DRAFT: User Manual
Ready Beartooth for Adventure
Your Beartooth has been hibernating on the journey to you. It is important that you make sure your Beartooth is fully charged before you set out on your next adventure. Please fully charge Beartooth before initial operation using the enclosed USB A male to USB B micro cable via the micro USB port found at the base of the device. The LED will flash orange while charging. You will be able to monitor Beartooth’s state of charge via the Beartooth app on your smartphone.
Installation
For iOS devices, please locate the Beartooth app on iTunes, download, and install. For Android devices, please locate the Beartooth app on the Google Play store, download, and install.
Press and hold the power button until the LEDflashes twice. This should take about 3 seconds.
Press and hold the Bluetooth pairing button until the LED flashes continuously.
Your Beartooth is now ready to pair with the smartphone.
Start the Beartooth appand follow the pairing instruction inside smartphone phone app to pair.
The LED will turn to solid orange once you have paired successfully
You may pair and un pair your Beartooth to a new smartphone anytime you like.
Simply follow the unpair device instructions in your smartphone operating system.
Loading...