Beamz MHL-715, 150.527 User Manual

Download

Page 1

- 1 -

Ref. No.: 150.527

MHL-715WISPOT 7X 15W QUAD

DMX 2.4GHZ

MANUAL

Page 2

- 2 -

Thank you for purchasing our company products. Please read these instructions carefully to enjoy optimum performance and a longer service life before

you start to use.

UNPACKING INSPECTIONS

Unpacking instructions

 Please unpack the carton and check the goods carefully when you receive it , if discover

packing damage, shortage or quality problem, please notify the shipper and reject the goods.

 Before using this product, please read the instructions carefully and keep it in a safe place for

future reference.

Checking the contents of the carton:

The product, Power cord, Instruction Manual, Mounting Bracket

Page 3

- 3 -

Safety Instructions

 Safety and regulatory power socket with high quality output should be used .  Always connect the product to a grounded circuit to avoid the risk of electrocution.  Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or

stretch into the machine in case of short circuit .

 Please make sure to connect the proper voltage and do not higher or lower than that stated on

the decal or rear panel of the product .

 Avoid hitting, crashing or squeezing with other objects in transportation. Never carry the

product from the power cord or any moving part . Always use the hanging / mounting bracket or the handles.

 The product is used in door only .  Never pull or tug on the cord and change it for another one , stop using it when it is damaged

or becomes hot .

 Stop using the product once there is sparks when connecting with the power plug .  Can not operate product with wet hands and never place it near the water or other liquid.  Make sure there are no flammable materials close to the fixture while operating . Always install

it in a location with adequate ventilation.

 Never replace the lighting source with different specification and rating when the original one

is damaged.

 Make sure to power off before replacing the light source or the fuse. Never do it while it is on.  The ambient temperature is no more than 40°C(104°F) .  Never clean the fixture by water, thinner or other dissolved agent .  Stop using the product in case of a serious operating problem and send it to our maintenance

agent immediately. Never repair by non-professional workers .

 Avoid direct eye exposure to the light source while the product is on.

PRODUCT OVERVIEW

FUNCTIONS INTRODUCTIONS

Main Functions

 9 or 12 DMX channels .  Sound active, (wireless) DMX, master/slave mode .  7x 15W high quality QUAD LEDs.  With static colors, strobe, dimmer, color mixing and changing effects.  Pan/Tilt inversion  Electronic dimming 0 – 100%

Page 4

- 4 -

System menu

Page 5

- 5 -

DMX Address – Set the DMX address

Press the UP or DOWN button until “DMX address” is displayed, press ENTER.

“X” will now be displayed, (“X” represents the displayed address). Press the UP or DOWN button to

find the desired address. Press ENTER to confirm

System Reset – Use this function to reset the fixture.

Press the UP and DOWN button until “System Reset” is displayed, press ENTER. The fixture will reset.

Firmware Version – This will display the software version

Press the UP or DOWN button until “Firmware Version” is displayed, press ENTER. The software version will be displayed.

Fixture Time – With this function you can display the running time of the fixture.

Press the UP or DOWN button until “Fixture Time” is displayed, press ENTER. The running time of the fixture will be displayed.

White Balance – This menu will let you select your desired strobe mode

Press the MENU button and UP button or DOWN button until “White Balance”is displayed, press ENTER. Press ENTER to display the “red” “green” “blue” and then press ENTER, the “RXXX” “GXXX” “BXXX” XXX is the value of red, green and blue, then press the UP or DOWN to adjust the value.

Auto Test – With this function you can manually test the individual features.

Press the UP and DOWN button until “AutoTest” is displayed, press ENTER. Use the UP and DOWN button to find the function or colors that you wish to test. Once you find a function or color you wish to test, Press the ENTER button. Now you can adjust the values by pressing UP and DOWN buttons. Once you have finished testing, press the ENTER button.

Tilt Invert – Tilt Inversion

Press the UP and DOWN button until “Tilt Invert” is displayed, press ENTER.

To activate the Tilt inversion press the UP or DOWN buttons until “yes” is displayed, press ENTER to

confirm. To deactivate Tilt inversion, select “No” and Press ENTER.

PAN Invert – Tilt Inversion

Press the UP and DOWN button until “Pan Invert” is displayed, press ENTER.

To activate the Tilt inversion press the UP or DOWN buttons until “yes” is displayed, press ENTER to

confirm. To deactivate Tilt inversion, select “No” and Press ENTER.

Pan Angle – Pan Angle Press the UP or DOWN button until “Pan Angle” is displayed, press ENTER. Press the UP or DOWN buttons to set your rotation.

Page 6

- 6 -

Back LCD – Back LCD

Press the UP or DOWN button until “Black LCD” is displayed, press ENTER. Press the ON or OFF buttons to set your desired LCD mode.

Show Mode – In this mode you can select your desired master mode

Press the UP or DOWN button until “Show Mode” is displayed, press ENTER. Press the UP or DOWN buttons to select your desired master mode.

Slave Mode – In this mode the fixture will be a slave

Press the UP or DOWN button until “Slave Mode” is displayed, press ENTER. Press the UP or DOWN buttons to select Master or Slave mode.

Channel mode – Select the desired channel mode

Press the UP or DOWN button until “Channel mode” is displayed, press ENTER. “X Ch” will now be displayed, “X” represents the displayed channel mode. Press the UP or DOWN

buttons to find the desired channel mode. Press ENTER to confirm.

Wireless DMX

Switch the wireless system on with the on/off switch on the back panel. Press the wireless button on the front panel to connect the system with your wireless transmitter. After the connection is linked the LED will flash faster. To reset the wireless connection, press and hold the button until the LED stops flashing.

Page 7

- 7 -

Operation Instructions

DMX connection.

Master / Slave connection.

Page 8

- 8 -

DMX Channel settings

12 Channel settings:

DMX 12 Channel

DMX

Description

Dimmer

001 - 255

Dimmer 0 – 100%

Macro Color

000 – 009

Unused

010 – 014

Red

015 – 019

Green

020 – 024

Blue

025 – 029

Macro Color 1

030 – 034

Macro Color 2

035 - 038

Macro Color 3

039 – 043

Macro Color 4

044 – 048

Macro Color 5

049 – 053

Macro Color 6

054 – 058

Macro Color 7

059 – 063

Macro Color 8

064 – 067

Macro Color 9

068 – 072

Macro Color 10

073 – 077

Macro Color 11

078 – 082

Macro Color 12

083 – 087

Macro Color 13

088 – 091

Macro Color 14

092 – 096

Macro Color 15

097 – 101

Macro Color 16

102 – 106

Macro Color 17

107 - 111

Macro Color 18

112 – 116

Macro Color 19

117 – 120

Macro Color 20

121 – 125

Macro Color 21

126 – 130

Macro Color 22

131 – 135

Macro Color 23

136 – 140

Macro Color 24

141 – 145

Macro Color 25

146 – 149

Macro Color 26

150 – 154

Macro Color 27

155 – 159

Macro Color 28

160 – 164

Macro Color 29

165 – 169

Macro Color 30

170 – 173

Macro Color 31

174 – 178

Macro Color 32

179 – 183

Macro Color 33

184 – 188

Macro Color 34

189 – 193

Macro Color 35

194 – 198

Macro Color 36

199 – 202

Macro Color 37

203 – 207

Macro Color 38

208 – 212

Macro Color 39

Page 9

- 9 -

213 – 217

Macro Color 40

218 – 222

Macro Color 41

223 – 227

Macro Color 42

228 – 231

Macro Color 43

232 – 236

Macro Color 44

237 – 241

Macro Color 45

242 – 246

Macro Color 46

247 – 251

Macro Color 47

252 - 255

Macro Color 48

Red

000 – 255

Red Dimmer

Green

000 – 255

Green Dimmer

Blue

000 – 255

Blue Dimmer

White

000 – 255

White Dimmer

Strobe 000 – 009

No strobe

010 – 255

Strobe from slow to fast ( 1Hz-25Hz)

Pan

000 – 255

Pan Moving 0-630°

Pan Fine

000 – 255

Speed fine moving

Tilt

000 – 255

Tilt Moving 0-270°

Tilt Fine

000 – 255

Speed fine moving

Function

Over 5 seconds on each value

000 – 127

Unused

128 – 255

Auto sound function

9 Channel settings:

DMX 9 Channel

DMX

Description

Pan

000 – 255

Pan Moving 0-630°

Tilt

000 – 255

Tilt Moving 0-270°

Pan Fine

000 – 255

Pan fine moving

Tilt Fine

000 – 255

Tilt fine moving

Dimmer/Strobe 000 – 200

Dimmer 0-100%

201 – 247

Strobe slow-fast

248 – 255

Full on

Red

000 – 255

Red Dimmer

Green

000 – 255

Green Dimmer

Blue

000 – 255

Blue Dimmer

White

000 – 255

White Dimmer

Page 10

- 10 -

MAINTENANCE

The unit should be cleaned periodically to ensure the optimum performance, the smudginess can decrease the life of light and the output of light is affected by the dust which can make the machine overheating. In general, make the maintenance at least two times a month. Be sure to power off the unit before cleaning .

Do not clean until the unit recovers normal temperature since high temperature for using, use the lens tissue or soft cotton cloth with alcohol to wipe gently.

Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the panel.

Specification

CE (!) : Explanation - This Class-I 2.4GHz equipment can be placed on the market without restrictions.

Please consult the authorities of your own country for detailed information regarding the licensing regime! In the following countries the regulative frequencies are :

NL: 2245-2495.0 MHz, D: 2384.0-2483.5 MHz, B: 2400-2483.5 MHz, F: 2465.0-2475.0 MHz, I: 2215-2500.0 MHz, E: 2304.5-2480.5 MHz, RUS: 2200-2500.0 MHz, CZ: 2200.0-2500.0 MHz, POR: 2483.5 MHz

Pan movement:

630°

Tilt movement:

270°

Beam angle:

10°

Light intensity:

20000 lux @ 2m

No. of LEDs:

7x 15W Quad LEDs

DMX channels:

9 or 12

Connector:

3-pin XLR

Power Supply:

100-240Vac / 50Hz

Dimensions:

273 x 167 x 331mm

Weight:

4.5kg

Page 11

- 11 -

CE & R&TTE Declaration of Conformity

Importer: TRONIOS BV

Bedrijvenpark Twente 415

7602 KM - ALMELO Tel : 0031546589299 Fax : 0031546589298

The Netherlands

Product number: 150.527 Product Description: MHL-715WiSpot 7x 15W QUAD DMX 2.4Ghz

Regulatory Requirement: EN 60598-1/-2-17 EN 55015 EN 61547 EN 61000-3-2/-3-3 EN 300 440-1/-2

The product meets the requirements stated in Directives 2006/95 and 2004/108/EC

and 1999/5/EC and conforms to the above mentioned Declarations.

Almelo, 13-12-2012

Signed: P. Feldman

Page 12

- 12 -

Page 13

- 13 -

Specifications and design are subject to change without prior notice..

www.tronios.com