BE AC153 Operation Manual
operation manual
AC153
PORTABLE AIR
CAUTION READ THIS MANUAL CAREFULLY before operating or servicing this
air compressor, to familiarize yourself with the proper safety, operation, and standard
operating procedures of this unit. FAILURE TO COMPLY WITH INSTRUCTIONS IN
THIS MANUAL COULD RESULT IN THE VOIDING OF YOUR WARRANTY, AND
PERSONAL INJURY, AND/OR PROPERTY DAMAGE. THE MANUFACTURER
OF THIS AIR COMPRESSOR WILL NOT BE LIABLE FOR ANY DAMAGE
BECAUSE OF FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL.
By following the instructions and recommendations in this manual you will ensure a
longer and safer service life of your air compressor.
2
table of contents
Introduction
4 Using the Operator’s Manual
4 Specifications
Product Identification
5 Record Identification Numbers
Safety
6 Receipt and Inspection
7 Safety Instructions
7 Hazard Symbols and Meanings
8 Air Tank Warning
8 Fire Warnings
8 Breathable Air Warning
9 Electric Shock Warning
9 Air Tools and Accessories Warning
10 General Safety Information
11 Spraying Precautions
11 Hose Precautions
Installation & Grounding
12 Installation and Location
12 Grounding Instructions
13 Extension Cords
Air Compressor Components
14 Air Compressor Breakdown
Assembly
15 Assembly Instructions
Operation
16 Preparation for Starting
17 Operation and Adjustment
3
table of contents
Maintenance
18 Maintenance
18 Daily
18 Weekly
19 Monthly
19 3 Months or 500 Operating Hours
19 12 Months or 1000 Operating Hours
Caution
19 Caution
Exploded View
20 Exploded View Diagram
21 Exploded View List
List of Goods
22 List of Goods
Troubleshooting
23 Troubleshooting Chart
4
Using the Operator’s manual
Thank you for purchasing a BE Air Compressor. Your machine is
designed for long life, dependability, and the top performance you
demand! Please take time now to read through this manual so you better
understand the machine’s operation, maintenance and safety precautions.
Everyone who operates this machine must read and understand
this manual. The time you take now will prolong your machine’s life and
prepare you for its safe operation. Enjoy the exceptional performance of
your BE Air Compressor, the industry leader!
The manufacturer reserves the right to make improvements in design
and/or changes in specifications at any time without incurring any
obligation to install them on units previously sold.
Attention: Read through the complete manual
prior to the initial use of your compressor.
introduction
Item Data
Model AC153
Power 1Kw/1.5HP
Voltage 100V/110V/120V
Frequency 60HZ
Motor Poles 2P
Rated Speed 3450r/min
Current
6.5A~8A
Theoretic 5.1~5.8 CFM
Discharge 115PSI/0.8MPa
Restart 70 PSI/0.5MPa
Tank Capacity 10L
Dimensions 53×25×56cm
Air Outlet Size 1/4”
Net Weight 18kg
SPECIFICATIONS
5
product identification
Record Identification Numbers
Compressor
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the
product model and identification numbers.
You will need to locate the model and serial number for the machine and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number:
6
safety
Receipt and Inspection
Before signing the delivery receipt, inspect for damage and missing parts.
If damage or missing parts are apparent, make the appropriate notation
on the delivery receipt, then sign the receipt. Immediately contact the
carrier for an inspection. All material must be held in the receiving location
for the carrier’s inspection. Delivery receipts that have been signed
without a notation of damage or missing parts are considered to be delivered
“clear.” Subsequent claims are then considered to be concealed
damage claims. Settle damage claims directly with the transportation
company.
If you discover damage after receiving the air compressor (concealed
damage), the carrier must be notified within 15 days of receipt and an
inspection must be requested by telephone with confirmation in writing.
On concealed damage claims, the burden of establishing that the
compressor was damaged in transit reverts back to the claimant.
Read the compressor nameplate to verify it is the model ordered, and
read the motor nameplate to verify it is compatible with your electrical
conditions. Make sure electrical enclosures and components are
appropriate.
7
The safety alert symbol ( ) is used with a signal word (DANGER,
CAUTION, WARNING), a pictorial and/or a safety message to alert you
to hazards.
DANGER WILL cause DEATH, SEVERE INJURY or substantial
property damage.
WARNING CAN cause DEATH, SEVERE INJURY or substantial
property damage.
CAUTION WILL or CAN cause MINOR INJURY or property damage.
NOTICE indicates a situation that could result in equipment damage.
Follow safety messages to avoid or reduce the risk of injury or
death.
Save these Instructions
Safety Rules
safety
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey
all safety messages that follow this symbol to
avoid possible injury or death.
explosion
kickback
fall fluid
injection moving parts read manual
hot
surface wear eye
protection
slippery
fire electric
shock toxic fumes
Hazard Symbols and Meanings
8
WARNING
AIR TANK WARNING: Drain liquid from air tank daily,
or after each use, using the drain valve located on the
bottom of the lower air tank. Failure to properly drain
liquid from the tank will cause rust from moisture buildup, which weakens the tank and could lead to a violent
tank explosion, Periodically inspect the tanks for unsafe
conditions such as corrosion.
Never attempt to repair or make modifications to the tank or its attachments. Welding, drilling or any other modifications may weaken
the tank, which may result in damage from rupture or explosion. Never
remove or attempt to adjust the pressure switch, safety valve, or other
factory set operating pressures.
WARNING
FIRE WARNING: Avoid dangerous environments. Do
not use compressor near gasoline or other flammable
materials. Keep work area well lit. Normal sparking of
a motor or sparking from grinding metal could ignite
fumes. Do not spray flammable materials in the vicinity
of an open flame or other ignition source, including the
air compressor itself. Do not direct paint or other spray
material towards the compressor.
Read and follow all safely instructions for the material you are spraying. Be sure to use an approved respirator designed for use with your
specific application.
WARNING
BREATHABLE AIR WARNING: This air compressor in
not designed, nor intended for the supply of breathable
quality air. Air produced by this unit may contain carbon
monoxide or other toxic vapors.
Do not inhale air from the compressor or from a breathing device connected to it.
safety
Loading...