BE WHIRL-A-WAY Operation Manual
operation manual
Model #
85.403.014
14”
WHIRL-A-WAY
85.403.014 Manual Curtis Dec 9 2014.indd 1 11/13/2015 8:02:51 AM
2
85.403.014 Manual Curtis Dec 9 2014.indd 2 11/13/2015 8:02:51 AM
3
Introduction
4 Using the Operator’s Manual
Product Identification
5 Record Identification Numbers
Pre-Operating Instructions
6 Before You Begin
6 Intended Use
6 Care
Operating
7 Operating
Recommended Applications
7 Use with a Gun and Lance
7 Attach to Long Wand
Parts List
8 Parts List
Warranty
9 Warranty
table of contents
85.403.014 Manual Curtis Dec 9 2014.indd 3 11/13/2015 8:02:51 AM
4
Using the Operator’s manual
The operating manual is an important part of your 14” Whirl-A-Way and
should be read thoroughly before initial use, and referred to often to make
sure adequate safety and service concerns are being addressed.
Reading the owner’s manual thoroughly will help avoid any personal injury
or damage to your Whirl-A-Way. The information in this manual will offer
you the most effective tools for cleaning as well as the safest. By knowing
how best to operate this machine you will be better positioned to show
others who may also operate the unit.
This manual contains information for the complete range of BE Whirl-AWays, and is placed in order starting from the safety requirements to the
operating functions of your pump. You can refer back to the manual at any
time to help troubleshoot any specific operating functions, so store it with
the machine at all times.
Attention: Read through the complete
manual prior to the initial use of your
Whirl-A-Way.
introduction
85.403.014 Manual Curtis Dec 9 2014.indd 4 11/13/2015 8:02:51 AM
5
product identification
Record Identication Numbers
14” Whirl-A-Way
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the product
model and identification numbers.
You will need to locate the model and serial number for the pump and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identication Numbers
Model Number:
85.403.014 Manual Curtis Dec 9 2014.indd 5 11/13/2015 8:02:51 AM
6
WARNING
This product uses extreme water pressure and water force. This may
cause kickback when using the cleaner.
Pre-Operating Instructions
Before You Begin
Prior to initial operation of the unit carefully read the information
outlined in the operation instructions.
• Ensure that all components are in good working order and that they
operate safely.
• Do not use cleaner if any part is not in proper working condition.
• No modifications permitted on the machine.
• Before operation test the cleaner at low pressure (1500 PSI) to ensure you
can operate safely at high pressures.
Intended Use
The Whirl-A-Way is suitable for cleaning floors and walls in conjunction
with a high pressure cleaner.
(A) Recommend Operating pressure: 2000-3600 PSI
(B) Maximum pressure: 4000 PSI
(C) Maximum water temperature: 85°C/180°F
• Never exceed maximum operating pressure and temperature.
pre-operating instructions
The surface Cleaning System you have purchased connects directly to a
1/4” quick connect coupler, operating to a maximum of 4000 PSI.
This 14” Whirl-A-Way is designed to operate with cold water pressure
washers. We do not recommend the use of hot water as the nylon brush
skirt will soften and wear prematurely, voiding any warranty.
Before operation ensure that the pressure washer is on low pressure when
first using the Whirl-A-Way. Adjust pressure with adjustable unloader.
Please dispose of packaging environmentally responsibly
The packaging materials are recyclable. Please do not throw the packaging
in the household rubbish but take it to a recycling centre.
Care
•Protect from frost/ freezing.
•Ensure bristles are not deformed during storage.
85.403.014 Manual Curtis Dec 9 2014.indd 6 11/13/2015 8:02:51 AM
Loading...