Nero Framed Installation Manual
www.beautyfires.com
Operating Manual
Thank you for purchasing this Beauty Fires Burner Mount. Beauty Fires is very safety
conscious, we have taken every care in designing, manufacturing and assembling your
Beauty Fires Slimline Burner Mount to ensure it operates effectively, efficiently and safely. In
return we ask that you exercise care when using and installing this product and follow the
instructions provided. Please make sure that you have read and understand the Beauty
Fires Slimline Burner Manual that you received with the Slimline Burner itself before
attempting to install any mount or any accessory for the mount. Before using your Beauty
Fires Burner Mount, please read all the information contained in this operation manual
carefully. Beauty Fires cannot be held responsible for any damage or i n jury caused if these
instructions are not followed. Beauty Fires Burner Range does not require any form of
permanent fixture or fitting, such as a flue for ventilation, a permanent gas connection or
any kind of fixed utility for fuel supply. When using this fireplace, basic precautions should
always be followed, including but not limited to the following. Read all instructions and
warnings before using this fireplace.
WARNING
• DO NOT SPILL WHEN FILLING THE SLIMLINE BURNER AND NEVER OVERFILL THE SLIMLINE
BURNERS INTENDED CAPACITY.
• USE ONLY THE FUEL FOR WHICH THE SLIMLINE BURNER IS INTENDED.
• DO NOT TOUCH THE EXTERIOR OF THE SLIMLINE BURNER DURING OR AFTER BURNING.
• PARTS OF THIS SLIMLINE BURNER CAN REACH HIGH TEMPERATURES.
• DO NOT HAVE COMBUSTIBLE OBJECTS IN CLOSE PROXIMITY TO THE BURNER.
• NEVER POSITION THE BURNER WITHIN RANGE OF COMBUSTIBLE ITEMS THAT CAN BE
MOVED/BUMPED BY ACCIDENT, OR BLOWN BY THE WIND. E.G. CURTAINS, BLANKETS,
PAPERS ETC...
• ONLY USE THE SLIMLINE BURNER IN AREAS WITH GOOD VENTILATION.
• DO NOT COVER THE SLIMLINE BURNER VENT WITH ANY DECORATIVE ITEMS WHETHER THEY
ARE COMBUSTIBLE OR NON COMBUSTIBLE , INCLUDING BUT NOT LIMITED TO ARTIFICIAL
LOGS, STONES, PEBBLES, GLASS BEADS, ETC...
• DO NOT ADD, OMIT OR AMEND ANY PARTS OF THIS BURNER OR ITS ACCESSORIES.
CAUTION
• Make sure you have read and understood this manual before using this product.
• If fuel is spilled during filling, wipe with a dry cloth and allow the rest to evaporate
before introducing a flame to the burner.
• If the burner is overfilled then follow the steps given in the Slimline Burner Manual.
• To refill, wait until the burner is at the room temperature after the flame has been
extinguished. NOTE the flame can linger in the chamber for a while after the Sliding Lid
has been closed. NOTE: the flame may not be visible to the naked eye.
• Never refill over or near an open flame.
• Use only the supplied funnel or pump to refill.
ALWAYS KEEP HANDY A CLASS B FIRE EXTINGUISHER:
Class B fire extinguishers are use to put out fires that are caused by combustible liquids.
Class B fire extinguishers quell the flames by expelling a dry chemical powder or foam with
nitrogen propellant. The specific chemical can vary depending on the make or model.
Water may not extinguish this flame.
CONTENT OF PACKAGING:
• Hanger Bracket - qty 1 (wall fitting not supplied)
• Wall Box - qty 1
• Burner Tray - qty 1
• Fascia Assembly - qty 1
• Safety Clips - qty 2
NOTE: Beauty Fires does not supply the wall fixings for the Hanger Bracket to be fitted to
the wall because these fixings may need to vary depending on the material that the wall
is made of, that the Burner Mount is being fixed to. Please consult a hardware specialist if
you are unsure.
Perspective - Nero Frame Assembled
1 - Product Specifications & Sizes
Wall
Overall Product Sizes:
Burner Size
A = Fascia
Length
B = Wall Box
Length
C = Fascia
Opening
D = Distance
From Wall
E = Wall Box
Depth
Weight
800mm 1150mm 900mm 800mm 170mm 134mm XXkg
1100mm 1450mm 1200mm 1100mm 170mm 134mm XXkg
1400mm 1750mm 1500mm 1400mm 170mm 134mm XXkg
Materials - Mild Steel (Stainless Steel Facia also available)
Applications - Indoor Only
Compatible Burners - Beauty Fi res Slimline Burner Range
CLEANING & MAINTENANCE:
The surface of the inner metal sheet at the back of the fireplace can change with time
due to exposure to the heat of the fire which leads to a slight change in colour or
structure. This is to be considered normal wear and tear and does not constitute a product
flaw or fault. We recommend cleaning the back with a dry sheet of kitchen paper tower
followed by a well wrung wet lint‐free cloth.
2 - Wall Hanger Bracket Position
Size Burner
A = Fascia
Length
B = Fascia
Height
C = Fixing
Position
D = Fixing
Position
E = Fixing
Position
F = Fixing
Position
800 mm 1150mm 590mm 265mm 620mm 60mm 530mm
1100 mm 1450mm 590mm 265mm 920mm 60mm 530mm
1400 mm 1750mm 590mm 265mm 1220mm 60mm 530mm
The drawing and table above shows the position of the wall fixings relative to the finished
position of the Fascia Assembly once everything is finished being assembled. The Slimline
Burner needs to be mounted 100% level which is why the Hanger Bracket is designed to be
slightly adjustable in case the screw positions are not correct. This is achievable by sliding
the Hanger Bracket from left to right when the fixings are in position (but not yet fastened)
and by using a spirit level to make sure the Hanger Bracket is level.
3 - Location, Positioning & Precautions
• Make sure that the Slimline Burner and or Slimline Burner Mount is installed no closer than
1m (40 inch) from any combustible items such as furniture, curtains, etc. See image
below this section.
• Do Not Place valuable items such as artwork, electronic devices, etc. above the
Slimline Burner and or Slimline Burner Mount as the hot air that rises from the flame may
damage such items.
• This specific Slimline Burner Mount is not intended to be Built-In, it is designed to be flush
mounted on a surface as indicated in this manual. There are other Slimline Burner
Mounts available in the Beauty Fires Product Range intended for Built-In applications.
• Always make sure the room in which the Slimline Burner is situated in is well ventilated
when the Slimline Burner is in use.
• Position the Slimline Burner and or Slimline Burner Mount where it will not be affected by
any breeze or draft, as this may affect the behaviour of the flame in an uncontrollable
and unpredictable manner.
• This Slimline Burner and or Slimline Burner Mount may not be mounted in a room made
of a highly combustible material.
• Do not cover any of the vents (top, bottom or back) of the Wall Box of this Slimline
Burner Mount.
• Never place anything on top of this Slimline Burner Mount.
• It is advisable to consider children and pets when selecting a position for mounting of
this Slimline Burner Mount. Always make sure it is not within their reach.
• Never leave the Slimline Burner unattended when it is lit, or if it has just been
extinguished.
Min. 1m
4 - Installation Procedure
When purchasing Wall Fixings, make sure there are no plastic components. Use only metal
Wall Fixings that will support the weight of the Slimline Burner Size you have purchased...
see Product Specifications & Sizes table in this manual.
When installing this Slimline Burner Mount you will require the following:
• Appropriate Wall Fixings - qty 2
• Corresponding tool for fastening the above mentioned Wall Fixings.
• Power drill - and correct bits for Wall Fixings selected.
• Spirit Level
• Tape Measure
Perspective - Nero Frame Exploded
Step 1:
After selecting an appropriate position for the Slimline Burner Mount to be located, mark
out and fasten the Wall Hanger Bracket to the wall.
Slot for Wall Fixing
NOTE: After hooking the Wall Box onto the Wall Hanger Bracket (Step 2), make sure that
the Safety Clips (image below) supplied are fitted into the appropriate holes to prevent
the Wall Box from accidentally becoming dislodged when the flame is burning.
Step 2:
Once the Wall Hanger Bracket is secured to the wall, hook the Wall Box onto the Wall
Hanger Bracket and secure in place with the Safety Clips.
Facia Assembly Clips
Wall Hanger Bracket with
Safety Clips in place
(both ends).
Wall Box
Step 3:
Once the Wall box is secured to the wall, place the Burner Tray inside the Wall Box. Y ou will
have to insert it at an angle, without the Slimline Burner in place at first, as shown in the
image below. Once the Burner Tray is in place, only then can you insert the Slimline Burner
as shown in Step 4
Burner Tray
Wall Box
Burner Tray
Wall Box
Step 4:
Using the hooks at the back end of the Sliding Lid Handles supplied with the Slimline
Burner, lower the empty Slimline Burner into the Burner Tray cut out as shown below. It is not
advisable to do this if the Fuel Tank contains fuel.
Step 5:
All that's left to do now is to hook the Fascia Assembly onto the Wall Box, fill the Slimline
Burner with the appropriate fuel, ignite and enjoy. Please refer to instruction in the Slimline
Burner Manual supplied with the Slimline Burner for the appropriate manner in which to do
this.
Cocoon Fires SA cc t/a Beauty Fires warranty Terms and Conditions:
1. All warranty claims are subject to manufacturer’s review and acceptance.
2. Beauty Fires warrants that it uses reasonable care and skill to ensure that its design products
are of reasonable quality. Beauty Fires will at it's cost and in it's sole discretion: (i) remedy any
defect or fault in any product purchased; or (ii) replace any product in respect of which there is a
defect or fault, during the warranty period, provided that written notice is given by the Purchaser to
Beauty Fires of any such defect or fault in the product as soon as the Purchaser becomes aware of
that fault or defect. All warranty claims must be returned to Beauty Fires for assessment with a
receipt or other proof of payment. No warranty is given in respect of any glass contained in any
product.
3. Beauty Fires has no liability to remedy any defect in a product or replace a
product where the defect or fault is caused or contributed to by (i) the failure of the
Purchaser to install the product according to specific installation instructions either supplied within
each product box or carton or available on the Beauty Fires website or through the retailer or
Beauty Fires representative; or (ii) use of the product in a
manner or for a purpose for which it was not designed.
4. All site application or installation must reflect these procedures otherwise the product warranty
will be considered void or will not take effect.
5. Except as provided for in this warranty, and to the extent allowed by law, Beauty Fires liability in
respect of the product under the law of any State or Territory is excluded. Where liability may be
limited but not excluded by any applicable State or Territory law, liability is limited to the full extent
possible under that law.
6. This Clause 5 will only apply in Australia to the extent to which the provisions of the
Commonwealth Trade Practices Act 1974 (the “Act”) apply to contracts entered into by Beauty
Fires for the provision of goods and services. In all other countries the local equivalent Trade
Practices legislation shall apply and Beauty Fires exercises all of its rights to limit its liability to the
full extent allowed. Pursuant to section 68A of the Act, this Clause 6 applies in respect of the goods
or services supplied by Cocoon Fires Pty Ltd which are not of the kind ordinarily acquired for
personal, domestic, or household use or consumption, provided that this Clause 6 will apply if the
Purchaser establishes that reliance on it would not be fair and reasonable. Liability for a breach of
a condition or warranty implied by the Act is limited to any one of the following, as determined by
Cocoon Fires Pty Ltd in its sole discretion: (i) the replacement of the goods or the supply of
equivalent goods; (ii) the repair of the goods; (iii) the payment of the cost of replacing the goods or
acquiring equivalent goods; or (iv) the payment of the cost of having the goods repaired. In no
event will Cocoon Fires Pty Ltd be liable to the Purchaser for any damages, including lost profits,
lost savings or any other incidental or consequential damages arising out of the use or inability to
use the product or any claim by any other party. All claims are limited to the repair or the
replacement of the products only and do not include any labor or transportation charges. The entire
risk as to the use and performance of the product is assumed by the Purchaser.
All products bearing the logo of Beauty Fires is covered by a 2 year
warranty.
IMPORTANT:
• Stone chipping, painting scratches and general scratches are not covered by the
Warranty.
• Due to the characteristics of Stainless Steel, over time the finish will mature through
natural processes associated with the use with heat and a flame.
• Is it recommended the Stainless Steel Components be polished annually with a non
abrasive polish to bring & restore the finish and also to regularly clean the products from
residue and dirt.
For any further information please contact
www.beautyfires.com
www.beautyfires.com
Loading...