
The LEDs can be switched on with the button ON and switched off with the button OFF.
Use the buttons and to adjust the brightness for the static colours or speed in program mode.
Select red colour
Select green colour
Select blue colour
Select white colour
For constant lighting of all LEDs in one colour, press the corresponding colour button.
Colour switch
Colour strobe
Colour fade
Colour switch and strobe
Pre program (alone) with speed adjustment
Auto run (master) with speed adjustment
Input password (Beamz authorization only)
LED Temperature calibration
Manual control red pixel LED
Manual control green pixel LED
Manual control blue pixel LED

Strobe effect slow to fast
Pulse-effect in sequences slow to fast
Random strobe effect slow to fast
Macro speed from slow to fast