Page 1
WHAT’S IN THE BOX
M2M
Model: MX-100U
Quick Install Guide
MX-100U
Washer x 6pcs
Wideband
Antennas
Screw x 7pcs
(M4*L8mm)
Bracket
Round-Head Screw
4pcs (3Ψ*12mm)
DEVICE OVERVIEW
USB Connector
(Male to Male)
w/ screw x 4pcs (4.5mm)
Accessory
Options
SIM Slots
(Single Module, Dual SIM)
AUX MAIN
BEC USB Connector
(male-to-male)
MX-1000 M2M Router
USB 3.0 Connector
PC / Laptop
SIM1
SMA Female Connector
Auxiliary Antenna
SMA Female Connector
APPLICATION DIAGRAM
Standard 2.0/3.0 USB Cable
Embedded System
GPS Antenna
(OPTION)
Kiosk, Vending,
OEM Design Applications,
and more.
SIM2
Main Antenna
SMA Female Connector
Control Manager
Windows platform:
Use Sierra Wireless
Skylight, connection utility,
to manage the MX-100U.
Contact your BEC Sales
representative for more
information.
Page 2
ATTACHING TO A MX-1000 M2M ROUTER
KIT CONTAINS: Bracket plate, USB connector with 4 screws, 6 Washers, 7 Machine Screws, and 4 Round-Head Screws
The kit is designed to securely attach the MX-100U on top of the MX-1000 to offer additional WAN/Cellular Connectivity.
No additional drivers required. Simply attach and ready to go.
Remove the screws from the back of the MX-100U.
I
Attach and fasten the Bracket (known as bracket plate)
II
on top of the MX-100U using two (2) round-head screws
included in the kit.
1. MX-100U 2. Bracket Plate 3. Round-head Screws*2
3
2
1
I
IV
Attach and fasten the BEC USB Connector to the
MX-100U and MX-1000 router using (2) small screws
(4.5mm) included in the box of the USB Connector.
1. BEC USB Connector 2. Screws*2
WAN2
MAIN
WAN1
MAIN
POWER INTERNET
POWER
WAN2
AUX
USB1 USB2
WAN1
AUX
GPS
GPS WAN1 WAN2
Gb ETH
1 2 3 4
1
2
3
WAN2
MAIN
WAN1
MAIN
POWER INTERNET
POWER
WAN2
AUX
USB1 USB2
WAN1
AUX
GPS
GPS WAN1 WAN2
Gb ETH
1 2 3 4
MX-1000 (Standard Version)
III
Attach and fasten the Bracket, from ,on top of the
II
MX-1000 M2M Router, no IP50, using (4) washers and
(4) machine screws (M4*L8mm) included in the kit.
1. MX-100U w/ Bracket Plate 2. Washers * 4
3. Machine Screws * 4
3
1
WAN1
AUX
WAN2
POWER
AUX
USB1 USB2
WAN1
MAIN
POWER INTERNET
MX-1000 (No IP50)
GPS
GPS WAN1 WAN2
Gb ETH
1 2 3 4
MX-1000 (with IP50)
III
Attach and fasten the Bracket, from ,on top of the
II
MX-1000 M2M Router, with IP50, using (4) machine
screws (M4*L8mm) included in the kit.
1. MX-100U w/ Bracket Plate 2. Machine Screws * 4
2
1
2
WAN2
MAIN
WAN2
WAN1
MAIN
POWER INTERNET
POWER
AUX
USB1 USB2
WAN1
AUX
GPS
GPS WAN1 WAN2
Gb ETH
1 2 3 4
MX-1000 (W/ IP50 Sleeve)
WAN2
MAIN
V2.00
Page 3
1
2
SKYLIGHT CONNECTION MANAGER INSTALLATION (WINDOWS 7 / 8 / 10)
INSTALLING MX-100U DRIVER
CONFIGURING MX-100U
Download the driver from the
link here:
http://bectechnologies.net/portf
olio_item/mx-100u/
Then click the Resource tab.
Click Next to
continue
3
4
Click
“I accept the
terms in the
license
agreement”
Then Next
to continue.
5
Sierra Wireless Skylight is a connection manager application which is compatible with MX-100U
for connection management, APN profile configuration, and signal & speed display. For more
information, please visit Sierra Wireless (www.sierrawireless.com) or contact your BEC Sales
representative.
Please wait
until the install
finishes to
continue.
Installation
Complete!
Click Finish to
exit
Sierra® Wireless Skylight icon will
appear on your desktop after driver
installation is completed.
The Skylight application will pop up
when MX-100U is plugged. Otherwise,
manually click to start the application.
Click on
Click here to change
your connection/APN
settings
Select configuration icons in User Options then
entered all information provided by your Cellular
Provider. Example: Select Profile to change APN and
turn on Autoconnect. Click OK to save and exit
Click the drop-down to select
your carrier from the carrier
list.
Loading...