
The LEDs can be switched on with the button ON and switched off with the button OFF.
Use the buttons and to adjust the brightness for the static colours or speed in program mode.
Warm White
Cool White
Warm White + Cool White
Warm White + Cool White
Press one of the twelve colour buttons to select a built-in programme.
Colour switch
Colour strobe
Colour fade
Colour switch and strobe
Pre program (alone) with speed adjustment
Auto run (master) with speed adjustment
Input password (Beamz authorization only)
LED Temperature calibration
Manual control cool white LED
Manual control warm white LED

Strobe effect slow to fast
Pulse-effect in sequences slow to fast
Random strobe effect slow to fast
Macro speed from slow to fast