BDI STREAM 1643, STREAM 1646, STREAM 1642 Assembly & Instruction Manual

STREAM™

1642/1643/1646

TABLE COLLECTION

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Stream table collection is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.

Stream is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.

Step 1

Unpack and identify the parts listed. Open boxes, but DO NOT
REMOVE SHELVES. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact
BDI Customer Service at: [e-mail].

[e-mail]

bdiusa.com

T1 Allen Wrench x 1

H1 Socket Screw x 4

All Glass x 8

H2 Long Socket Screw
x 4

A Glass Top x 1
All Glass x 2

B Metal Leg x 2

For all other concerns, please contact your BDI retailer.

C Lower Wood Shelf x 1

Designed by Cristian Wicha.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Stream & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 08.25.2016 V2

Step 2 - Attach Legs to Glass Top
Using the illustration as a guide, attach the Metal Legs B to the Glass Top A as shown using the Socket

Screw H1 and Allen Wrench T1. This should be done BEFORE removing top from the box so that Glass Top
A is not scratched prior to assembly.

Step 3 - Attach Wood Top

Carefully rotate 90 degrees so that the table is resting on its side on a non-marring surface. For easiest
installation find a paperback book about 1” thick and place on floor between Metal Legs B as shown below,or
find non-abrasive materials to temporarily cover inside edge of legs.

Carefully slide Lower Wood Shelf C into place being careful not to bump the Metal Legs B. Rest the Lower

Wood Shelf C on the book and attach using the Long Socket Screw H2 and Allen Wrench T1.

Paperback book

1” thick

2

STREAM

TABLE COLLECTION

bdiusa.com

[e-mail]