BDI Float Collection User Manual

Your Float™ Table is engineered for easy assembly. Carefully follow this procedure to
prevent any damage.

Placement and Maintenance
Float™ Tables are designed for indoor use on level floors. Clean glass with glass cleaner;
steel parts and wood top with a moist cloth.

NOTE: This instruction sheet is intended for the entire Float

™

Table collection; model

2601G is shown for illustration.

www.bdiusa.com

[e-mail]

A - Top

x 1

B - Pucks

(pre-installed)

x 3 or 4

C - Steel Leg

x 3 or 4

Step 1

Unpack and identify the parts shown. The assembly workspace should be a clean
non-marring surface such as carpet. For missing hardware pieces, please contact BDI
Customer Service at: [e-mail] For all other concerns please contact your
local BDI Retailer.

Step 2
Lay Top (A) so that the pre-installed Pucks (B) are facing up.

Step 3

After threading Leverler Glides (E) into Steel Legs (C), attach Steel Legs (C) to Pucks (B)
using Screw (D) and Hex Wrench (F).

Step 4
Adjust the Leveler Glides (E) to level table as needed.

D - Screw

x 6 or 8

E- Leveler Glides

x 3 or 4

F - Hex Wrench x 1

3/2008

Designed by Al Glass.
‘Float’ is a trademark of Becker Designed, Inc. All rights reserved.
©2008 Becker Designed, Inc.

TM

Float

Collection

Assembly Instructions