity or anyone insensitive to heat,
such as a person with very poor blood circulation

 DO NOT use with children or persons with mental or sensory handicaps or

who cannot understand these warnings

 DO NOT use for medical, oxygen, or wet environments

 DO NOT cover

PERSONAL INJURY COULD OCCUR

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 4

8. Always plug this device directly into a wall outlet/receptacle. Never use with an extension
cord or relocatable power tap (outlet/power strip).

9. Do not operate this device with a damaged cord or plug or after the device malfunctions or
has been dropped or damaged in any manner. Return device to authorized service facility for
examination, electrical or mechanical adjustment or repair.

10. To disconnect device, make sure device is not currently operating in heat or cool mode, turn
Power Switch to OFF, then remove plug from outlet.

11. Always unplug device when not in regular use. Unplug power cord before servicing or moving
the device.

12. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as
it may cause an electric shock, fire, or damage the device. Do not block or tamper with the
device in any manner while it is in operation.

13. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not place
unit on soft surfaces, like a bed, where openings may become blocked.

14. This device has hot and arcing or sparking parts inside. Do not use the BedJet in areas where
gasoline, paint, or flammable liquids are used or stored. It must NOT be used in potentially
dangerous locations such as flammable, explosive, chemical -laden or wet atmospheres. This
device is intended for residential bedroom use ONLY.

15. This device is not intended for use in wet or damp locations. This device is NOT INTENDED for
use in bathrooms, laundry areas and similar indoor locations. Do not use this heater in the
immediate surroundings of a bath, a shower or a swimming pool. Never locate the device
where it may fall into a bathtub or other water container. Do not immerse BedJet in water.

16. This device is not intended for use as a room air heater.

17. Do not use device outdoors.

18. Keep the cord away from heated surfaces.

19. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.

20. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.

21. Check your BedJet cord and plug connections:

a) Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be

sure the plug fits tight in the outlet.

b) Heaters draw more current than small appliances, overheating of the outlet may occur

even if it has not occurred with the use of other appliances.

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 5

c) During use check frequently to determine if your plug outlet or faceplate is HOT!

d) If so, discontinue use of the heater and have a qualified electrician check and/or replace

the faulty outlets.

22. For household use only

23. Children of less than 3 years should be kept away unless continuously supervised. Children
aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it
has been placed or installed in its intended normal operating positi on and they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved.

24. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the
appliance or perform user maintenance.

25. Children should be supervised to ensure that they do not play with the appliance.

26. CAUTION — Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.

27. Heater must not be located immediately below a socket outlet.

28. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.

29. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS DEVICE WITH
ANYSOLID STATE SPEED CONTROL DEVICES.

SAVE THESE SAFETY INSTRUCTIONS

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 6

THIS DEVICE IS A DOUBLE INSULATED PRODUCT:

SERVICING OF DOUBLE-INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor is a means for grounding to be
added to the product. Servicing a double-insulated product requires extreme care and knowledge
of the system, and is to be done only by qualified service personnel. Replacement parts for a
double-insulated product must be identical to the parts they replace. A double-insulated product
is marked with the words DOUBLE INSULATION or DOUBLE INSULATED. The symbol (square
within a square) is also able to be marked on the product.

MANUFACTURER INFORMATION:

BEDJET LLC

217 Goddard Row

Newport, RI 02840 USA
Phone: [phone]
Email: [e-mail]

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 7

Product Overview

The patented BedJet®is a forced air cooling, heating and climate comfort system designed just
for your bed at home. BedJet technology utilizes a gentle flow of air blown directly into your
bedding to provide rapid cooling and heating comfort. The Bedjet®attaches as an accessory
device to any size bed, any type mattress and works with your existing bedding. The BedJet

®

base unit is intended to be installed underneath the bed, or at the foot of the bed. The BedJet

®

product cools and heats your bed while keeping all electricity safely out of your bed where it
belongs. Convenient bedside controls include a RF remote control and a Bluetooth connected
smartphone App, available for android and iPhone devices.

Cooling is achieved by powered ventilation of the bed, utilizing fresh room temperature air to
disperse accumulated body moisture and heat out from under the sheets. Cooling mode is most
effective when the room ambient air temperature is below 79 °F(27°C). BedJet®cooling is not a
replacement for room air conditioning in extremely hot climates and may not be highly effective
if room ambient temperatures are over 80 °F(27°C).

Heating of the airflow in the base unit is achieved via a unique patent pending ceramic stone
heating element. These advanced technology ceramic stone heating elements have been
specially engineered to gently heat the air flow while maintaining internal element surface
temperatures below the burning flashpoint of air born dust and lint. This prevents any noticeable
“electric heater”odor from the BedJet®, which is commonly experienced with ordinary room
space heaters using electric coils and fans.

The BedJet’s specially engineered ceramic stone heating element also represents the highest
level of technological safety for an air heating device. Under any possible malfunction or misuse
condition, the ceramic stones will never get hot enough to melt the BedJet casing or cause
ignition of flammable materials. The heated air outlet temperatures are safe, about the same
temperature as your household HVAC register and less than the cabin heat temperature of your
automobile. While warmth will be felt in the air delivery hose, the external BedJet case is cool
the touch under any heat setting.

These technological innovations were developed by the BedJet®engineering team to ensure the
highest level of safety for our product and its new home as an extension of your bed.

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 8

BedJet and pre-installed
washable air intake filter

Pre-Installation Checklist

Before attempting installation of the BedJet, please verify the following standard parts list from
your BedJet package:

Adjustable height mattress mount
with qty. 2 pre-installed sheet clamps
and qty. 4 height extending links

Air Nozzle

BedJet base unit

Radio wireless remote control
with A23 alkaline battery

Air Hose with fabric liner,
stretchable, compressible
and bendable

USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx

QUESTIONS? EMAIL US AT [e-mail] OR CALL 401-404-5250

WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!

Revision 1.6 www.bedjet.com P a g e | 9

Proper Assembly Required:

The BedJet is required to be installed onto a bed for proper operation. All parts included are
required to be fully assembled and installed onto the BedJet as part any operation. Do not
operate the BedJet without the included Air hose and Air Nozzle installed onto the BedJet. Do
not attempt to use the BedJet with air delivery accessories or air delivery components not
approved or supplied by BEDJET, LLC. Install only qualified air delivery components supplied by
BEDJET, LLC onto the BedJet.

Bedding Requirements & JetConvect™ Theory of Operation:

The BedJet JetConvect™ air technology sends air directly into your sleeping layer. The BedJet
requires a typical top sheet or comforter to be used in bed for proper cooling and warming
operation. A quality top sheet or comforter must always be used to help trap and distribute the
BedJet air flow within the bed. Requirements for the top sheet or comforter are very simple, just
use any bedding material type (cotton, cotton blends, microfiber, etc) with a 250thread count
weave or higher. Alternatively the BedJet AirComforter™ accessory may be used as a
replacement for a typical top sheet or comforter (see Dual Zone Installation).

Use of loosely knit low quality top sheets with thread count below 250, or loose knit top sheet
weaves such as jersey knit or flannel, or performance “cooling” top sheets will result in sub­optimal BedJet experience. Use of loose knit blankets with no top sheet or no comforter will
result in sub-optimal experience. Using this type of bedding will allow the BedJet air to escape

at the bottom of the bed near the nozzle and only cool/warm your feet instead of the whole
bed.

Air Delivery Preferences:

The BedJet JetConvect™ technology warms and cools via quiet injection
of air into your bedding. Some users enjoy the feeling of ventilation and
movement air around their body and consider it delightful. Other users
may only wish to feel cooled or warmed and prefer to minimize the
movement of air under the sheets or around the body.

The BedJet accommodates both types of operation, depending on user
preference. See Cooling & Heating sections for more detail.