OLIS™ 9650
2 DOOR CONSOLE
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Olis Console is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
Olis is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing
hardware pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
C5 Right Door Pull x 1
bdiusa.com
customerservice@bdiusa.com
T1 Phillips Screwdriver x 1
T2 Hex Wrench x 1
H1 1/4-20 x 25 mm FH
Machine Screw x 4
H2 1/4-20 x 15 mm
Machine Screw x 10
H3 #6 x 5/8" Flathead
Wood Screw x 4
C3 Curved Back Panels x 2
C4 Left Door
Pull x 1
C1 Cross Bar x 1
Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Olis & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI
Made in China. 08.08.2017 V1
A1 Cabinet x 1
C2 Leg Frame x 2
Step 2 - Attach the 2 leg frames C2 to cross bar C1 with 4 screws H1 using hex wrench T2.
Make sure all tabs face downward.
H1
T2
C1
C2
All tabs face down
C2
Step 3 - With help from another person, carefully position the cabinet A1 upside-down (as shown) or on its
back. Attach the base to the cabinet with 10 screws H2 using hex wrench T2. Do NOT fully tighten until all 10
screws are started.
H2 x 10
2 Person Ta sk
T2
2
OLIS 9650
2 DOOR CONSOLE
bdiusa.com
customerservice@bdiusa.com
Loading...