BE P2014EN Operation Manual
ELECTRIC
PRESSURE WASHER
P2014EN
Operation Manual
94237-DM
TABLE OF CONTENTS
AA
BB
CC
DD
Screw
Qty. 2
Axle Pin
Qty. 2
Screw
Qty. 2
Cotter Pin
Qty. 2
This product can expose you to chemicals
including lead, which is known to the State
of California to cause cancer and birth
defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
Wash hands after handling.
!
PACKAGE CONTENTSPACKAGE CONTENTS
Product Specifications .......................................................................... 2
Package Contents ....................................................................................3
Hardware Contents .................................................................................3
Safety Information ...................................................................................4
Assembly Instructions ............................................................................8
Operating Instructions .......................................................................... 13
Care and Maintenance ............................................................................16
Pump Saver ................................................................................................18
Troubleshooting ........................................................................................19
Limited Warranty .....................................................................................20
Replacement Parts List ..........................................................................21
PRODUCT SPECIFICATIONS
SPECIFICATIONS
Max PSI
Model
(lbs/sq. in.)
P2014EN 2050 1.4
Max GPM
(Gal/per min)
Cold
Water Volts Amps
ü
120 13 36.4
Weight
(lbs.)
A
O
N
M
L
K
J
H
*I
PAR T DESCRIPTION QTY
A Hose Holder 1
B Handle 1
*C Rotary Nozzle 1
D O-Ring Replacement Kit 1
*E Quick Connect Nozzles 4
F Power Washer Unit 1
G Lower Frame 1
H Nozzle Holder 1
*I Extension Lance 1
J Wheels 2
AA
B
DD
PW909383SS
*C
G
D
*E
Soap – Black
0° – Red
15° – Yellow
25° – Green
PAR T DESCRIPTION QTY
K Spray Gun 1
L Spray Gun Trigger
Lock
M Spray Gun Holster 1
N Soft PVC Hose 1
O Nozzle Cleaning Wire 1
AA Axle Pin 2
BB Screw 2
CC Screw 2
DD Cotter Pin 2
BB
CC
F
1
2 3
*Packaged on the power washer unit.
HARDWARE CONTENTS
SAFETY INFORMATION
SAFETY INFORMATION
SAFETY INFORMATION
SAFETY INFORMATION
Please read and understand this entire
manual before attempting to assemble,
operate, or install the product.
This manual contains information that
relates to PROTECTING PERSONAL
SAFETY and PREVENTING EQUIPMENT
PROBLEMS. It is very important to read
this manual carefully and understand it
thoroughly before using the product. The
symbols listed below are used to indicate
this information.
DANGER
Potential hazard that will result in
serious injury or loss of life.
WARNING
Hazard that could result in serious
injury or loss of life.
CAUTION
Potential hazard that may result
in moderate injury or damage to
equipment.
Note: The word “Note” is used to inform
the reader of something the operator
needs to know about the tool.
WARNING
To reduce the risk of injury, the user must
read and understand the instructions
before using this product.
1. Warning – When using this product
basic, precautions should always be
followed, including the following
2. Read all the instructions before using
the product
3. Know how to stop the product and
bleed pressures quickly. Be thoroughly
familiar with the controls.
4. Keep operating area clear of persons
5. Do not overreach or stand on unstable
support. Keep good footing and
balance at all times.
6. Follow the maintenance instructions
as specified in the manual
7. To avoid personal injury and/or
damage to property and to maximize
your power washing experience,
carefully follow all of the safety tips,
instructions, warnings and safeguards
and become familiar with all of the
controls.
8. This power washer conforms to
CSA and other safety and consumer
standards. DO NOT modify or rebuild
any part of your power washer.
9. DO NOT use your power washer
when you are under the influence of
alcohol or drugs. Use this power tool
carefully and only when you are alert.
10. Watch your balance and footing while
using your power washer. Surfaces
become slippery when wet and are
extra slippery when using a detergent
or cleaner.
11. NEVER operate the power washer in
bare feet, sandals, or open-toed shoes.
12. When using the power washer near
children, make sure they are closely
supervised by an adult to avoid injury.
NEVER let a child use the power
washer.
13. Keep fingers, hands, feet and any
part of your body clear of the stream
of high pressure water. The powerful
spray can cause blindness or blast
holes in the skin. It can break a
window if you are too close when you
pull the trigger on the spray gun.
14. ALWAYS wear eye protection to
prevent injury to eyes when operating
the power washer.
15. To avoid mishaps or injury, ALWAYS
use the trigger safety lock when not
using the power washer even if the
spraying stops for a moment.
16. The power washer is equipped with
a Ground Fault Circuit Interrupter
(GFCI) which greatly reduces the
chance of electric shock while the unit
is in use. If replacement of the plug
or cord is needed, use only identical
replacement parts.
17. Point the spray gun in a safe direction
when beginning a power washing
session.
18. NEVER spray directly at a person,
animal, electrical device or the unit
itself.
19. When first using the spray gun, hold
the spray gun and lance with two
hands when pulling the trigger (one
hand to pull the trigger and the other
to stabilize the gun assembly) until
you get used to the “kickback” from
the spray gun.
20. When you press the power switch
to turn o the power washer, water
pressure may remain in the system.
To discharge the pressure, point the
spray gun in a safe direction and pull
the trigger.
21. NEVER spray flammable liquids.
22. NEVER use the power washer in areas
that contain combustible dust, liquids
or vapors.
23. Avoid contact of the pressure hose
with sharp objects and examine the
hose regularly. Replace if damaged.
Due to the high pressure involved, it
cannot be repaired if cut or damaged.
24. Only use detergent specifically
formulated for power washers and
follow instructions on the detergent’s
label.
25. Protect eyes, lungs, and skin from
exposure to detergent. Dish or
laundry soap is too thick and will clog
the nozzle of your detergent bottle.
IMPORTANT: Store the power washer
indoors to prevent the water in the
unit from expanding under freezing
4 5
conditions. When the water freezes and
expands, your power washer will be
damaged and become inoperable. Or, if
storing outdoors, it is recommended you
use pump saver (not included) to protect
pumps.
26. NEVER use hot water with your power
washer. It will overheat and damage
the high pressure pump.
27. NEVER leave the power washer
unattended while it is powered “ON”.
28. ALWAYS turn the water supply “ON
” before turning the power washer
power to “ON”. Running the pump
dry will cause damage to the internal
components.
29. NEVER use a water supply to your
power washer that exceeds 150 PSI
maximum.
30. NEVER disconnect the high pressure
hose from the power washer while the
system is pressurized.
31. NEVER permanently engage the
trigger mechanisms on the spray gun.
32. NEVER operate the power washer
unless all components are properly
and securely connected.
33. NEVER allow the power washer pump
to run for more than one minute after
you have turned o the water supply.
This can cause the motor and pump to
overheat and fail.
34. NEVER use lances or other parts that
are not compatible for this specific BE
unit.
35. NEVER USE AN EXTENSION
POWER CORD since it defeats
the eectiveness of the GFCI and
increases the chance of electrocuting
the operator.
36. NEVER spray any electrical outlet with
your power washer.
37. Inspect the power cord before using.
DO NOT use it if it is damaged.
Servicing of a Double-Insulated
Appliance
Ground Fault Circuit Interrupter
Protection:
This pressure washer is provided with a
ground-fault circuit-interrupter (GFCI)
built into the plugs of the power-supply
cord. This device provides additional
protection from the risk of electric shock.
Should replacement of the plug or cord
become necessary, use only identical
replacement parts that include GFCI
protection.
In a double-insulated product, two
systems of insulation are provided
instead of grounding. Grounding means
are not provided for a double insulated
product, nor should grounding means be
added to the product.
Servicing a double-insulated product
Double Insulated
Product
requires extreme care and knowledge of
the system, and should only be done by
qualified service personnel.
Replacement parts for a double-insulated
product must be identical to the original
parts.
A double-insulated product is marked
with the words “Double Insulation” or
“Double Insulated”. Product may also be
marked with symbol shown here.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
6 7
Loading...