
EN ZS5301-0002 Installation Manual Wall/Panel Mount Bracket
DE ZS5301-0002 Installationsanleitung Wandmontageadapter
FR ZS5301-0002 Manuel d'installation Kit de montage mural
ES ZS5301-0002 Manual de instalaciĆ³n Soporte de montaje en pared/panel
Doc. ID: PU-200.100.26-xxA (2020-06-03-MR1)
Product Description
The ZS5301-0002 is a mechanical accessory to mount a device on a flat surface or
panel without utilizing a DIN-rail.
The order number ZS5301-0002 contains two brackets and four mounting screws
needed for one device.
Intended Use
This mechanical accessory is designed for DIN-rail devices. Check the product
datasheet of the DIN-rail device to confirm that it is suitable for the desired device.
Technical Data
Size (width x height x depth)
Weight
Mechanical Dimensions
18x145x28mm
180g / 0.4lb
Mounting Example
All dimensions in mm
Beckhoff Automation GmbH & Co. KG
Huelshorstweg 20 - 33415 Verl - Germany
Phone: +49 (0) 5246 963 0, Fax.: +49 (0) 5246 963 149
The information in this document is believed to be accurate and reliable and may change without notice.
www.beckhoff.com

ZS5301-0002 Installation Manual
Installation Instructions
Mount the two steel brackets on the sides of the unit by using the self tapping countersunk screws included with the kit. The two brackets are
symmetrical so there is no specific left or right side. Two screws are needed for each bracket which requires a Torx-T10 screwdriver. Tightening
torque: 0.7-0.8 Nm (6.2-7.1 lb-in)
For some narrow units, the black plastic DIN-rail slide on the back of the unit may overlap with the mounting holes of the steel brackets. In such
cases we recommend removing the black DIN-rail slide.
Removing instructions: Using a flat-blade screwdriver, push the lock tab downwards while at the same time push the plastic DIN-rail slide upwards.
Remove the plastic slide.
WARNING - Risk of electrical shock, fire, personal injury or death.
Do not use other screws than the self tapping countersunk screws included with the kit. The unit might become unsafe when using longer screws as
contact with live electrical circuits may occur.
Installation Instructions
Removing the Plastic DIN-Rail Slide