Becker INDIANAPOLIS 7925, INDIANAPOLIS 7920, INDIANAPOLIS 7922, INDIANAPOLIS 7923 User Manual
Navigation CD 2.X
Navigation mode
If you received this operation guide update when purchasing a new unit, the
functions and modifications described
from Page 11 are intended as a supplement to your operation guide.
If you received this operation guide update together with an update CD, the update procedure and the new functions
and modifications to the previous mode
of operation are described on the following pages.
Installation update CD 2.X
X Remove the old navigation CD.
X Insert the new 2.X navigation CD.
After a short time, the following display
or a similar display appears.
X Then turn the right rotary control to
select
NEW VERSION: UPDATE.
X Press the right-hand rotary control .
Notes:
• Select
• Press the left rotary control to dis-
OLD VERSION: BACK to
abort the update.
play information on the new version.
The navigation and radio software is
now updated.
Progress bars appear on the display
while the update is taking place.
Note:
While the navigation and radio software is being updated the
• vehicle ignition should be switched on.
• vehicle must not be moved.
After the radio software has been updated the software will be restarted (reset).
The navigation software update then
starts. The update has been completed
when navigation mode can be selected
again.
Subject to errors and technical changes 10 Copyright by HARMAN/BECKER Automotive Systems GmbH, D-76303 Karlsbad
Navigation CD 2.X
Modifications to navigation
mode
The following modifications have been
made to navigation mode or the following new functions have been added.
• Navigation CDs
• Displaying/changing settings during
route guidance
Navigation CDs
You will be supplied with four navigation CDs.
These CDs contain a digitised road map.
• CD 1 contains the data covering:
Denmark, Great Britain, Finland, Ireland, Norway and Sweden.
• CD 2 contains the data covering:
Austria, Belgium, Denmark, Germany, Liechtenstein, Luxembourg, the
Netherlands and Switzerland.
• CD 3 contains the data covering:
Andorra, Belgium, France, Luxembourg, Portugal and Spain.
• CD 4 contains the data covering:
Austria, the Czech Republic, Italy,
Liechtenstein, Monaco, San Marino,
Slovakia, Switzerland and the Vatican
City.
In addition to the countries listed above,
all the CDs also contain the complete
trunk road network of the digitised area
of Europe.
Motorways, federal and regional roads,
as well as district roads are stored for the
countries included on the individual
CDs. Larger cities and communities are
comprehensively covered. For smaller
towns and communities, the regional
and unclassified roads or access roads
and the town centres are included.
One-way streets, pedestrian zones, turn
bans and other traffic regulations are
taken into account as far as possible.
Note:
There may be discrepancies between
the data on the navigation CD and the
actual local situation, due to continual
changes to road systems and their traffic regulations.
Subject to errors and technical changes 11 Copyright by HARMAN/BECKER Automotive Systems GmbH, D-76303 Karlsbad
Navigation CD 2.X
Note:
For Norway, Sweden, Finland, the
Czech Republic and Denmark, Nonverified data has been used to achieve
a high depth of digitisation; i.e. with
this data, the navigation system cannot
refer to information such as motorway,
trunk road, 30 zone, one-way street or
other traffic regulations, as this is not
recorded.
All roads can be used, but optimum
route guidance cannot be guaranteed.
Navigation with four European
CDs
1
5
6
7
2
Area covered by CD
1
1.
2 Area covered by CD
2.
3 Area covered by CD
3.
4 Area covered by CD
4.
5 Overlapping area
covered by CD 1
and CD 2.
6 Overlapping area
covered by CD 2
and CD 3.
7 Overlapping area
covered by CD 2
and CD 4.
4
3
Subject to errors and technical changes 12 Copyright by HARMAN/BECKER Automotive Systems GmbH, D-76303 Karlsbad
Loading...