Up/ Menu key
In standby mode,
to Menu
M2 Shortcut Key
User Manual
Number key
In standby mode, press to
input numbers; Long press
2-9 to speed dial; In editor,
press them to input numbers
or words.
Earpiece
Display
M1 Shortcut Key
Send key
Dial a phone number or
answer a call. In standby
mode, shows the history of
calls made, received and
missed.
# Key
In standby mode,
long press it to
switch the user
profiles. In the
editor , press to
change input
method.
Down key /
In standby mode, to
Phonebook
ӿ Key
In standby mode, press it to
input ӿ / +
In editor, press to input symbols.
End Call / Power
on-off key
English
Beafon S15
General Information
Your phone
Congratulations on the purchase of your Bea-fon S15!
Please read this information before using the phone to make
a better use of your phone. We are not responsible for any
damage due to your misunderstanding of this information
and misacting.
This user manual is for your better use of this phone not an
approval of any accessories. All the pictures in this manual
are for reference only. There may be slight difference
between the appearance of phone/ keys/ contents of display
used in this manual and those of your phone. Please refer to
your phone for actuality. Some features introduced in this
manual are network or subscription-supported features.
Please contact your network operator for further information.
Please check the package contents to ensure that all
components listed below are included. If the product is
defective or if there is a component missing, immediately
contact the retailer where you purchased this handset.
Your Bea-fon S15 box contains:
• 1 mobile phone
• 1 desktop charger
• 1 travel charger
• 1 battery
• 1 headset
• User manuals
If you find the size of the script not easily readable for you,
you can also find this manual on our website, where you will
be able to adjust the size of the script.
Go to: www.beafon.com
Screen Icons
Signal Indicator, More bars indicates stronger signal.
Alarm clock
Battery Level Indicator
Keypad lock
Missed message(s)
Missed call(s)
Silence
Battery
The lithium battery of the mobile phone can be immediately
used after unpacking. A new battery performs best after
performing a full charge/discharge 3 times.
Installing the battery
1. Insert the battery by aligning the gold contacts in the
battery compartment on the phone.
2. Push down on the upper section of the battery until it
clicks into place. Pull down the battery
Removing the battery
1. Ensure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile
phone.
How to insert the SIM card
1. Messages
New message
Inbox
Outbox
Draftbox
Msg settings
Voice Mail
2. Call menu
All Calls
Received calls
Dialed calls
Missed calls
Call duration
3.Contacts
4.Profiles
General
Meeting
Outdoor
Indoor
5.Settings
Phone settings
Display settings
Clock settings
Call settings
Network ettings
Security settings
Factory Settings
SOS settings
6.Tools
Alarm clock
Calculator
Birthday
If you want a mobile Phone that is sophisticated and easy to
use and here it’s in you hands! Naturally you are eager to
star using it, but first you need to insert the SIM card.
Insert the SIM card as follows.
Ensure that the phone is switched off and charger is
disconnected from the phone.
Turn the phone over and remove the back cover.
If the battery is already inside, remove it!
Hold your SIM card with the cut corner oriented as shown
and then slide it into the card holder face down.
Replace the battery first.
Replace the back cover.
How to charge the battery
Your phone is powered by a rechargeable battery.
Connect your travel adapter to the bottom of your
mobile phone or the back of the charger that it has laid
the mobile phone.
Connect the other end of the travel adapter to the mains
socket.
If you are charging the battery when the mobile phone
is switched off, the display will show the battery icon
with the bars moving from up and down .If charging the
battery when the mobile is switched on, the display will
show the battery icon with a lightning strike.
When the battery is fully charge, disconnect the charger.
Note: Please ensure the battery be charged for 12 hours or
more before its first use.
Charger Precautions:
Device should be (placed or situated) near an power outlet
or power supply equipment.
Power on/off
Ensure that you SIM card is in your mobile phone and that
the battery is charged.
Please hold END key to Power on/off the phone. The phone
will automatically search for the network.
Display information
Besides sending and receiving calls, you can also do:
In the standby mode, press Menu key to enter main Menu.
In the standby mode, press down key to view phone book
list.
In the standby mode, press Send key to enter call list.
In the standby mode, press M1 key to call favorite Number.
In the standby mode, press M2 key to call favorite Number.
Menu tree
Write text
Change input mode: press # key to change the input mode
(input modes: ABC, Abc, abc, 123)
In the abc/ABC input, press the number keys 2-9 to input
letters. Please input the characters followed the order
according to the letters on the keys. Press the key once to
input the first letter, press it twice to input the second one
and so on.
In the 123 input, Press the keys to input the corresponding
numbers.
Input Symbol: Press the “*”key to select the symbol that you
want.
Input Space: Press 0 key to input space, it does not word in
123 mode.
Delete Character: Press M2 key to clear a character. Press
and hold M2 key to delete all characters and clear the display.
Move cursor to left or right: Press the Up/down navigation
keys to move the cursor left or right.
How to add contact to your phone books
There are someone who you want to call again and again so
it makes sense to add these to your phone book. You can
then access these numbers quickly and easily.
Select Menu then contacts.
Press Menu key to view the phone book list, and then select
one to press the M1 key to select Add new entry.
Select whether to save the new contact to your SIM card or
to the phone’s memory.
Enter the contact’s phone number.
Press M1, then enter a name and confirm by M1 key.
If SIM card is selected to save new contact, you can enter
name and number.
If phone is selected to save the new contact. Name, Number,
To delete someone from your phone book list, first select the
name, then press Menu key and choose Delete.
How to make and receive calls
To most basic way to make a call is to key in the number in the
standby mode and press the send key. One advantage of a
mobile phone is that you can also store people’s names and
numbers in your mobile phone book and call then more easily.
To call someone:
Select menu then contacts. From here use the
Up/down keys to find the name of the person you want
to call. You can also type in the first letter of the name
of the person you want to call.
Now simply press Send key.
To receive call: press Send key.
To end the call: Press End key.
Make sure you are in an area with sufficient coverage to
make calls. The strength of the network signal is indicated on
top left corner or screen.
How to send and receive text messages
You can use your mobile phone to send and receive text
message.
1. Go to Menu→Messages→new message.
2. Write your message. For more information on writing,
see section ‘writing text’.
3. Press M1 key and select done to send and save the
message. Select send to send the message to one
person.
Select send and save to send the message and save it
to Outbox, select save as draft to save it to Draft box.
4. Enter the recipient’s phone number or select from
phone book if you have previously stored the person’s
number in it. Then select M1 key to send the message.
Upon receiving a message, the mobile phone indicates with
ring tone, prompt, or a new message icon.
1. Press Menu key select to open the new message. You
can also go to inbox to read the message.
2. Use Up/Down keys to read the message.
3. While the message is open, use M1 key to Reply,
Delete, Forward, Call sender, Extract No.
Shortcut Key
Electric Torch Shortcut Key
Press the Electric Torch Shortcut Key to switch on/off the
electric torch.
Speed dialing:
It is possible to enter 10 speed dial numbers that can be
called from the stand-by mode by pressing the
corresponding number keys (2~9, * and #).
M1/M2 Shortcut Key
Press the M1/M2 Shortcut Key to call the Favorite number
Edit: You can edit the M1/M2 number.
Go to Settings—Call settings, edit M1M2 number, press the
soft key M1 to the standby set the number of Favorite.
SOS Settings
Press the SOS Shortcut Key to dial the SOS number. If the
number is empty, you can set.
SOS Setting
You can set On or Off. Select One Key help setting this item,
Press the Up/Down key to select on or off.
Call waiting timer
You can select 1 Second/3 Seconds/ 5 Seconds/10 Seconds.
For example: Chooses for 1 second to press the M1 key
save your selection;
SOS Number:
You can set one key help number.
State Light
You can set On or Off. Chooses One Key Help light this item
Press the Up/Down key to select on or off.
SOS Message: You can set ON or OFF. You have to choose
the "SOS SMS" option and then Press the Up/Down key to
select on or off.
SOS message edit
You can set a key to help the messages content.
To lock or unlock the keypad
Switch the unlock key, which is on the left side of the phone.
Basic Specifications
Network：GSM 900/DCS1800
Dimension：110mm*52mm*14.6mm
Battery：1000mAh
Waiting time：about 100～140hours*
Talk time：about 6～8 hours*
*Variation in operation times may occur depending on SIM
card, network, and usage settings, usage style and
environments.
Care and Maintenance
Battery and Charger Safety
Only use batteries approved by the phone
manufacturer.
Your device is powered by a rechargeable battery. The
full performance of a new battery is achieved only after
two or three complete charge and discharge cycles.
The charging time depends on the charger and the
battery used.
The battery can be charged and discharged hundreds of
times, but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal,
Trouble
Possible reasons
The phone
1. Is there any power in the battery?
2. Is the battery installed properly?
Battery cannot
1. Check if the charger is connected with the
2. Is the battery usable? The performance of
3. Is the battery completely discharged? The
Fails to register
1. The signal is too weak, or there may be
2. Is the SIM card installed properly, poorly
Cannot call out
1. Is the SIM card registered in the network?
2. Is call barring enabled?
3. Calling prohibited due to call charges not
4. Have you enabled the function of FDN?
5. Have you selected line 2 though your
Cannot call in
1. Is the SIM card registered in the network?
2. Incoming call prohibited due to call
3. Is call diverting enabled?
4. Is the "Bar incoming call" function in call
PIN locked
Input the PUK code supplied with the SIM
Call charge
meter invalid
No metering pulse is transmitted. Please
contact your network operator.
SIM error
1. SIM card is dirty. Clean it.
2. Reinstall the SIM card.
3. SIM card is damaged. Replace it.
replace the battery.
If unused, a fully charged battery will lose its charge.
When the charger is not disconnecting it from the power
source. Do not leave the battery connected to the
charger and power source for longer then necessary as
overcharging it will shorten its life.
Leaving the battery in hot or cold place, such as in a
closed car in summer or winter conditions, will reduce
the capacity and lifetime of the battery. A device with a
hot or cold battery may not work temporarily, even when
the battery is fully charged. Battery performance is
particularly limited in temperatures well below freezing.
Do not short-circuit the battery. Accidental
short-circuiting can occur when a metallic object causes
a direct connection between the + and – terminals of the
battery. Short-circuiting the terminals may damage the
battery or the connecting object.
Do not dispose of the battery in a fire.
Phone Maintenance
Your device is a product of superior design and chairmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
Keep the phone and all the parts and accessories (for
example, SIM card) out of the reach of small children.
Do not use or store the phone in dusty or dirty locations. Its
moving parts and electronic components can be damaged.
Do not use or store the phone in excessively hot places.
High temperatures will shorten the life-span of the phone,
damage the battery, and warp or melt the plastic used in the
phone’s manufacture.
Do not store the phone in excessively cold places. When the
phone returns to its normal temperature, moisture can form
inside the phone, causing damage to the electronic circuits.
Do not mishandle or abuse the phone. Dropping, knocking or
shaking it can damage the internal circuits.
Do not use harsh chemicals, strong detergents, or cleaning
solvents to clean the phone. If you must clean it, then use a
soft, clean and dry cloth.
Do not paint the phone. Paint can clog the moving parts and
prevent proper operation.
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the device and may violate regulations governing
radio devices.
If the phone or any of the accessories are not working as
they should, please consult your dealer who can provide you
with the expert assistance required.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
FAQ
If your phone appears the questions frequently, please refer
to the answers as follows. After that, you cannot solve the
questions, please contact with the mobile phone dealers or
service provider.
Certification information (SAR)
This model phone meets the EU requirements for exposure
to radio waves.
The exposure standard for mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or
SAR. The SAR limit recommended by The Council of the
European Union is 2.0 W/kg. Tests for SAR have been
conducted using standard operating positions with the phone
transmitting at its highest certified power level in all tested
frequency bands.
The highest SAR value for this device when tested at the ear
was 0.431 W/kg 10g Head Tissue (GSM 900)and the highest
tested SAR value is 1.068 W/kg 10g Head Tissue (DCS
1800).
Liability Disclaimer
Bea-fon Mobile GmbH shall not bear any liability for any
relevant, indirect, special, incidental, or inevitable injuries
caused by using of this product, including injuries which have
been considered, or unconsidered, likely to happen
Product safety information
Do not switch on the phone when wireless
phone use is prohibited or when it may cause
interference or danger.
Road safety comes first
Do not use a hand-held phone while driving.
Switch off in aircraft
Wireless devices can cause interference in
aircraft.
Switch off in hospitals
Follow any regulations or rules. Switch the
phone off near medical equipment.
Switch off when refueling
Do not use the phone at a refueling point. Do
not use near fuel or chemicals.
Interference
All wireless phones may get interference,
which could affect performance.
Loading...