BeamZ DMX65W Quickstart Guide

154.067 V1.1

DMX65W CONTROLLER

This controller has a wireless DMX transmission on board which operates on 2.4Ghz frequency band. The controller acts as a transmitter and needs
a receiver (item 154.077 BPP Wireless DMX Transmitter/Receiver) or Beamz fixture with built-in 2.4Ghz DMX transmission.

To activate wireless DMX:

Press button,
Select and confirm with button,

Note: Keeps DMX address standard at value “1”, in complex installation you can change start address.

Select and confirm with button,

Select and press button to switch between “ON” and “OFF”.

Select and press button to select your wireless DMX universe with number 1 to 7.

Ready? Go back to the “main” menu with button.

Note: If you want to turn off the LED indicator near the display, you can easily do this by going to , , and
press button to select “OFF”.

With this controller you are able to create 8 different chases with 15steps each, play chase with adjustable speed and fade time.

Create your own chase:

Press button,
Select and confirm with button,
Select and confirm with button,

Select your chase ID with or button and confirm with button,

Select and confirm with button.

Before we go further you need to know each function in OLED display:

Select DMX channel with button and select DMX value with the fader corresponding to the DMX channel,
Select step with button and repeat the above step up to a maximum of 15 steps.

Note: Last step must be confirmed with button.

Ready? Go back to the “effects” menu with button.

Play your own chase:

Press button,
Select and confirm with button,
Select and confirm with button,

Select your desired light output with master fader
Select your desired chase ID with chase fader
Select your desired chase speed with speed fader

Select your desired fade time between each step with fade fader

Ready? Go back to the “effects” menu with button.

1

Red

1 ~ 512

2

Green

1 ~ 512

3

Yellow

1 ~ 512

4

Blue

1 ~ 512

5

Magenta

1 ~ 512

6

Cyan

1 ~ 512

7

White

1 ~ 512

Delete your own chase:

Press button,
Select and confirm with button,
Select and confirm with button,

Select your chase ID with or button and confirm with button,

Select and confirm with button,

Note: This step cannot be undone!!

This controller is able to activate and deactivate a chase (ID number) at a specific time.

When using the timer function, do not switch off the controller!

Set your timer function:

Press button,
Select and confirm with button,
Select and confirm with button,

Select your chase ID with or button and confirm with button,

Note: number 8 means manually

Select and confirm with button,
Enter the actual time by “TIME”
Enter start time by “POWER ON”

Enter end time by “POWER OFF”

Note: For long-term and optimal battery life, we recommend setting “POWER OFF BAT” at a minimum of 10%. Controller will
automatically switched off as soon as set percentage is reached.

Ready? Go back to the “main” menu with button.

For longer operation and to save battery energy, you can automatically switch off OLED display after no operation has taken place for a certain
period of time.

Set your display battery saver:

Press button,

Select and confirm with button,

Select and confirm with button,

Select and select “ON”, “OFF” or “LOGO” with button,

Select and confirm with button,

Select your time between 3 till 255 seconds with or button and confirm with button.

Ready? Go back to the “main” menu with button.

When used in public spaces, unauthorized persons can consciously or unconsciously change the lighting settings. This is usually undesirable and
you can therefore set a password.

Set your password:

Press button,

Select and confirm with button,

Select and select “ON” or “OFF” with button,

Select and confirm with button,

Fill in the standard password , , , .
Now you can create your own password with , , or buttons.

Ready? Go back to the “main” menu with button.