BDI RADIUS 8839 Assembly Instructions Manual

RADIUS™ 8839
MEDIA CONSOLE
Product Registration
Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Radius Media Cabinet is designed for indoor use on level floors. Clean painted surfaces and steel parts with a moist cloth.
Radius is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, contact BDI Customer Service at: customerservice@bdiusa.com. For all other concerns, please contact your BDI retailer.
bdiusa.com
customerservice@bdiusa.com
T1 Hex Wrench x 1
H1 1/4-20 x 25 mm
Flathead Screw x 8
H2 1/4-20 x 80 mm Screw x 6
Designed by Alyssa Coletti. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Radius & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI Made in China. 4.24.2018 Rev1
A1 Cabinet x 1
A2 Base Rail x 2
A3 Leg x 2
C1 Shelf x 2
Step 2 - Assemble the base
Attach the 2 legs A3 to 2 base rails A2 with 8 flathead screws H1 using hex wrench T1. Make sure the countersunk holes on the legs are positioned on the outside.
A3
T1
A3
H1 x 4
H1 x 4
H1 x 4
A2
Step 3 Attach the base
With help from another person, carefully position the cabinet on its back. Attach the base using 6 screws H2 going through the base rail and into the threaded holes on the bottom of the cabinet. Tighten with hex wrench
T1.
2 Person Ta sk
2
RADIUS 8839 MEDIA CONSOLE
H2 x 6
T1
bdiusa.com
customerservice@bdiusa.com
Step 4 Stand Up / Level your unit
With help from another person, carefully position the cabinet onto its base. Check to make sure the cabinet is level and that all legs are touching the ground. Adjust levelers if needed.
STEP 5 - Adjust Shelves
The 2 shelves C1 in your Radius Media Cabinet are adjustable. Shelf pins may be unscrewed and moved up or down.
STEP 6 - TV Safety Strap
Your Radius Media Cabinet is equipped with a TV safety strap. If using a TV, locate the bundled strap tucked inside the back of the cabinet, unravel and connect the 2 loose ends of the Y strap to your TV. See hang tag for detailed instructions.
2 Person Ta sk
C1
C1
Shelf Pins Levelers
TV Saftely Strap
3
RADIUS 8839 MEDIA CONSOLE
down
bdiusa.com
customerservice@bdiusa.com
Loading...