BE SP-550SD, SP-900SD, SP-750TD, ST-900SD Operation Manual
operation manual
Model #
SP-550SD
SP-900SD
SP-750TD
ST-900SD
Grounding
The grounding conductor of the power cord and switch are terminated
in listed double crimpled closed loop connectors that are secured to the
motor enclosure by a screw that engages at least two threads into metal
and star washer or lockwasher. Connectors are secured using crimping
tool recommended by the manufacturer.
WARNING
This product contains lead, a chemical known to the State of California to cause birth
defects or other reproductive harm. Wash your hands after handling this product.
WARNING
This product contains chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
2
Using the Operator’s manual
The operating manual is an important part of your Submersible Pump and
should be read thoroughly before initial use, and referred to often to make
sure adequate safety and service concerns are being addressed.
Reading the owner’s manual thoroughly will help avoid any personal injury
or damage to your pump. The information in this manual will offer you the
most effective tools for cleaning as well as the safest. By knowing how
best to operate this machine you will be better positioned to show others
who may also operate the unit.
This manual contains information for the complete range of BE submersible pumps, and is placed in order starting from the safety requirements
to the operating functions of your pump. You can refer back to the
manual at any time to help troubleshoot any specific operating functions,
so store it with the machine at all times.
Attention: Read through the complete
manual prior to the initial use of your
Submersible Pump
introduction
3
product identification
Record Identification Numbers
Submersible Pump
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the
product model and identification numbers.
You will need to locate the model and serial number for the pump and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number:
4
diagrams
C
8
9
B
1
2
3
4
5
6
7
1¼”
32mm
1”
25mm
½”
13mm
5
/8”
15mm
¾”
19mm
D E
Loading...