NO. Picture QTY
A 1
B 2
C 1
①
11
②
11
③
1
Assembly instructions
Caution: You must read this before you proceed
BENCH
CAUTION: This bench is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Allen Wrench(8mm)
Parts list
Description
Bench Seat
Leg with pre-attached Levellers
Hard ware
Studs(M8*16)
Washers(8mm)
Leg Support
1 OF 5
Assembly Step
This Bench has multiple parts and may require up to some 30 minutes to
assemble.
To give you an overview of the Bench parts, the above picture is to help you
put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Assembly Preparation
Before Beginning Assembly:
Overview
Bench Seat(A)
FRONT FACING
Leg with
pre-attached
Leveller(B)
Leg Support (C)
2 OF 5
Unpack and place all parts onto a clean soft surface.
Attach Leg with pre-attached Levellers(B) and Leg Support(C) with Bolts(①)
and Washers(②) by Allen Wrench(③).
DO NOT OVERTIGHTEN.
B
③
①
C
A
3 OF 5
Turn the Bench rightside up.
Adjust the pre-installed Leveller until the Bench is level with the ground.
Then, proceed to tighten all Bolts and Nuts.
Your Bench is ready for use.
Caution: This Bench can only be used on a flat, level surface.
Turn the Bench Seat(A) upside down on to a soft surface to avoid
scratching.
Attach Leg with Pre-attached Levellers(B) to the mounting position on the
Bench Seat(A) with Bolts(①), Washers(②) by Allen Wrench(③).
DO NOT OVERTIGHTEN.
Adjust height
for balance
Adjust low
for balance
4 OF 5
5 OF 5
Loading...