Page 1
V2.2
Ref. No.: 150.672
WH-248 LED WASH
24X 8W QUAD DMX
MANUAL
Page 2
- 2 -
Thank you for purchasing one of our products. Before you use this product please read these instructions
carefully to enjoy optimal performance and a longer service life.
UNPACKING INSPECTIONS
Unpacking instructions
• Please unpack the carton and check the goods carefully when you receive it , if you discover any
packing damage, shortage or quality problems, please notify the shipper and reject the goods.
• Before using this product, please read the instructions carefully and store them in a safe place for
future reference.
SAFETY INSTRUCTIONS
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
• Never put tiny metal objects such as a screwdriver, iron wire, etc. into this product in case of a short
circuit .
• Please make sure that the voltage of the outlet to which you are connecting this product is within
the range stated on the decal or rear panel of the product.
• Avoid physical damage to the product during transportation. Never carry this product from the
power cord or any moving part . Always use the hanging / mounting bracket or the handles.
• This product is for indoor use only. To avoid risk of fire or shock, do not expose this product to rain
or moisture.
• Never pull or tug on the cord and change it for another one, stop using it when it is damaged or
becomes hot .
• Stop using the product once there are sparks when connecting it to the power socket.
• Do not operate this product with wet hands and never place it near water or any other liquids.
• Make sure there are no flammable materials close to the unit while operating. Always install it in a
location with adequate ventilation.
• When the original lightning source is damaged, do not replace it with a lightning source which has
different specifications and ratings.
• Always disconnect this product from the power source before replacing the light source or the fuse.
• The maximum ambient temperature is 40°C(104°F).
• Never clean the unit w it h water, thinner or any other dissolving agent .
• Stop using the product in case of a serious operating problem and send it to our maintenance agent
immediately. Never get this product repaired by non-professional work er s.
• Avoid direct eye exposure to the light source while this product is on.
• Never clean the fixture by water, thinner or other dissolved agent .
• Stop using the product in case of a serious operating problem and send it to our maintenance agent
immediately. Never repair by non-professional workers .
• Avoid direct eye exposure to the light source while the product is on.
Page 3
- 3 -
SPECIFICATION
Tilt movement:
220° manually
No. of LEDs:
24x 8W Quad LEDs
No. of patterns:
10
DMX channels:
1-4-8
IP Rating”:
IP65
Power Supply:
220-240Vac / 50Hz
Consumption:
230W
MAINTENANCE
The unit should be cleaned periodically to ensure the optimal performance, smudginess can decrease the
life of the light source and the output of light is affected by the dust which can make the machine overheat.
It is advised to perform maintenance 2 times a month. Be sure to disconnect the unit from the power socket
before cleaning.
Do not clean until the unit recovers a normal temperature, use the lens tissue or soft cotton cloth with
alcohol and wipe gently.
The cleaning frequency depends on the environment in which this unit operates, damp, smoky or dirty
surroundings can cause greater accumulation of dirt on the optics. Never rub or press strongly on the panel.
FUNCTIONS INTRODUCTIONS
Main Functions
• 1, 4 or 8 DMX channels.
• DMX, auto and master/slave mode .
• 24x 8W Quad LEDs
• 10 Built-in programs
• Electronic dimming 0 – 100%
Page 4
- 4 -
SYSTEM MENU
Stat - Set the static color mode and strobe mode
Press MENU, press the UP or DOWN button until “Stat” is displayed, press ENTER.
You have now 5 options. To select the desired option press ENTER. With the UP and DOWN button the
desired value can be set. Press ENTER to confirm the desired value.
Colo - Built-in color mix
Press MENU, press the UP or DOWN button until “Colo” is displayed, press ENTER.
“Colx” will now be displayed, (“x” repres enti ng a num ber between 0 - 51). Press the UP or DOWN button to
find the desired static mode. Press ENTER to confirm.
Page 5
- 5 -
Auto mode - This menu will let you select the desired auto mode
Press MENU, press the UP or DOWN button until “Auto” is displayed, press ENTER.
There are 11 auto modes, press the UP or DOWN button to select the desired mode, press ENTER to
confirm.
Channel mode - Select the desired channel mode
Press MENU, press the UP or DOWN button until “Chnd” is displayed, press ENTER
“X Ch” will now be displayed, (“X” represents the displayed channel mode). Press the UP or DOWN button
to find the desired channel mode. Press ENTER to confirm.
DMX Address - Set the DMX address
Press MENU, press the UP or DOWN button until “Addr” is displayed, press ENTER.
“Axxx” will now be displayed, (“xxx” represents the displayed address). Press the UP or DOWN button to
find the desired address. Press ENTER to confirm
Pasd - Password function switch
Press MENU, press the UP or DOWN button until “Pasd” is displayed, press ENTER.
Set the password for the password function. Password is MENU – UP – DOWN – ENTER
Tenp: Temperature
rEST: Reset
Info - Will display the software version and working time of the unit.
Press MENU, press the UP or DOWN button until “Info” is displayed, press ENTER.
The software version of the unit will be displayed. Press MENU to leave this function
Slave mode - In this mode the unit functions as a slave
Press MENU, press the UP or DOWN button until “Slav” is displayed, press ENTER. “Sla” will now be
displayed, Slave mode is confirmed. The unit will now act as a slave in Auto, sound and chase mode.
OPERATING INSTRUCTIONS
DMX connection.
M
aster / Slave connection.
Page 6
- 6 -
DMX CHANNELS
1 DMX Channel mode
DMX
Value
Desciption
1
000 – 000
Light off
001 – 004
Color 1
005 – 009
Color 2
010 – 014
Color 3
~
240 – 244
Color 49
245 – 249
Color 50
250 – 255
Color 51
4 DMX Channel mode
DMX
Value
Desciption
1
000 – 255
Red
2
000 – 255
Green
3
000 – 255
Blue
4
000 – 255
White
8 DMX Channel mode
DMX
Value
Desciption
1
000 – 255
Master dimmer
2
000 – 255
Red 3 000 – 255
Green
4
000 – 255
Blue
5
000 – 255
White
6
000 – 255
Strobe
7
000 – 000
Channel 1 – 6
001 – 024
Auto 1
025 – 049
Auto 2
050 – 074
Auto 3
075 – 099
Auto 4
100 – 124
Auto 5
125 – 149
Auto 6
150 – 174
Auto 7
175 – 199
Auto 8
200 – 224
Auto 9
225 – 249
Auto 10
250 – 255
Auto 11
8
000-255
Auto Speed Ch 7 (slow-fast)
Page 7
- 7 -
CE Declaration of Confo rmity
Importer: TRONIOS BV
Bedrijvenpark Twente 415
7602 KM - ALMELO
Tel : 0031546589299
Fax : 0031546589298
The Netherlands
Product number: 150.672
Product Description: WH-248 LED Wash 24x 8W Quad DMX
Regulatory Requirement: EN 60598-1/-2-17
EN 55015
EN 61547
EN 61000-3-2/-3-3
The product meets the requirements stated in Directives 2006/95 and 2004/108/EC and conforms to
the above mentioned Declarations.
13-12-2012
Signature:
P. Feldman
Page 8
Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2013 by TRONIOS the Netherlands
Loading...